Pipe Conveyor Belt
Dear Mr. Filuyang,
Please write to BRIDGE STONE,Japan or PHOENIX YULE ,UK for information.
Regards.
A.Banerjee ■
Pipe Conveyor Standards
Dear Mr. Filuyang,
There is (among others) one aspect that you should be very aware of with pipe conveyors. Where a sufficient number of standards exist on the construction of conventional or troughed belt conveyors, no such standards exist for pipe conveyor belting. Therefore, contacting a belt manufacturer gives you only an opinion, no relation to any engineering standards. If you have any specific questions on this subject, I will be more than pleased to help you out.
Kind regards,
Prof.dr.ir. Gabriel Lodewijks ■
Pipe Conveyor
Dear Mr. Filuyang,
I am ready to give all information related to pipe conveyor. But please be specify. I have one problem. That is I do not know how to attached ducument in the reply.
Regards.
A. Banerjee ■
Re: The Construction Of Pipe Conveyor Belt
Dear all:
thank you very much for your reply.
I am sorry. I am a undergraduate, I just only want some information about the typical cross section of the pipe conveyor belt.
filuyang22@hotmail.com ■
Attaching A File
Dear Mr. Banerjee,
If you post a reply, you see this information in the lower part:
Attach file:
Maximum size: 524288 bytes
Valid file extensions: gif jpg png txt zip bmp jpeg
There appears a little search window, and you click on "search" and mark the file you want to attach. And if all is ready, you press the "Submit Reply" button at the bottom line.
I think you will not have any problems. If your file is too large, then you have to reduce its size by using the Photoshop program.
You have to attach the file right from the beginning, it does not work anymore once you have submitted the reply, i.e., you cannot attach the file at a later correction stage, for instance.
Please try it out and let me know where your specific problem might be.
Reinhard Wohlbier
wohlbier@bulk-online.com ■
Contitech Belts
Hi,
Beumer always very successfull uses Contitech belts (www.contitech.de) for its pipe conveyor supplies. You may contact Dr. Flebbe (ph.: +49 (5551) 706-0) from R&D there for details about the belt design.
Holger ■
Re: The Construction Of Pipe Conveyor Belt
Dear Filuyang22
Phoneix Germany is one of sole supplier of steel cord belt for pipe conveyor. He is suppling 14.7 km length belt of following specification.
1800mm x ST1800 x 8mm/5mm x FR, width-1800mm,pipe dia-500mm,nos of steel cord is 130(5.4mm dia),hardness- shore A- 65+/- 5, carrying capacity- 1500 Mt/hr coal in carrying side and 600 mt/hr ash in return side.
Rajesh Verma ■
Re: The Construction Of Pipe Conveyor Belt
Dear Rajesh,
Can u please let me know the cost comparison of phoenix viz a viz other global suppliers.
thanks ■
The construction of pipe conveyor belt
Dear all
I need some information about construction of pipe conveyor belt,and thank you very much if you give me the figure of cross section of pipe conveyor belt . ■