Re: Bucket Wheel Reclaimer Gearbox
Hi,
just contact one of the below mentioned bucket wheel drive gearbox manufacturers:
Siemens (former Flender): http://www.flender.com/ or http://www.siemens.com/
Eickhoff: www.eickhoff-bochum.de/
...
Noise analyzis of a BW-drive mostely depends on the type of design (bevel gear has a higher noise level than worm gear...)
Normally you should have 83 +/-2 dB at 1m distance. (theoretically at no-load tests, but on site everything is on a higher sound level... cutting noise, material impacts, chute sealings, bend pulley and than you can't say what comes from the gearbox and what from the other components) ■
Re: Bucket Wheel Reclaimer Gearbox
Try this one as well.
http://www.processonline.com.au/news...-noise-sources ■
Re: Bucket Wheel Reclaimer Gearbox
Thanks for the help guys I'll let you know how I go.
Does anyone have access to a reclaimer gearbox that they can measure for me? ■
Re: Bucket Wheel Reclaimer Gearbox
So far no luck. Any ideas? ■
Re: Bucket Wheel Reclaimer Gearbox
Have got the following dimensions:
3.0m x 1.5m x 1.5m (L x W x H)
Does this sound realistic?
Also, does anyone have an estimation for the rpm of the slowest shaft in the gearbox? ■
Bucket Wheel Reclaimer Gearbox
Hi Guys,
Trying desperately to find the dimensions of a 450kw bucket wheel reclaimer gearbox for a noise analysis.
I need the conformal surface area which is comprised of the height, width and length of reference box.
Help much appreciated. Reference books would also be of great assistance if possible. ■