aluminium nitride nano powder, produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company, possesses small APS, large specific surface area, high surface activity, good injection formation property, high modulus, high dielectric, refractory, good shock and heat-resistance, lower thermal expansion, good compatible with silicon, excellent thermal conductivity. It provides lower sintering temperature and higher strength and ductility from the compaction. It offers excellent resistance to wafer processing gases and plasma erosion.

Thermally conductive aluminium nitride- filled epoxy resin used for electronic packaging, semiconductor devices encapsulated: thermal conductivity and relative permittivity of the AlN particulate-filled epoxy resin are high, and the coefficients of thermal expansion is low. The temperature dependence of the thermal conductivity is deduced from the temperature of the thermal conductivity.

Aluminium nitride used as additives of plastics such as PET, PP, PVI etc., could increases the thermal conductivity and their melting point, featuring high or low temperature resistance and high intensity. We have the dispersion technology and could solve the problems for customers.

Chemical formula: AlN

Purity: 99.0%

[O] < 1%

APS: <50nm

SSA: 75 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: Hexagonal

Color: Off White

CAS No.: 24304-00-5

EINECS Number: 246-140-8

Form: Powder

Solubility in / Miscibility with Water: Decomposes

Hazard class: 4.3, UN2813

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing

[B] ■

Zirconium carbide, produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company, has high purity, small APS, large specific surface area, high surface activity and low loose loading density, anti high temperature, anti-oxidation, high strength, high hardness, good thermal conductivity, toughness. It is an important high temperature structure material with high melting point, high strength and anti-corrosion. It can increase the ability of ablation resistance of carbon fiber. It can absorb more than 99.5% the lower 2 um visible light, reflect the more 2 um visible light and store up energy efficiently. It can be used in specialty fibers, fabrics and textiles.

Purity: 99.0%

[O] < 0.6%

APS: <50 nm

SSA: 70 m2/g

Bulk density: 0.08 g/cm3

Color: Black

Shelf time: 24 months

CAS No.: 12070-14-3

EINECS Number: 235-125-1

Form: Powder

Solubility in / Miscibility with Water: Not determined

Hazard class: UN3178

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing

[B] ■

Titanium carbide nano powder, produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company, possesses high purity, small APS, high surface activity, large specific surface area, anti high temperature, anti-oxidation, high strength, high hardness, excellent thermal conductibility, good toughness, violet high shield larger than 80%, excellent electric conductibility, good chemical inertia to iron and steel etc .

It is an extremely hard refractory ceramic material, it provides higher activity, lower sintering temperature, higher ductile and strength and 80% higher reflection of UV light. It can be used as abrasives, enhancement particle coating, can improve wear resistance, toughness and hardness of hard alloys, bearings alloy, nozzles, cutting tools, tool bits. The resistance to wear, corrosion, and toughness of cutting tools can be increased by adding about 8% of TiC. Tool bits without tungsten content can be made of titanium carbide in nickel-cobalt matrix cermets, enhancing the cutting speed, precision, and smoothness of the piece. This material is used as a heat shield for atmospheric re-entry of space shuttles and similar vehicles. The substance may be also polished and used in scratch-proof watches.

Purity: >% 99.0 min

Crystal Form: Cubic

Color: Black

APS: <30nm, <80nm

CAS No.: 12070-08-5

EINECS Number: 235-120-4

Form: Powder

Solubility in / Miscibility with Water: Insoluble

Hazard class: 4.1, UN3178

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing

[B] ■

We are one of the biggest manufacturers of advanced inorganic materials from China. Our company has eight invention patents related to nano-technology and equipment, and also passed the ISO9001:2000.We focused on producing of nano powder materials, and successfully developed nitride and carbide series of nano-particle ceramic powders, with an annual output more than fifty tons per production line. We have our own R&D division made up of experts who mainly research the application of nanometer materials and help customers solve problems concerning the dispersion, application etc. Our products sell to U.S., Japan, Korea, Hong Kong, West Europe etc.

Products:

SiC, TiC, B4C, ZrC,Si3N4, TiN, AlN, BN, Silicon, Ni, Ag

silicon nitride, silicon carbide, aluminium nitride, titanium nitride, titanium carbide, zirconium carbide, boron carbide, silicon

For applications:

microelectronics, plastic materials, anti-electric erosion, filler, IC packaging materials, clear plastic, polymer materials, rubber materials, wear and corrosion resistance, thermal conductive materials, composites, plating, electrochemical or chemical deposition coating, fuel cell, substrate, lower friction, refractory ceramics, hard coating, transparent materials, nucleating agent, dispersion strengthening, ductile agent, dielectric materials, glass materials; refining agent for alloys or superalloys, high strength steel; powder metallurgy materials, catalyst, surface engineering, surface protection, lubricant oil additive, photoluminescence, IR or UV adsorbing agent, solar energy materials, Photovoltaics, LED materials, Encapsulation material

in the ways of (a) nanofiller or nano additive, (b) nanoparticle coating, (c) condensified nanomaterials with some of combinations above maybe beyond your expectation.

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing ■

High wear resistance additives for coatings including Water-Borne and oil coatings: silicon nitride, silicon carbide.

Silicon carbide, silicon nitride nano powder, produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company, are hard, solid substance. They have high hardness, good shock and heat-resistant characteristics. They possess small APS, large specific surface area, high surface activity, lower sintering temperature, large high temperature strength, high mechanical strength, good chemical stability and corrosion resistance, anti-oxidation and self lubricate, high dielectric constant and resistivity. The violet reflectance is larger than 90%. They are the best additives of coatings, featuring the resulted coating films good properties such as wear aging, anti violet and chemical resistance due to the nanosize ultrafine particles and the interparticle and intraparticle crosslingkings. They can form the dispersive phase in composites. General properties such as improve electric conductivity, absorb wave of composites of nano powders with plastics such as nylon and PET are greatly improved.

Chemical formula: Si3N4 amorphous

Purity: >99.0%

[O] <0.62%

free [Si] <0.2%

APS: 20 nm

SSA: 115 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: amorphous

Color: White

Chemical formula: SiC beta

Purity: 99.0%

[O] <0.6%

free [Si] <0.2%

APS: 40nm

SSA: 60-80 m2/g

Bulk density: 0.08 g/cm3

Crystal cell: Cubic

Color: Green

CAS No.: 409-21-2

EINECS Number: 206-992-8

Form: Powder

Solubility in / Miscibility with Water: Insoluble

Hazard class: No

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing ■

Advanced inorganic nonmetal nano ceramic wear resistance additives of lubricants: silicon nitride, silicon carbide, aluminium nitride

Silicon carbide, silicon nitride and aluminium nitride nano powder are produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company.

They used as additives of lubricants are based on inertia solid materials of silicon carbide, silicon nitride, aluminium nitride, using lubricant as carrier to act on surfaces of work. These additives can be activated to repair the damage position under conditions of high temperature and extreme pressure, at the same time forming the permeating protection film which can insulate the work and reduce the attrition, protect the works.

1, the theory of antiwear additives of inorganic nonmetal nano ceramic is:

The additives can melt to be a system with many kinds of synthesized engine oil, gear oil, lubricating oil or grease, and transfer to the grinding metal surfaces with the movement of machine and permeate firmly to the dent and tiny hole of surfaces to form nanometer protection film which can reduce friction dramatically under conditions of high temperature and extreme pressure.

2, repair abrasion function of inorganic nonmetal nano ceramic:

Tradition lubricating oil and grease only defer the abrasion; Antiwear additives of chemical film have big side effect, great dependent properties, so them can prick up the abrasion of engine consequently.

3, function of inorganic nonmetal nano ceramic

They can reduce and repair abrasion; save fuel by 15-35%; extend the period of oil change; prolong the using life by 2-3 times; reduce the let of exhaust gas and injurant by 20-70%; clear away amassing charcoal, dirty, chemical film and so on.

Chemical formula: Si3N4 amorphous

Purity: >99.0%

[O] <0.62%

free [Si] <0.2%

APS: 20 nm

SSA: 115 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: amorphous

Color: White

Chemical formula: SiC beta

Purity: 99.0%

[O] <0.6%

free [Si] <0.2%

APS: 40nm

SSA: 60-80 m2/g

Bulk density: 0.08 g/cm3

Crystal cell: Cubic

Color: Green

CAS No.: 409-21-2

EINECS Number: 206-992-8

Form: Powder

Solubility in / Miscibility with Water: Insoluble

Hazard class: No

Chemical formula: AlN

Purity: 99.0%

[O] < 1%

APS: <50nm

SSA: 75 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: Hexagonal

Color: Off White

CAS No.: 24304-00-5

EINECS Number: 246-140-8

Form: Powder

Solubility in / Miscibility with Water: Decomposes

Hazard class: 4.3, UN2813

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing ■

High wear resistance additives for coatings including Water-Borne and oil coatings: silicon nitride, silicon carbide.

Silicon carbide, silicon nitride nano powder, produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company, are hard, solid substance. They have high hardness, good shock and heat-resistant characteristics. They possess small APS, large specific surface area, high surface activity, lower sintering temperature, large high temperature strength, high mechanical strength, good chemical stability and corrosion resistance, anti-oxidation and self lubricate, high dielectric constant and resistivity. The violet reflectance is larger than 90%. They are the best additives of coatings, featuring the resulted coating films good properties such as wear aging, anti violet and chemical resistance due to the nanosize ultrafine particles and the interparticle and intraparticle crosslingkings. They can form the dispersive phase in composites. General properties such as improve electric conductivity, absorb wave of composites of nano powders with plastics such as nylon and PET are greatly improved.

Chemical formula: Si3N4 amorphous

Purity: >99.0%

[O] <0.62%

free [Si] <0.2%

APS: 20 nm

SSA: 115 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: amorphous

Color: White

Chemical formula: SiC beta

Purity: 99.0%

[O] <0.6%

free [Si] <0.2%

APS: 40nm

SSA: 60-80 m2/g

Bulk density: 0.08 g/cm3

Crystal cell: Cubic

Color: Green

CAS No.: 409-21-2

EINECS Number: 206-992-8

Form: Powder

Solubility in / Miscibility with Water: Insoluble

Hazard class: No

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing ■

Advanced inorganic nonmetal nano ceramic wear resistance additives of lubricants: silicon nitride, silicon carbide, aluminium nitride

Silicon carbide, silicon nitride and aluminium nitride nano powder are produced by Plasma Arc Vapor Synthesis technology & reactor patented by our company- Hefei Kaier Nano-meter Technology and Development Limited Company.

They used as additives of lubricants are based on inertia solid materials of silicon carbide, silicon nitride, aluminium nitride, using lubricant as carrier to act on surfaces of work. These additives can be activated to repair the damage position under conditions of high temperature and extreme pressure, at the same time forming the permeating protection film which can insulate the work and reduce the attrition, protect the works.

1, the theory of antiwear additives of inorganic nonmetal nano ceramic is:

The additives can melt to be a system with many kinds of synthesized engine oil, gear oil, lubricating oil or grease, and transfer to the grinding metal surfaces with the movement of machine and permeate firmly to the dent and tiny hole of surfaces to form nanometer protection film which can reduce friction dramatically under conditions of high temperature and extreme pressure.

2, repair abrasion function of inorganic nonmetal nano ceramic:

Tradition lubricating oil and grease only defer the abrasion; Antiwear additives of chemical film have big side effect, great dependent properties, so them can prick up the abrasion of engine consequently.

3, function of inorganic nonmetal nano ceramic

They can reduce and repair abrasion; save fuel by 15-35%; extend the period of oil change; prolong the using life by 2-3 times; reduce the let of exhaust gas and injurant by 20-70%; clear away amassing charcoal, dirty, chemical film and so on.

Chemical formula: Si3N4 amorphous

Purity: >99.0%

[O] <0.62%

free [Si] <0.2%

APS: 20 nm

SSA: 115 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: amorphous

Color: White

Chemical formula: SiC beta

Purity: 99.0%

[O] <0.6%

free [Si] <0.2%

APS: 40nm

SSA: 60-80 m2/g

Bulk density: 0.08 g/cm3

Crystal cell: Cubic

Color: Green

CAS No.: 409-21-2

EINECS Number: 206-992-8

Form: Powder

Solubility in / Miscibility with Water: Insoluble

Hazard class: No

Chemical formula: AlN

Purity: 99.0%

[O] < 1%

APS: <50nm

SSA: 75 m2/g

Bulk density: 0.05 g/cm3

Crystal cell: Hexagonal

Color: Off White

CAS No.: 24304-00-5

EINECS Number: 246-140-8

Form: Powder

Solubility in / Miscibility with Water: Decomposes

Hazard class: 4.3, UN2813

Hefei Kaier Nano Tech & Development Co., Ltd.

NO.17 Tianhu Road, Hefei, Anhui 230088 , P. R. China

Tel:86-551-5314886 ext. 8012

Fax:86-551-5315779

Email: erin.hsing@yahoo.com

http://www.nanopaprika.eu/profile/erinhsing ■