Re: Conveyor Belt Vulcanizer Supplier In China
Dear Sirs,
Can you please sent us by email your complete brochure from the vulcanizing presses, including all the technical data ?
We thank you kindly in advance.
With best regards,
ICE-Trade s.a.
Willem Pouwels.
ICE-Trade s.a.
International Conveyor Equipment & Trading
Passage de la Poste 3-2
B-7700 Mouscron, Belgium
Tel. +32.56.48 18 80
Fax +32.56.48 18 88
Mob +32.473 618 671
Skype Willem Pouwels
willem.pouwels@ice-trade.com
www.ice-trade.com ****
This e.mail contains proprietary information and may be confidential. If you are not the intended recipient of this e.mail,
you are herby notified that any dissemination, distribution or copying of this message is stricktly prohibited. If you received
this message in error, please delete it immediately and notify the sender. ■
Plc Conveyor Belt Vulcanizer
PLC CONVEYOR BELT VULCANIZER
TECHNICAL PARAMETER,
1. Vulcanization pressure: 1.0-2.0Mpa;
2. Vulcanization temperature: 145 ;
3. Difference in surface temperature of vulcanized plate: ± 5 ;
4. Calefactive time (at normal temperature to 145 ): ≤30 mins;
5. Power supply voltage: 220V to 660 v; 50/60 Hz; 3Ph;
6. Output power of Electronic Control Box: 36 KW;
7. Temperature adjustment range: 0 to 200 ;
8. Timing adjustment range: 0 to 99 min;
9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm.
E-MAIL: SHIYIKEVIN@HOTMAIL.COM
CG@JSCGZZ.COM ■
Conveyor Belt Vulcanizer Supplier in China
We are Jiangsu Chenggong Machinery Manufacturing Co., Ltd, specialized in manufacturing Conveyor Belt Vulcanizers.
Introduction
CGLHJ series of Electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 1.5 Mpa) of water supply system. It ¡s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt.
Purposes
The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
Technical parameters
1. Vulcanization pressure: 1.0-2.0mpa;
2. vulcanization temperature: 145 ;
3. Difference in surface temperature of vulcanized plate: ¡ 5 ¡æ;
4. Calefactive time (at normal temperature to 145 ) :¨30 min;
5. Power supply voltage: 380 v/660V. 50Hz/60Hz;
6. Output power of Electronic Control Box: 36 Kw;
7. Temperature adjustment range: 0 to 200 ;
8. Timing adjustment range: 0 to 99 min;
9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm
Welcome to contact us!
Company Website: www.jscgzz.com
E-mail: cg@jscgzz.com
TEL: +86-510-86950-888
FAX:+86-510-86950-183
Messager: shiyikevin@hotmail.com
Attachments
conveyor belt vulcanizer (JPG)
■