Design-Calculations-For-Pneumatic-C
Dear Mr. Amrit T. Agarwal,
I am working on Pneumatic Conveying design for fly ash, if you do not mind can you send a copy of your article ?
Thanks in advance
Best regards,
Danu ■
Design-Calculations-For-Pneumatic-C
Dear Mr. Amrit T. Agarwal,
I am working on Pneumatic Conveying design for fly ash, if you do not mind can you send a copy of your article ?
Thanks in advance
Best regards,
Danu ■
Design-Calculations-For-Pneumatic-C
Dear Mr. Amrit T. Agarwal,
I am working on Pneumatic Conveying design for fly ash, if you do not mind can you send a copy of your articles with calculation program?
To my email : danu7286@gmail.com
Thanks in advance
Best regards,
Danu Permana ■
Design-Calculations-For-Pneumatic-C
Dear Mr. Amrit T. Agarwal,
I am working on Pneumatic Conveying design for fly ash, if you do not mind can you send a copy of your articles with calculation program?
To my email : danu7286@gmail.com
Thanks in advance
Best regards,
Danu Permana ■
Re: Design Calculations For Pneumatic Conveying
I am working on Pneumatic Conveying design for fly ash, if you do not mind can you send a copy of your articles with calculation program?
To my email : danu7286@gmail.com
Thanks in advance
Best regards,
Danu Permana
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Danu,
Please send your request for this article to my email address given below. Thank you.
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
I am working on Pneumatic Conveying design for fly ash, if you do not mind can you send a copy of your articles with calculation program?
To my email : danu7286@gmail.com
Thanks in advance
Best regards,
Danu Permana
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Danu,
Please send your request for this article to my email address given below. Thank you.
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Dear Mr. Amrit T. Agarwal,
can you send me your articles?
1) “MOVING AIR IN PNEUMATIC CONVEYING SYSTEMS”. (For the design, sizing, and selection of blowers and fans).
2) “ROTARY VALVES IN PNEUMATIC CONVEYING SYSTEMS”. (For the design, sizing, selection, and installation of rotary valves).
3) “RULES OF THUMB FOR PNEUMATIC CONVEYING PIPE LINES”. (For the design, selection, and installation of pneumatic conveying pipelines).
4) “DESIGN GUIDE FOR DUST COLLECTORS”. (For the design, sizing, selection, and operation of dust collectors).
5) “INSTRUMENTATION AND CONTROL SYSTEMS IN PNEUMATIC CONVEYING”. (For the design of instrumentation and control systems for pneumatic conveying systems).
6) “DUST EXPLOSIONS: PREVENTION AND PROTECTION”. (For the design dust explosion prevention and protection methods and how to design them).
7) “Theory and Design of Dilute Phase Pneumatic Conveying Systems”.
Thank you in advance.
Best regards,
Aleksandar Kosti.
aleksandar.r.kostic@gmail.com ■
Re: Design Calculations For Pneumatic Conveying
Dear Mr. Amrit T. Agarwal,
can you send me your articles?
1) “MOVING AIR IN PNEUMATIC CONVEYING SYSTEMS”. (For the design, sizing, and selection of blowers and fans).
2) “ROTARY VALVES IN PNEUMATIC CONVEYING SYSTEMS”. (For the design, sizing, selection, and installation of rotary valves).
3) “RULES OF THUMB FOR PNEUMATIC CONVEYING PIPE LINES”. (For the design, selection, and installation of pneumatic conveying pipelines).
4) “DESIGN GUIDE FOR DUST COLLECTORS”. (For the design, sizing, selection, and operation of dust collectors).
5) “INSTRUMENTATION AND CONTROL SYSTEMS IN PNEUMATIC CONVEYING”. (For the design of instrumentation and control systems for pneumatic conveying systems).
6) “DUST EXPLOSIONS: PREVENTION AND PROTECTION”. (For the design dust explosion prevention and protection methods and how to design them).
7) “Theory and Design of Dilute Phase Pneumatic Conveying Systems”.
Thank you in advance.
Best regards,
Aleksandar Kosti.
aleksandar.r.kostic@gmail.com ■
Design-Calculations-For-Pneumatic-Conveying
Dear Mr. Amrit,
Sir i am keen to know the excel based calculation on the following topics. It will be great if you please help me out in these topics.
1."MOVING AIR IN PNEUMATIC CONVEYING SYSTEMS".
2. "Theory and Design of Dilute Phase Pneumatic Conveying Systems
With high regards,
SUMEET MAHAJAN
VASUDEVA MANUFACTURERS & ENGINEERS PVT. LTD
201-202, VARDHMAN PRASAD PLAZA,
PLOT NO. 1, POCKET -6, SECTOR -12,
DWARKA, NEW DELHI -110075
Mob No.: 09650004886
E-mail add: sumeet@vasudevaengg.com ■
Design-Calculations-For-Pneumatic-Conveying
Dear Mr. Amrit,
Sir i am keen to know the excel based calculation on the following topics. It will be great if you please help me out in these topics.
1."MOVING AIR IN PNEUMATIC CONVEYING SYSTEMS".
2. "Theory and Design of Dilute Phase Pneumatic Conveying Systems
With high regards,
SUMEET MAHAJAN
VASUDEVA MANUFACTURERS & ENGINEERS PVT. LTD
201-202, VARDHMAN PRASAD PLAZA,
PLOT NO. 1, POCKET -6, SECTOR -12,
DWARKA, NEW DELHI -110075
Mob No.: 09650004886
E-mail add: sumeet@vasudevaengg.com ■
Article On Pneumatic Conveying
Dear Mr. Agarwal,
Can you please send the copy of the article to me at prashant.wani.11@gmail.com.
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
■
Article On Pneumatic Conveying
Dear Mr. Agarwal,
Can you please send the copy of the article to me at prashant.wani.11@gmail.com.
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
■
Re: Design Calculations For Pneumatic Conveying
Dear Mr. Amrit
Could you send me a copy of this article?
My e-mail is acagliyan@alapala.com
Thank you / Best Regards ■
Re: Design Calculations For Pneumatic Conveying
Dear Mr. Amrit
Could you send me a copy of this article?
My e-mail is acagliyan@alapala.com
Thank you / Best Regards ■
Re: Design Calculations For Pneumatic Conveying
Could you send me a copy of this article?
My e-mail is acagliyan@alapala.com
Thank you / Best Regards
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Please send your request for this article to my email address given below:
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Could you send me a copy of this article?
My e-mail is acagliyan@alapala.com
Thank you / Best Regards
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Please send your request for this article to my email address given below:
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Dear Amrit Sir,
Request you to send me a copy of your Article. Email - abhaysangode@gmail.com
Abhay.
Plot 161 Rahul Nagar,
(Nagpur-Maharashtra) India.
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
■
Re: Design Calculations For Pneumatic Conveying
Dear Amrit Sir,
Request you to send me a copy of your Article. Email - abhaysangode@gmail.com
Abhay.
Plot 161 Rahul Nagar,
(Nagpur-Maharashtra) India.
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
■
Re: Design Calculations For Pneumatic Conveying
Dear Amrit Sir,
Request you to send me a copy of your Article. Email - abhaysangode@gmail.com
Abhay.
Plot 161 Rahul Nagar,
(Nagpur-Maharashtra) India
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Abhay,
A copy of my article on the Design of Pneumatic Conveying Systems is being sent to you. Please contact me if you have any questions or comments, or need further help.
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Dear Amrit Sir,
Request you to send me a copy of your Article. Email - abhaysangode@gmail.com
Abhay.
Plot 161 Rahul Nagar,
(Nagpur-Maharashtra) India
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Abhay,
A copy of my article on the Design of Pneumatic Conveying Systems is being sent to you. Please contact me if you have any questions or comments, or need further help.
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Mr Agarwal ,
Please send me a copy of your article regarding design calculations for pneumatic conveying tp simon.mallett@saint-gobain.com
Regards
Simon ■
Re: Design Calculations For Pneumatic Conveying
Mr Agarwal ,
Please send me a copy of your article regarding design calculations for pneumatic conveying tp simon.mallett@saint-gobain.com
Regards
Simon ■
Re: Design Calculations For Pneumatic Conveying
Please send me a copy of your article regarding design calculations for pneumatic conveying tp simon.mallett@saint-gobain.com
Regards
Simon
====================================================================================================
Dear Simon,
I will be glad to send a copy of my article to you. Please send your request to me by email:
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Please send me a copy of your article regarding design calculations for pneumatic conveying tp simon.mallett@saint-gobain.com
Regards
Simon
====================================================================================================
Dear Simon,
I will be glad to send a copy of my article to you. Please send your request to me by email:
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Conveying With Air
Dear Mr. Amrit ;
I plan to move raw metarial with pneumatic conveying ,
I should choose the equipments such as screew pomp,compressor , pipe exc.,
but I need some help !
f I send to you my drawing , can you specify requirements of design ?
thank you so much for your help.
Levent ULUÇAY ■
Conveying With Air
Dear Mr. Amrit ;
I plan to move raw metarial with pneumatic conveying ,
I should choose the equipments such as screew pomp,compressor , pipe exc.,
but I need some help !
f I send to you my drawing , can you specify requirements of design ?
thank you so much for your help.
Levent ULUÇAY ■
Re: Design Calculations For Pneumatic Conveying
Good Day Amrit Agarwal,
I would be most grateful if you could pass me a pdf of your article, I will PM you my contact e-mail.
Kind regards
Joby
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
■
Re: Design Calculations For Pneumatic Conveying
Good Day Amrit Agarwal,
I would be most grateful if you could pass me a pdf of your article, I will PM you my contact e-mail.
Kind regards
Joby
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
■
Re: Design Calculations For Pneumatic Conveying
Dear Joby,
A copy of my article on Design Calculations for Pneumatic Conveying Systems has been mailed to you. This article should help you in the design of your conveying system. But my recommendation is that you get your calculations reviewed by an expert before you construct the conveying system.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting ■
Re: Design Calculations For Pneumatic Conveying
Dear Joby,
A copy of my article on Design Calculations for Pneumatic Conveying Systems has been mailed to you. This article should help you in the design of your conveying system. But my recommendation is that you get your calculations reviewed by an expert before you construct the conveying system.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting ■
Dear Sir,
It is very glad if you can send me your article.
Best wishes,
Andy Nguyen
my email: binh.mce@gmail.com ■
Dear Sir,
It is very glad if you can send me your article.
Best wishes,
Andy Nguyen
my email: binh.mce@gmail.com ■
Re: Design Calculations For Pneumatic Conveying
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Andy,
A copy of my article on DESIGN CALCULATIONS FOR PNEUMATIC CONVEYING is being sent to you. Please contact me for any questions or comments. Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Andy,
A copy of my article on DESIGN CALCULATIONS FOR PNEUMATIC CONVEYING is being sent to you. Please contact me for any questions or comments. Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
dear amrit
thanks for the article, I found it a practical, hands on approach and I am now trying to compose my own calculation sheet. but i have one problem, i need the SI unit equation for my report, but i can't find the solution, can you send me the SI unit equation of your article? just the equation please. thanks for your generosity.
my email : glennnierwan@gmail.com
glenn. ■
Re: Design Calculations For Pneumatic Conveying
dear amrit
thanks for the article, I found it a practical, hands on approach and I am now trying to compose my own calculation sheet. but i have one problem, i need the SI unit equation for my report, but i can't find the solution, can you send me the SI unit equation of your article? just the equation please. thanks for your generosity.
my email : glennnierwan@gmail.com
glenn. ■
Please Send Pdf Of Excel Sheet And Publication
Dear Sir,
Please send both files if it is not too much trouble.
In return we offer you our software for calculation of mechanical conveyors.
kind regards,
Jur Lommerts
Jansen & Heuning
www.jh.nl ■
Please Send Pdf Of Excel Sheet And Publication
Dear Sir,
Please send both files if it is not too much trouble.
In return we offer you our software for calculation of mechanical conveyors.
kind regards,
Jur Lommerts
Jansen & Heuning
www.jh.nl ■
Re: Design Calculations For Pneumatic Conveying
Please send both files if it is not too much trouble.
In return we offer you our software for calculation of mechanical conveyors.
kind regards,
Jur Lommerts
Jansen & Heuning
www.jh.nl
=================================================================
Dear Mr. Lommerts,
I will be glad to send to you a copy of my article on the Design Calculations for Dilute Phase Pneumatic Conveying Systems, except for my excel work book.
Let me know if you would like to receive a copy of my article.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Please send both files if it is not too much trouble.
In return we offer you our software for calculation of mechanical conveyors.
kind regards,
Jur Lommerts
Jansen & Heuning
www.jh.nl
=================================================================
Dear Mr. Lommerts,
I will be glad to send to you a copy of my article on the Design Calculations for Dilute Phase Pneumatic Conveying Systems, except for my excel work book.
Let me know if you would like to receive a copy of my article.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
Dear Amrit
Could you send me a copy of this article, also a copy of exel equations?
My e-mail is osamabadr555@gmail.com ■
Re: Design Calculations For Pneumatic Conveying
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
Dear Amrit
Could you send me a copy of this article, also a copy of exel equations?
My e-mail is osamabadr555@gmail.com ■
Pneumatic Conveying
Please send me the article.
Thank you very much in advance.
We are about to receive an order for pneumatic conveying and might be asking you to assist us.
Do you work on hourly basis?
kind regards,
Jur Lommerts
Jansen&Heuning
------------------------
Dear Mr. Lommerts,
I will be glad to send to you a copy of my article on the Design Calculations for Dilute Phase Pneumatic Conveying Systems, except for my excel work book.
Let me know if you would like to receive a copy of my article.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com[/QUOTE] ■
Pneumatic Conveying
Please send me the article.
Thank you very much in advance.
We are about to receive an order for pneumatic conveying and might be asking you to assist us.
Do you work on hourly basis?
kind regards,
Jur Lommerts
Jansen&Heuning
------------------------
Dear Mr. Lommerts,
I will be glad to send to you a copy of my article on the Design Calculations for Dilute Phase Pneumatic Conveying Systems, except for my excel work book.
Let me know if you would like to receive a copy of my article.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com[/QUOTE] ■
My Article: Theory And Design Of Pneumatic Conveying Systems
Lommerts;87184]Please send me the article.
Thank you very much in advance.
We are about to receive an order for pneumatic conveying and might be asking you to assist us.
Do you work on hourly basis?
kind regards,
Jur Lommerts
Jansen&Heuning
------------------------
Dear Mr. Lommerts,
I will be glad to send to you a copy of my article: "Theory and Design Calculations for Dilute Phase Pneumatic Conveying Systems"
Please send your request to my email address given below.
Regards.
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com[/QUOTE][/QUOTE] ■
My Article: Theory And Design Of Pneumatic Conveying Systems
Lommerts;87184]Please send me the article.
Thank you very much in advance.
We are about to receive an order for pneumatic conveying and might be asking you to assist us.
Do you work on hourly basis?
kind regards,
Jur Lommerts
Jansen&Heuning
------------------------
Dear Mr. Lommerts,
I will be glad to send to you a copy of my article: "Theory and Design Calculations for Dilute Phase Pneumatic Conveying Systems"
Please send your request to my email address given below.
Regards.
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com[/QUOTE][/QUOTE] ■
Re: Design Calculations For Pneumatic Conveying
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
Professor, I would like to ask for the excel file.
Please send it to my email: nmn.melbien.gacayan@gmail.com
Thank you ■
Re: Design Calculations For Pneumatic Conveying
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
Professor, I would like to ask for the excel file.
Please send it to my email: nmn.melbien.gacayan@gmail.com
Thank you ■
Re: Design Calculations For Pneumatic Conveying
Please send it to my email: nmn.melbien.gacayan@gmail.com
Thank you
Dear Garrison,
I am sending my article on the design of pneumatic conveying systems. I assume you know Excel. It is easy to develop your own excel file using this article.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Design Calculations For Pneumatic Conveying
Please send it to my email: nmn.melbien.gacayan@gmail.com
Thank you
Dear Garrison,
I am sending my article on the design of pneumatic conveying systems. I assume you know Excel. It is easy to develop your own excel file using this article.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Design Calculations for Pneumatic Conveying
My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in
href="https://who.bulk-online.com/profile/2-reinhard-h-wohlbier.html" target="blank">Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.
Regards,
Amrit T. Agarwal
Consulting Engineer
Pneumatic Conveying Consulting Services
Email:
href="mailto:polypcc@aol.com">polypcc@aol.com
Ph and Fax: 304 346 5125
Picture added by Adinistrator as an example:
href="https://forum.bulk-online.com/attachment.php?attachmentid=42181&d=1415730847" id="attachment42181" rel="Lightbox14426" target="blank">
■