I would like to express my gratitude to Mr.Agarwal for the article. It has helped in my understanding of the calculation also it is easy to use.It has helped me immensely

Regards

Narayan I ■

I would like to express my gratitude to Mr.Agarwal for the article. It has helped in my understanding of the calculation also it is easy to use.It has helped me immensely

Regards

Narayan I ■

Dear Mr Agarwal sir,Could you send me a copy of your article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" published in Powder Handling and Processing magazine?Thanks in advanceplease mail mecmraju, AP.battucmraju@yahoo.com ■

Dear Mr Agarwal sir,Could you send me a copy of your article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" published in Powder Handling and Processing magazine?Thanks in advanceplease mail mecmraju, AP.battucmraju@yahoo.com ■

I have used the calculations for dilute phase pneumatic conveying, based on the article written by Amrit T. Agarwal, which was published in the Powder Handling and Processing magazine, and I have found them very useful and accurate to understand the conveying process.

Regards,

Carlos Guerrero

Quito, Ecuador ■

I have used the calculations for dilute phase pneumatic conveying, based on the article written by Amrit T. Agarwal, which was published in the Powder Handling and Processing magazine, and I have found them very useful and accurate to understand the conveying process.

Regards,

Carlos Guerrero

Quito, Ecuador ■

Thank you Mr. Agarwal. Your article "Theory and Design of Dilute Phase

Pneumatic Conveying Systems" helped me to establish a spreadsheet to run calculations on pneumatic conveying lines. It was easy to understand and very user friendly.

Regards,

Michael Venn ■

Thank you Mr. Agarwal. Your article "Theory and Design of Dilute Phase

Pneumatic Conveying Systems" helped me to establish a spreadsheet to run calculations on pneumatic conveying lines. It was easy to understand and very user friendly.

Regards,

Michael Venn ■

Hello

I read the article ' Theory and Design of Dilute phase pneumatics conveying system' and found more knowledge about the system. As i don't have so much experience in the same so its difficult to me to understand all terms, so continously i spend the time on the same and try to learnt lot from the article.

Thanx to Mr.Amit.

Rupesh ■

Hello

I read the article ' Theory and Design of Dilute phase pneumatics conveying system' and found more knowledge about the system. As i don't have so much experience in the same so its difficult to me to understand all terms, so continously i spend the time on the same and try to learnt lot from the article.

Thanx to Mr.Amit.

Rupesh ■

Dear Amit,

Can you please send me a copy .

I am doing my PhD at IIT Kharagpur , amd I hope this will help me much.

Thanks and regards

P.Patro

email: ppatro123@yahoo.com ■

Dear Amit,

Can you please send me a copy .

I am doing my PhD at IIT Kharagpur , amd I hope this will help me much.

Thanks and regards

P.Patro

email: ppatro123@yahoo.com ■

Thanks Amrit for the paper of pneumatic conveying calculation , the basic thory for calculation is described in detail , it is good to check the calculation result that made by using table and diagram from best practice experience. Best regards, Johan S ■

Thanks Amrit for the paper of pneumatic conveying calculation , the basic thory for calculation is described in detail , it is good to check the calculation result that made by using table and diagram from best practice experience. Best regards, Johan S ■

I finally manage to post my reply to thank you for sending me your paper. It is useful, nicely written and reports hard-to-find information on seminal research work from the '70s (we are all standing on the shoulders of giants). I guess I will use it for lecturing, however for that purpose it would be useful to have some sample values for K (e.g. the author refers to some data bank...which ones?) and some reference on how to select R values, due to academic shortage of real experimental values . ■

I finally manage to post my reply to thank you for sending me your paper. It is useful, nicely written and reports hard-to-find information on seminal research work from the '70s (we are all standing on the shoulders of giants). I guess I will use it for lecturing, however for that purpose it would be useful to have some sample values for K (e.g. the author refers to some data bank...which ones?) and some reference on how to select R values, due to academic shortage of real experimental values . ■

Dear Amrit Agarwal,

Good day!

I am researching on Pneumatic conveying Design of Flyash and Cement and find a lead to your article that could be useful for my design calculation and checking using excel.

It would be much appreciated if you can sent the article

"Theory and Design of Dilute Phase Pneumatic Conveying Systems"

to me for my research.

Thanks in advance. My email is

michaelw@gich.com.hk

Michael Wong

for

Green Island ■

Dear Amrit Agarwal,

Good day!

I am researching on Pneumatic conveying Design of Flyash and Cement and find a lead to your article that could be useful for my design calculation and checking using excel.

It would be much appreciated if you can sent the article

"Theory and Design of Dilute Phase Pneumatic Conveying Systems"

to me for my research.

Thanks in advance. My email is

michaelw@gich.com.hk

Michael Wong

for

Green Island ■

Dear Amrit Agarwal,

I’ve been trying to locate information regarding design of Dust Collectors and your article “Design Guide for Dust Collectors” continues to pop up, however I have had no luck in finding a copy. I was wondering if I could request a copy of this article plus some others I have seen reference to?

A copy of the below articles would be hugely appreciated:

•"Design Guide for Dust Collectors"

•"Product Quality in Pneumatic Conveying”

•"Theory and Design of Dilute Phase Pneumatic Conveying Systems"

•"Improving Rotary Valve Performance"

Kind regards,

Campbell Childs

Mechanical Engineer

campbell.childs@consonic.com

8 Jarrah Drive

Braeside 3195

Victoria

Ph +61 03 9580 6211

Mobile 0423 565 673

www.consonic.com ■

Dear Amrit Agarwal,

I’ve been trying to locate information regarding design of Dust Collectors and your article “Design Guide for Dust Collectors” continues to pop up, however I have had no luck in finding a copy. I was wondering if I could request a copy of this article plus some others I have seen reference to?

A copy of the below articles would be hugely appreciated:

•"Design Guide for Dust Collectors"

•"Product Quality in Pneumatic Conveying”

•"Theory and Design of Dilute Phase Pneumatic Conveying Systems"

•"Improving Rotary Valve Performance"

Kind regards,

Campbell Childs

Mechanical Engineer

campbell.childs@consonic.com

8 Jarrah Drive

Braeside 3195

Victoria

Ph +61 03 9580 6211

Mobile 0423 565 673

www.consonic.com ■

pneumatic conveying calculation program

Dear Amrit

could you send pneumatic conveying calculation program

My Mail adress yusufbakir10@hotmail.com

Thanksss ■

pneumatic conveying calculation program

Dear Amrit

could you send pneumatic conveying calculation program

My Mail adress yusufbakir10@hotmail.com

Thanksss ■

Dear Amrit

May I also request a copy of your article?

"... If you know basic Excel, you can use my calculation method publised in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

My e-mail is ales.prochazka@vsb.cz

Thanks in advance

Svata ■

Dear Amrit

May I also request a copy of your article?

"... If you know basic Excel, you can use my calculation method publised in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

My e-mail is ales.prochazka@vsb.cz

Thanks in advance

Svata ■

Dear Amrit,

Thanks for the article.

It really helps me to check my calucaltion and I find the extra information is avaliable to further tweak my method for a more precise than a ball park one.

Anyway it is good reference.

Michael

Green Island

Originally Posted by michaelwong

Dear Amrit Agarwal,

Good day!

I am researching on Pneumatic conveying Design of Flyash and Cement and find a lead to your article that could be useful for my design calculation and checking using excel.

It would be much appreciated if you can sent the article

"Theory and Design of Dilute Phase Pneumatic Conveying Systems"

to me for my research.

Thanks in advance. My email is

michaelw@gich.com.hk

Michael Wong

for

Green Island

■

Dear Amrit,

Thanks for the article.

It really helps me to check my calucaltion and I find the extra information is avaliable to further tweak my method for a more precise than a ball park one.

Anyway it is good reference.

Michael

Green Island

Originally Posted by michaelwong

Dear Amrit Agarwal,

Good day!

I am researching on Pneumatic conveying Design of Flyash and Cement and find a lead to your article that could be useful for my design calculation and checking using excel.

It would be much appreciated if you can sent the article

"Theory and Design of Dilute Phase Pneumatic Conveying Systems"

to me for my research.

Thanks in advance. My email is

michaelw@gich.com.hk

Michael Wong

for

Green Island

■

System Design Calculations for Pneumatic Conveying

Dear Mr. Agarwal,

I would be interested in obtaining a copy of your calculation method? It would help out alot for my project.

Thanks!

Erdoganlar Mak.

Turkey/Balikesir

Thankss..

email adresss: erdoganlarmakine@gmail.com, info@erdoganlarmakine.net ■

System Design Calculations for Pneumatic Conveying

Dear Mr. Agarwal,

I would be interested in obtaining a copy of your calculation method? It would help out alot for my project.

Thanks!

Erdoganlar Mak.

Turkey/Balikesir

Thankss..

email adresss: erdoganlarmakine@gmail.com, info@erdoganlarmakine.net ■

Originally Posted by Svata

Dear Amrit

May I also request a copy of your article?

"... If you know basic Excel, you can use my calculation method publised in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

My e-mail is ales.prochazka@vsb.cz

Thanks in advance

Svata

thank you

Thank you Mr. Agarwal for sending me the article on "theory and design of dilute phase pneumatic conveying systems". I found it a practical, hands on approach and I am now trying to compose my own calculation sheet. Since I am European, I have one problem: the use of non-SI units, but I'll get by that !

I can definitely recommend the article! ■

Originally Posted by Svata

Dear Amrit

May I also request a copy of your article?

"... If you know basic Excel, you can use my calculation method publised in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

My e-mail is ales.prochazka@vsb.cz

Thanks in advance

Svata

thank you

Thank you Mr. Agarwal for sending me the article on "theory and design of dilute phase pneumatic conveying systems". I found it a practical, hands on approach and I am now trying to compose my own calculation sheet. Since I am European, I have one problem: the use of non-SI units, but I'll get by that !

I can definitely recommend the article! ■

thank you

Thank you Mr. Agarwal for sending me the article on "theory and design of dilute phase pneumatic conveying systems". I found it a practical, hands on approach and I am now trying to compose my own calculation sheet. Since I am European, I have one problem: the use of non-SI units, but I'll get by that !

I can definitely recommend the article! ■

thank you

Thank you Mr. Agarwal for sending me the article on "theory and design of dilute phase pneumatic conveying systems". I found it a practical, hands on approach and I am now trying to compose my own calculation sheet. Since I am European, I have one problem: the use of non-SI units, but I'll get by that !

I can definitely recommend the article! ■

Could you please forward me a copy of this article?

“If you know basic Excel, you can use my calculation method publised in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

Regards ■

Could you please forward me a copy of this article?

“If you know basic Excel, you can use my calculation method publised in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

Regards ■

Mr. Agarwal,

I would like to request a copy of your article "theory and design of dilute phase pneumatic conveying systems" as I beleive it would help with a class project.

email: c.eberts@usask.ca

Thank you very much! ■

Mr. Agarwal,

I would like to request a copy of your article "theory and design of dilute phase pneumatic conveying systems" as I beleive it would help with a class project.

email: c.eberts@usask.ca

Thank you very much! ■

Dear Mr. Amrit agarwal

May I have copy of your System Design Calculations for Pneumatic Conveying and pneumatic conveying calculation program

Thank you very much in advance

Yamaç TMÜREL ■

Dear Mr. Amrit agarwal

May I have copy of your System Design Calculations for Pneumatic Conveying and pneumatic conveying calculation program

Thank you very much in advance

Yamaç TMÜREL ■

Dear Mr.Amrit Agarwal,

Thanks for sending me an article on "Calculations for Pneumatic Conveying".This article is very informative and gives an easy to use designing method of pneumatic conveying systems or for improving the performance of existing conveying systems on plant scale.

With kind regards,

Yamac Timurel ■

Dear Mr.Amrit Agarwal,

Thanks for sending me an article on "Calculations for Pneumatic Conveying".This article is very informative and gives an easy to use designing method of pneumatic conveying systems or for improving the performance of existing conveying systems on plant scale.

With kind regards,

Yamac Timurel ■

[QUOTE=Amrit Agarwal;14426]My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.

Thanks for sending me the article on "Calculations for Pneumatic Conveying".This article help me easy to design the conveying systems for cement transport! ■

[QUOTE=Amrit Agarwal;14426]My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.

Thanks for sending me the article on "Calculations for Pneumatic Conveying".This article help me easy to design the conveying systems for cement transport! ■

Dear Mr. Amrit Agarwal,

Could you send me a copy of your article "Theory and Design of Dilute Phase Pneumatic Conveying Systems"?

My e-mail is carolina.patalano@fluor.com

Thanks very much in advanced,

Best regards,

Carolina Patalano| FLUOR |Process Eng. Dept. | Ciudad Autnoma de Buenos Aires – Repblica Argentina | www.fluor.com** ■

Dear Mr. Amrit Agarwal,

Could you send me a copy of your article "Theory and Design of Dilute Phase Pneumatic Conveying Systems"?

My e-mail is carolina.patalano@fluor.com

Thanks very much in advanced,

Best regards,

Carolina Patalano| FLUOR |Process Eng. Dept. | Ciudad Autnoma de Buenos Aires – Repblica Argentina | www.fluor.com** ■

Originally Posted by Amrit Agarwal

My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.

Regards,

Amrit T. Agarwal

Consulting Engineer

Pneumatic Conveying Consulting Services

Email: polypcc@aol.com

Ph and Fax: 304 346 5125

The article is a very helpful guide to understand the various parameters to be considered while designing a dilute phase conveying system.It clearly put forward the various equations involved. I could create an excel sheet for calculations with ease.

Thank you,

Vandana ■

Originally Posted by Amrit Agarwal

My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.

Regards,

Amrit T. Agarwal

Consulting Engineer

Pneumatic Conveying Consulting Services

Email: polypcc@aol.com

Ph and Fax: 304 346 5125

The article is a very helpful guide to understand the various parameters to be considered while designing a dilute phase conveying system.It clearly put forward the various equations involved. I could create an excel sheet for calculations with ease.

Thank you,

Vandana ■