HERBOLD Meckesheim GmbH will present their product range at the international Plastics Recycling Trade Show FAKUMA (Neue Messe 1, 88046 Friedrichshafen, Stand in Hall A6-6502) from October 16 to October 20, 2012.
Tailor-styled recycling solutions for plastic waste – in this area HERBOLD Meckesheim GmbH is an experienced full-line provider of recycling technology: not only the full range of recycling technology from coarse shredders via granulators to pulverisers, but also complete solutions for the washing and separation of contaminated mixed plastic waste make up the product range of the Meckesheim/Germany-based machine manufacturer.
As part of the vast product range HERBOLD Meckesheim will showcase the following typical machine series:
-The Plastcompactor HV 50 for compacting films, fibres and foams: this machine can transform flow-resistant materials into an agglomerate with high bulk density and good flow characteristics. Typical materials are PA-fibres, PET-flakes and scrap XPS-foams.
Fig. 1:
Herbold Plastkompactor
Fig. 1a:
Agglomerate
-The Shredder HR 62P is rounding off the product range of shredders with a small compact shredder that might be interesting for in-house plastics processing companies with only small quantities of lumps. Due to its low acquisition costs and its compact design, this machine makes an in-house recycling possible for blow moulding, film and injection moulding shops.
Fig. 2:
Herbold Shredder of the HR 62 P series
-The Granulator SML 45/60 SB with forced feeding (patent pending): this special granulator design can considerably reduce its energy demand – with a 30 to 50 % lower connected load compared to a traditional machine. Pre-shredded waste and hollow bodies can be recycled in a very economic way. Some 200 machines of this design have already been sold since the market launch.
Fig. 3:
Herbold Granulator SB series
In dialogue with the customer, HERBOLD Meckesheim will find the optimum solution for customer’s recycling problem. Tests can be made in Herbold’s technical centre where all the machines are available in production scale size for tests with customer’s original material.
HERBOLD at FAKUMA 2012
HERBOLD Meckesheim at FAKUMA 2012
HERBOLD Meckesheim GmbH will present their product range at the international Plastics Recycling Trade Show FAKUMA (Neue Messe 1, 88046 Friedrichshafen, Stand in Hall A6-6502) from October 16 to October 20, 2012.
Tailor-styled recycling solutions for plastic waste – in this area HERBOLD Meckesheim GmbH is an experienced full-line provider of recycling technology: not only the full range of recycling technology from coarse shredders via granulators to pulverisers, but also complete solutions for the washing and separation of contaminated mixed plastic waste make up the product range of the Meckesheim/Germany-based machine manufacturer.
As part of the vast product range HERBOLD Meckesheim will showcase the following typical machine series:
-The Plastcompactor HV 50 for compacting films, fibres and foams: this machine can transform flow-resistant materials into an agglomerate with high bulk density and good flow characteristics. Typical materials are PA-fibres, PET-flakes and scrap XPS-foams.
Fig. 1:
Herbold Plastkompactor
Fig. 1a:
Agglomerate
-The Shredder HR 62P is rounding off the product range of shredders with a small compact shredder that might be interesting for in-house plastics processing companies with only small quantities of lumps. Due to its low acquisition costs and its compact design, this machine makes an in-house recycling possible for blow moulding, film and injection moulding shops.
Fig. 2:
Herbold Shredder of the HR 62 P series
-The Granulator SML 45/60 SB with forced feeding (patent pending): this special granulator design can considerably reduce its energy demand – with a 30 to 50 % lower connected load compared to a traditional machine. Pre-shredded waste and hollow bodies can be recycled in a very economic way. Some 200 machines of this design have already been sold since the market launch.
Fig. 3:
Herbold Granulator SB series
In dialogue with the customer, HERBOLD Meckesheim will find the optimum solution for customer’s recycling problem. Tests can be made in Herbold’s technical centre where all the machines are available in production scale size for tests with customer’s original material.
For more information, please visit:
https://edir.bulk-online.com/profile...meckesheim.htm9167 herbold meckesheim.htm
Google Search:
http://www.google.de/search?client=s...ulk-online.comsearch?client=safari&rls=en&q=herbold+site:bulk online.com
http://www.google.de/search?q=herbol...=lnms&tbm=ischsearch?q=herbold+site:bulk online.com&hl=de&safe=active&client=safari&rls=en&prmd=ivns&source=lnms&tbm=isch
Attachments
fakuma_logo (JPG)
■