Tail Pulleys
a) Standards / norms employed for design of impact pad cradles, and
b) Some examples (drawings / sketches) of cost-effective cradles
Thanks
Kayem
=========================================================
You should also include the hardness of the rubber bars in your inquiry as well IMO.
contacts in alphabetical order for conveyor questions
George Baker ASSINCK Limited
Joseph Dos Santos Dos Santos International
Lawrence Nordell Conveyor Dynamics Incorporated
======================================
======================================
======================================
no specific order in this list.
Dunlop tire and rubber
Bridgestone tire and rubber
Goodyear tire and rubber
Yokohama tire and rubber company
Toyo tire and rubber company.
Kum Ho tire and rubber- from Korea- I hope that have that one right from memory
All the current conveyor manufacturers being JOY CCI, Krupp Robins, Long Airdox, to name but few.
===================================================================
CEMA
The conveyor equipment manufactures association is a member/manufacturer industry trace group.
===================================================================
American national standards institute
====================================================================
The society of automotive engineering-standards for steel etc.
====================================================================
WWW.ASTM.org materials testing
Any steel maker as they are members of industry trade groups and set many of their own standards for the products they smelt and form.
My many apologies if I missed others that are worthy of mention
lzaharis ■
Re: Impact Pad Support Cradle
http://www.metso.com/miningandconstruction/MaTobox7.nsf/DocsByID/DE3007EB7A5A221B42256AFC003FDF91/$File/1037CompEN.pdf
...will give you some ideas. ■
Re: Impact Pad Support Cradle
a) Standards / norms employed for design of impact pad cradles, and
b) Some examples (drawings / sketches) of cost-effective cradles
Thanks
Kayem
Just below the impact area, we are removing the impact idlers frames out side. Removing the idlers. Fixing the impact bars by welding on those frames. Finally we are fixing back this assembly to take care of the impact load.
Regards, ■
Impact Idler Assemblies
A few thoughts:
- breaking of idler assemblies can be caused by numerous reasons:
- DROPPING from too high onto the assemblies
- IMPACT idler centres could be too far c to c, move closer together
- think about install grizzly top above impact area if feasible
- slider beds can be put in by themselves or in conjunction with impact rollers
- if you need some spec, i would be happy to PDF something for you ■
Re: Impact Pad Support Cradle
Thank you Mr Baker. I would appreciate receiving any specs that you may have on this matter.
Regards ■
Impact Pad Support Cradle
Are there any standards for the cradle of Impact pads ? Since the cost of the assembly as well as the durability depends largely on the cradle, can someone provide me with inputs regarding -
a) Standards / norms employed for design of impact pad cradles, and
b) Some examples (drawings / sketches) of cost-effective cradles
Thanks
Kayem ■