BigBag Unloading Station

Posted in: , on 5. Feb. 2009 - 14:28

we used unloading station to discharged material. now i have a problem.

if the big bag volume is 2.4m^3, two unloading stations are used at the same time for discharging the two kind of material. because we need the two kinds material blending.

because the volume of bins is not enough. and we need the material of material is half emptying, then tie the big bag. the hoist it out of unloading station.

how can i do for the stutation?

first solution: need a special valve, this valve is automatic control, and if material is half emptying, then valve is closed, the operator tie the outlet of big bag.

who can give the information of valve . the valve core is made of rubber or close, so it can clamp the section of big bag. and the big bag can not be damaged.

■

Storage
Bag & Container Storage
Bags, Sacks & FIBCs
Bags
Replies
Login to add a Reply

Re: Bigbag Unloading Station

Posted on 6. Feb. 2009 - 01:05

DEAR TeUS

thank you for your reply, but i think i am not make myself clear.

i mean if during the unloading process, when we used 1ton/big bag to discharged material , if big bag is half emptying , then we need the big bag outlet section be tied by operator, then move it out of unloading station.

i think a valve is need for cut the material flow and can not damage the outlet connector of big bag, so operator can tie the connector section.

i know iris have the manual valve of this kind, but no automatic valve.

who can give me some ideas.

■

telschig
(not verified)

Re: Bigbag Unloading Station

Posted on 6. Feb. 2009 - 03:49

Dear Mr. kevinjcq,

we are supplier of Big - Bag emptying plants including pneumatic conveying systems. What kind of products you handle in your system?

I will visit Arabian Emirates in one week if your company is located there

i could visit your site.

Regards Horst ■

Re: Bigbag Unloading Station

Posted on 6. Feb. 2009 - 06:47
Quote Originally Posted by kevinjcgView Post
who can give the information of valve . the valve core is made of rubber or close, so it can clamp the section of big bag. and the big bag can not be damaged.

You seem to be looking for a pinch valve. Suppliers are not so plentiful but they would close the bag without damage. Try Warman International for a start. ■

Re: Bigbag Unloading Station

Posted on 9. Feb. 2009 - 02:59

thank you all

to teus thank you

to telschig : it is a pity, we do not have the site in Arabian Emirates, thank you for you help , could you give me some idea to this headache problem.

i konw Iris Diaphragm Valves , and i have this kind of valve, but it is a pity without automatic control valve.

BR

■

Re: Bigbag Unloading Station

Posted on 9. Feb. 2009 - 03:54

i think i have find the information i need

thank you all

BR

■