Shaft mounted speed reducers Posted in: Forums » News from the Industry » Company News , on 2. Jul. 2008 - 05:44 Involute Toolings offer shaft mounted speed reducers in 10 sizesfrom A to S with nominal ratios of 5:1, 13:1 and 20:1A wide range of final speed ratios may be achieved by use of pulley combinationsThe gearbox has been redesigned by changing the tooth design to give higher power to weight ratios for the same size gearbox.Shaft Mount Taper Clamp Units:Available to have a keyless gear unitthe taper clamps and support bushes are manufactured in stanless steels to prevent fretting corrosion and easy removal.Various sizes of bores are available for mounting on different shaft sizes.Shaft Mounted Screw Conveyor Units:The gear units for screw conveyors are available with taper roller bearings on the output end to take up axial thrust loadsThe gearboxes are available in imperial bores and keywaysCEMA flanges and drive shafts to suit the gearboxes are alsoavailableSpecials:modifications to customer specifications, higher reduction ratios,hydraulic motor mounts, higher torque gearboxes can be designed to customer specificationsSome Salient features of the speed reducer are as under:1) all torque arms/fulcrums are plated to eliminate them being rusted in use.2) the shaft mounts have labyrinth sealing on the conveyor end and input shaft end so that the oil seal is safe from contamination3) the front end of the shaft mount has a hub cover to protect thefront oil seal as well as moving part of the gearbox 4) input shaft front bearing is a roller bearing as it takes in moreradial load from the belt pressure5) breather plugs are extended so that the dust does not clog thebreather hole6) all oil seals are from taiwan which we import directly7)our gear units now have higher load capacity as the gears have been redesigned to 25 degree pressure angle8) All gears are case carburised to a casedepth and ground inhouse9) All gear units are machined on a CNC machining center so are very accurate in alignment10)The gearbox is being exported to europe where demands in quality are highExports are worldwide and the gear units are supplied to:UK under a brand name of POWERDRIVEAustralia under POWERDRIVEUSA as INDUSTRIAL POWERDRIVENorway as POWER GEAREgypt as VARSweden as TRANSMISSIONSSouth Africa as QUARRY SUPPLIESCanada, Nigeria , Oman, Brazil , Cyprus,Israel ,Saudi Arabia and various other countriesAttachments shaft-mounted-speed-reducer (JPG) ■ Conveying Transport Screw Conveyors Mechanical Conveying Reducers Fittings Piping & Tubing Elements Parts & Components Pneumatic Conveying Gearboxes Drive Systems Energy & Drive Systems Hydraulic Motors Motors Mining & Quarrying
Shaft mounted speed reducers
Involute Toolings offer shaft mounted speed reducers in 10 sizes
from A to S with nominal ratios of 5:1, 13:1 and 20:1
A wide range of final speed ratios may be achieved by use of pulley combinations
The gearbox has been redesigned by changing the tooth design to give higher power to weight ratios for the same size gearbox.
Shaft Mount Taper Clamp Units:
Available to have a keyless gear unit
the taper clamps and support bushes are manufactured in stanless steels to prevent fretting corrosion and easy removal.
Various sizes of bores are available for mounting on different shaft sizes.
Shaft Mounted Screw Conveyor Units:
The gear units for screw conveyors are available with taper roller bearings on the output end to take up axial thrust loads
The gearboxes are available in imperial bores and keyways
CEMA flanges and drive shafts to suit the gearboxes are also
available
Specials:
modifications to customer specifications, higher reduction ratios,
hydraulic motor mounts, higher torque gearboxes can be designed to customer specifications
Some Salient features of the speed reducer are as under:
1) all torque arms/fulcrums are plated to eliminate them being rusted in use.
2) the shaft mounts have labyrinth sealing on the conveyor end and input shaft end so that the oil seal is safe from contamination
3) the front end of the shaft mount has a hub cover to protect the
front oil seal as well as moving part of the gearbox
4) input shaft front bearing is a roller bearing as it takes in more
radial load from the belt pressure
5) breather plugs are extended so that the dust does not clog the
breather hole
6) all oil seals are from taiwan which we import directly
7)our gear units now have higher load capacity as the gears have been redesigned to 25 degree pressure angle
8) All gears are case carburised to a casedepth and ground inhouse
9) All gear units are machined on a CNC machining center so are very accurate in alignment
10)The gearbox is being exported to europe where demands in quality are high
Exports are worldwide and the gear units are supplied to:
UK under a brand name of POWERDRIVE
Australia under POWERDRIVE
USA as INDUSTRIAL POWERDRIVE
Norway as POWER GEAR
Egypt as VAR
Sweden as TRANSMISSIONS
South Africa as QUARRY SUPPLIES
Canada, Nigeria , Oman, Brazil , Cyprus,Israel ,Saudi Arabia and various other countries
Attachments
shaft-mounted-speed-reducer (JPG)
■