![Banner Advertisement "Foodtech Taipei" by Taiwan External Trade Development Council (TAITRA)](/sites/default/files/public/styles/adverts_mobile/public/adverts/2in1-945x130-en.jpg.webp)
Roll Crusher Tender
James
Regards
Simon Pearson
www.anglo-crushers.8m.net
Tel:+44 1484 543300 ■
Hot Clinker Roll Crusher
Please let us know the following to provide you with our offer for a Toothed Roll Crusher.
Feed Sieve Analysis
Bulk Density of the clinker
Temperature of the clinker
Capacity required by you. ■
Roll Crushers For Clinker
We specialise in crushing and milling equipment. In the past we have supplied roll crushers to power stations. Units are available with air or water cooling,if required. Please advise the follwing information and we will quote accordingly;
Level of protection, IP55/flameproof?
Maximum temperature of clinker?
Largest lump or hopper outlet size?
Peter Jackson
Glen Creston Ltd.,
16 Dalston Gardens,
Stanmore,
Middlesex,
HA7 1BU
Tel; 020 8206 0123 ■
Clinker Roll Crusher Type
Hello James:
I can supply you with proven in the field users of ROLL CRUSHERS doing this job......as per your request in this forum.
IF you would be kind enough to supply me with the bid specs, with all pertinent details, I will be happy to quote the proper size required.
Best Regards, George Baker ■
Re: Hot Clinker Roll Crusher
Hi James,
Greenbank have good experience in providing crushers to the Power Industry and have a range of Roll Crushers on offer for our customers.
Please email details and specifications to markx@greenbank.tv and I will be happy to provide a tender to your requirements.
Regards,
Mark ■
Clinker Crusher
Hi,
IKN germany supplies coolers based on coanda principle.They also supply clinker crusher,whose performance is by far the best I have come across.
venkat ■
Hot Clinker Roll Crusher
Hi All,
At the end of cement plant clinker kilns there is a grate type cooler and a clinker crusher to reduce lump size to less than 50mm ...clinker sometimes forms in large round boulders and snowmen structures. All lumps, boulders, snowmen etc have to be crushed.
If this is not done, the kiln must be brought off line to remove the blockage/lump.
There are two types of crushers used - hammer and roll type.
We have a hammer type and are considering converting to a roll type. Hammer types have high wear and can jam with large lumps.
We are considering buying the cooler OEM's roll crusher.
Does anyone have good/bad experiences with clinker roll crsuhers?
Also....any suppliers out there with proven roll crsuhers for clinker willing to provide a tenders?
Thanks
James ■