This arrangement was served for the interpretation of standard arrangements.
The Pocketlift-Inner conveyor system has a 75 kW hydraulic-driving, the conveyor capacityof the belt is for approx. 350 m3/h or 500 t/h. The statics of the arrangement, nevertheless, for about 50 meters at an support level 0,0. Besides, the arrangement has an at the side delivering that conveyor belt on the head end, with a drum motor.
The head- and bottom station also is able to autonomous, e.g., are used as a shaft conveyor. The conveyor pockets of the belt have a benefit width of 500 mm and a width of approx. 400 mm, they can take up grain sizes up to 250 mm. The running time is approx. 1000 hours.
Pocketlift-Inner conveyor
This arrangement was served for the interpretation of standard arrangements.
The Pocketlift-Inner conveyor system has a 75 kW hydraulic-driving, the conveyor capacityof the belt is for approx. 350 m3/h or 500 t/h. The statics of the arrangement, nevertheless, for about 50 meters at an support level 0,0. Besides, the arrangement has an at the side delivering that conveyor belt on the head end, with a drum motor.
The head- and bottom station also is able to autonomous, e.g., are used as a shaft conveyor. The conveyor pockets of the belt have a benefit width of 500 mm and a width of approx. 400 mm, they can take up grain sizes up to 250 mm. The running time is approx. 1000 hours.
At interest, please contact Mister Richard - office@hasesystems.at
Attachments
pocketlifta (JPG)
■