AWIS is an automatic system for factories truck loading and weighing manipulation. There are five different weighing procedures according to the programmed card type such as: Bulk loading, material sent, intake material, other types of weighing and internal factory handle.
System Overview
User’s full programmable weighing tickets:
• Separate Ticket For First and Second Weighing
• Separate Ticket For each Weighing Procedure
• Separate Ticket For each Weighing Terminal
• Ticket Printed on Network PC or Weighing Indicator
• Entry – Exit From any Weighing Point
Advanced vehicle management:
• Vehicle Legal Gross Check
• Vehicle Nominal Tare Check
• Card Type Specic Checks before each Weighing
• Truck can be Joined at Groups for Easy Management
• Different Truck types
• Permanent or Temporary Cards for each Vehicle
Bulk Loading:
• Up to Fifteen Silo Connected at each Weighing Terminal
• Programmable recipe for each Silo(Coarse,ne,preact)
• Custom or General Recipe for Each truck or Card.
• Several cross checking procedures take place in, before, after and in parallel, such as Cross checking of Tare and Net,Over load checking, Recipe Checking etc
• Reporting for the Waiting time before each loading is accomplished!
• Drivers Waiting Turn
Dierent Card Expiration:
• Cards Can be expired and automatically deleted from the system maximum loading, Expiration Date, or maximum Routes
• Cards can be programmed but Disabled.
• Dierent Type of Checks depended on card Category.
• Dierent Waiting time For each card
Minimal Operation required by Drivers:
• mDriver Only pass the barcode card trough a local badge reader and then the silo discharges automatically the quantity that was specied by the Central Planning Oce
• Any Errors or Check Faults Reported From the main System will be Displayed to the driver from the Terminal’s Display.
• Terminal Keys can be Un/locked From the Main System Operator
Minimal Operation required by Operators:
• The AWIS Operator can have a complete Knowledge of the weighing terminals from a monitor screen
• Any Errors or Check Faults Reported From the main Systems monitor to the operator with a sound alarm and blinking Errors.
• The AWIS Operator can Acknowledge any errors just by making a click on a button.
• The Operator can Remotely access the weighing terminal (Zero, Lock, Send Messages, restart etc).
Minimal Operation required by the Card Programmers:
• The Card Programmer can program any type of card with minimal procedures.
• The State of each Programmed card can be easily viewed by the programmer.
Truck Loading Weighbridge System
Truck Loading Weighbridge System (AWIS)
AWIS is an automatic system for factories truck loading and weighing manipulation. There are five different weighing procedures according to the programmed card type such as: Bulk loading, material sent, intake material, other types of weighing and internal factory handle.
System Overview
User’s full programmable weighing tickets:
• Separate Ticket For First and Second Weighing
• Separate Ticket For each Weighing Procedure
• Separate Ticket For each Weighing Terminal
• Ticket Printed on Network PC or Weighing Indicator
• Entry – Exit From any Weighing Point
Advanced vehicle management:
• Vehicle Legal Gross Check
• Vehicle Nominal Tare Check
• Card Type Specic Checks before each Weighing
• Truck can be Joined at Groups for Easy Management
• Different Truck types
• Permanent or Temporary Cards for each Vehicle
Bulk Loading:
• Up to Fifteen Silo Connected at each Weighing Terminal
• Programmable recipe for each Silo(Coarse,ne,preact)
• Custom or General Recipe for Each truck or Card.
• Several cross checking procedures take place in, before, after and in parallel, such as Cross checking of Tare and Net,Over load checking, Recipe Checking etc
• Remote Loading Control(Stop,Pause,Ticket Print etc)
• Trac lights or Sound Signals for Drivers
• Remote Messages On Indicator Screen For Driver
Drivers Waiting List:
• Reporting for the Waiting time before each loading is accomplished!
• Drivers Waiting Turn
Dierent Card Expiration:
• Cards Can be expired and automatically deleted from the system maximum loading, Expiration Date, or maximum Routes
• Cards can be programmed but Disabled.
• Dierent Type of Checks depended on card Category.
• Dierent Waiting time For each card
Minimal Operation required by Drivers:
• mDriver Only pass the barcode card trough a local badge reader and then the silo discharges automatically the quantity that was specied by the Central Planning Oce
• Any Errors or Check Faults Reported From the main System will be Displayed to the driver from the Terminal’s Display.
• Terminal Keys can be Un/locked From the Main System Operator
Minimal Operation required by Operators:
• The AWIS Operator can have a complete Knowledge of the weighing terminals from a monitor screen
• Any Errors or Check Faults Reported From the main Systems monitor to the operator with a sound alarm and blinking Errors.
• The AWIS Operator can Acknowledge any errors just by making a click on a button.
• The Operator can Remotely access the weighing terminal (Zero, Lock, Send Messages, restart etc).
Minimal Operation required by the Card Programmers:
• The Card Programmer can program any type of card with minimal procedures.
• The State of each Programmed card can be easily viewed by the programmer.
• Easy Graphical User Interface
Open Connectivity With ERP Systems:
• Data Can Be exported To Files.
• Data Can Be Imported From Files.
For more information, please visit:
https://edir.bulk-online.com/profile...ngineering.htm8932 leon engineering.htm
http://www.google.de/search?num=100&...=&oq=&gsrfai=search?num=100&hl=de&client=safari&rls=en&q=leon+engineering+site%3Abulk online.com&btnG=Suche&aq=f&aqi=&aql=&oq=&gsrfai=
Please also watch:
http://www.youtube.com/watch?v=vu05W...ayerembedded#watch?v=vu05WFCEUm4&feature=playerembedded#!
Attachments
leon_eng_logo (GIF)
■