Re: Need Bulk Cement Pump
Dear TuntVietNam,
Are you referring to dump trucks or bulktankers with their own compressor on board.?
A pneumatic cement conveying system of approx. 400 tons/hr with a horizontal length of 15 m and a vertical length of 65 m, will comprise a compressor of 60 m3/min at 2.5 bar and a 16” pipeline.
On top of the silo, a filter of approx 120 m2 and an over- underpressure valve has to be installed.
As a bulk tanker normally loads approx.30 tons of cement, the chosen unloading rate of approx. 400 tons/hr seems rather high.
best regards
Teus ■
Teus
Re: Need Bulk Cement Pump
Sorry,
I made an error in my previous post.
The pump capacity should be 120 m3/min instead of 60 m3/min
Teus ■
Teus
Buck Cement Pump
Thank Teus Tuinenburg, I am very happy while receive your reply. I have problem with buck cement pump to transport buck cement from truck to top of silo cement. Dear Teus Tuinenburg, if you have pump drawing in autocad, please send me a coppy follow email address: tunt.bk1998@gmail.com.
I look forward to hearing from you.
Thankyou very much.
TuntVietNam. ■
Re: Need Bulk Cement Pump
Dear TuntVietNam,
Can you describe your bulk cement pump in more detail as well as the problems
you are encountering.
Or, if you are referring to a new project, please describe the project more in detail.
Emptying a cement bulktruck cannot be that difficult, however if you want
to achieve 400 tons/hr in emptying a bulktruck, that is not an ordinary project.
Success
Teus ■
Teus
Need Buck Pump
Dear Teus
Thank for your reply, it is very good for me. So can you tell me about the power of the motor for the pump.
Teus, do you know about the equipment that we call " pallet", it use to packing the cement bag in to a mass (with 20 bag a mass it mean that 1000 tons a mass and cover by PVC to protect from water). Please give me some information about it, the power of motor, weight, price...
Thankyou very much. ■
Re: Need Bulk Cement Pump
Dear TuntVietNam,
I am a little bit puzzled about your questions.
Is it possible to supply more information about the system, which you want to realize?
best regards
Teus ■
Teus
Re: Need Bulk Cement Pump
It is a very confusing process. I suspect there is an intermediate process vessel(s) involved. Blowing 9 powder tubs (road tanks) at any one time into a single silo involves a lot of safety issues.
When there is a mention of bagged consignmnets the thought of slitting 8000 bags per hour is daunting but not impossible.
Intermediate holding vessels would probably need siting below ground, for gravity filling, and probaly fill and subsequently feed the silo in sequence.
This situation seems to need a lot of conceptual work rather than just pump data charts. ■
Need bulk cement pump
Hi all, i am the firts time sending new thread in this forum so I would say hello to everybody. I have a problem and needing to your help.
I have a port plan in this buck cement transport from truck to the silo by pump with working height is 65m. The capacity of the pump about 400tons/hour. Some one can help me the type of pump, weight of the pump, price of pump, the dimension of the transport pipe, and the most important is send me a autocad file of pump General drawing.
Thank. ■