Jenike & Johanson will be presenting the following AIChE sponsored courses in San Francisco (April 9-11) at the AMA Conference Center and in Toronto (June 18-20) at the Canadian Management Centre.
Flow of Solids in Bins,
Hoppers, Chutes, and Feeders
This valuable training covers:
• A wide range of bulk material handling equipment & problems
• A better understanding of how wall friction, cohesion, bulk density, and other properties affect solids flow through bins, feeders, and chutes
• Retrofits to equipment to correct costly flow problems
• Proven methods for solving segregation, uncontrolled powder flow, material stagnation, and ratholing
• Common pitfalls in handling powders and bulk solids
Pneumatic Conveying of Bulk Solids
This valuable training covers:
• A review of common pneumatic conveying terms
• Problems and practical solutions
• Key components needed for a pneumatic conveying system
• Effective troubleshooting practices to solve costly transport problems
• Dilute vs. dense phase conveying
• Discussion of dust explosions
Who Should Attend?
Design, project, and research engineers, as well as plant operators responsible for solving and preventing flow problems or purchasing solids handling equipment.
Jenike & Johanson engineers have been presenting courses for AIChE for over 35 years. We incorporate several workshops for participants to work out problems, while applying the theory they have just learned.
Registration & Fees
Registration is made entirely through AIChE. Register online at the AIChE Education portal for the Pneumatic Conveying course. You can also call AIChE directly at 800-242-4363 or 203-702-7660, if outside the USA.
The suggested hotel for the San Francisco course is the Marriott Marquis on Fourth Street. The suggested hotel for the Toronto course is the Hilton Toronto.
The fee for the two-day Flow of Solids course is $1,195 for AIChE members and $1,395 for non-members. For the Pneumatic Conveying one-day course, the fee is $795 for AIChE members and $995 for non-members. Contact AIChE to inquire about "early bird" discounts. The two-day course provides 1.5 continuing education credits (CEU's) or 15 professional development hours (PDH's). The one-day Pneumatic Conveying course provides 0.8 CEU's or 8 PDH's.
As an alternative, these courses can be presented at your plant or facility, enabling us to focus on your company's particular flow-related concerns, and discuss related issues in confidence. Contact courses12@jenike.com for details.
If you know of a colleague that can benefit from taking these courses, please forward this email. We look forward to providing you with practical, cost-effective solutions to your bulk solids handling problems.
Jenike & Johanson Courses
Jenike & Johanson will be presenting the following AIChE sponsored courses in San Francisco (April 9-11) at the AMA Conference Center and in Toronto (June 18-20) at the Canadian Management Centre.
Hoppers, Chutes, and Feeders
This valuable training covers:
• A wide range of bulk material handling equipment & problems
• A better understanding of how wall friction, cohesion, bulk density, and other properties affect solids flow through bins, feeders, and chutes
• Retrofits to equipment to correct costly flow problems
• Proven methods for solving segregation, uncontrolled powder flow, material stagnation, and ratholing
• Common pitfalls in handling powders and bulk solids
This valuable training covers:
• A review of common pneumatic conveying terms
• Problems and practical solutions
• Key components needed for a pneumatic conveying system
• Effective troubleshooting practices to solve costly transport problems
• Dilute vs. dense phase conveying
• Discussion of dust explosions
Who Should Attend?
Design, project, and research engineers, as well as plant operators responsible for solving and preventing flow problems or purchasing solids handling equipment.
Jenike & Johanson engineers have been presenting courses for AIChE for over 35 years. We incorporate several workshops for participants to work out problems, while applying the theory they have just learned.
Registration & Fees
Registration is made entirely through AIChE. Register online at the AIChE Education portal for the Pneumatic Conveying course. You can also call AIChE directly at 800-242-4363 or 203-702-7660, if outside the USA.
The suggested hotel for the San Francisco course is the Marriott Marquis on Fourth Street. The suggested hotel for the Toronto course is the Hilton Toronto.
The fee for the two-day Flow of Solids course is $1,195 for AIChE members and $1,395 for non-members. For the Pneumatic Conveying one-day course, the fee is $795 for AIChE members and $995 for non-members. Contact AIChE to inquire about "early bird" discounts. The two-day course provides 1.5 continuing education credits (CEU's) or 15 professional development hours (PDH's). The one-day Pneumatic Conveying course provides 0.8 CEU's or 8 PDH's.
As an alternative, these courses can be presented at your plant or facility, enabling us to focus on your company's particular flow-related concerns, and discuss related issues in confidence. Contact
If you know of a colleague that can benefit from taking these courses, please forward this email. We look forward to providing you with practical, cost-effective solutions to your bulk solids handling problems.
Sincerely,
Eric Maynard
Jenike & Johanson, Inc.
Tel: 978-649-3300
www.jenike.comwww.jenike.com
https://edir.bulk-online.com/profile...e-johanson.htm1764 jenike johanson.htm
Google Search:
http://www.google.com/search?client=...ulk-online.comsearch?client=safari&rls=en&q=Jenike+Johanson+site:bulk online.com
http://www.google.com/search?q=Jenik...=lnms&tbm=ischsearch?q=Jenike+Johanson+site:bulk online.com&hl=en&client=safari&rls=en&source=lnms&tbm=isch