Blending Conveyor (Reclaim Coal)
Blending Conveyor (reclaim coal) - min TPH of 1500
We are a major coal transfer terminal in US, seeking improved mobile conveyor equipment which would primarily be used in blending (combined with Krupp Stacker/Reclaimer, or FMC Barge Unloader) - Looking for short lead time options. New mobile conveyors like Metso, Telestak, etc. are perfect - problem is long lead time of 9 months. Thoughts & recommendations appreciated. Is there a used market for high functioning transfer equipment of this nature? ■
Blending Conveyor (Reclaim Coal)
Blending Conveyor (reclaim coal) - min TPH of 1500
We are a major coal transfer terminal in US, seeking improved mobile conveyor equipment which would primarily be used in blending (combined with Krupp Stacker/Reclaimer, or FMC Barge Unloader) - Looking for short lead time options. New mobile conveyors like Metso, Telestak, etc. are perfect - problem is long lead time of 9 months. Thoughts & recommendations appreciated. Is there a used market for high functioning transfer equipment of this nature? ■
Coal Etc.
We are seeking a mobile conveyor with at least 1500tph rated speed - To be used to reclaim coal onto a 72" belt for shiploading - primary use in blending operations (in conjunction with Stacker/Reclaimer or CBU - continuous barge unloader)
Options reviewed include Telestack Hopper Belt Reclaim Feeder Conveyor
We will use new purchase option, but long lead time of 8-9 months is problematic - Immediate delivery woudl be preferred
I will offer what I consider a offer a viable suggestion if your interested
and willing to examine it.
Further I have no financial interest with the the
following companys.
Super Products Incorporated, Mine Controls Incorporated
The use of a battery of the Super Products "Super Sucker" vacuum units to transfer the material is a viable option as you could place 2 or 3 of them on an 80 foot flat car or stack them two high for 6 units and run as much hose where ever it is needed using an electric driven option and a trailing cable to feed it with 3-6 480-volt 3-phase loads and ground faults, which in its self is very small for a load center supplied with one 4,000 volt feeder with three legs and disconnects.
The switch gear and transformers are equipped with the GFIC system and and can be simply weather proofed or fully weather sealed and water proof.
The "X" numbers of units could be installed in dry building with the load center out side the building and simply work and work and transfer the material using cyclones to eject the material to a conveyor or a second destination.
The Super Sucker uses 8 inch suction lines to accomplish its job.
At least you will only have to position the vertical suction piping(s) and let it go to work.
with little effort.
At most you would need to lower a small loader and hopper with a single row sizer to break the material and allow the suction systems to go to work transfering the coal sized by the single row breaker.
The Super Sucker is used world wide in minerals like coal, hematite, iron concentrate, copper and copper concentrates using 28"Hg. and 13 P.S.I., using 5,800 cubic feet of air per minute.
The Super Sucker takes full advantage of the 6 laws of gasses and thier high efficiency due to the sealed pipeline.
It would not take much to prepare a system and building in electric motor operation and three trailing cables to an all weather switch gear and all weather transformer set from Mine Controls Incorporated.
The set up would be faster and require less work to install the system.
The 8" hoses and vertical piping will be easily moved using rubber tired fork lifts and staged.
The use of the Super Sucker will cost less to purchase and install and operate as there is much less
equipment to own, operate, and maintain.
The Super Sucker pipelines may require pipeline pigging using pig balls but that is simply stuffing a pig ball in the pipe and turning the system on for suction or pressure and then waiting for the pig to enter the collection hopper or exit the last suction pipe. ■
Coal Etc.
We are seeking a mobile conveyor with at least 1500tph rated speed - To be used to reclaim coal onto a 72" belt for shiploading - primary use in blending operations (in conjunction with Stacker/Reclaimer or CBU - continuous barge unloader)
Options reviewed include Telestack Hopper Belt Reclaim Feeder Conveyor
We will use new purchase option, but long lead time of 8-9 months is problematic - Immediate delivery woudl be preferred
I will offer what I consider a offer a viable suggestion if your interested
and willing to examine it.
Further I have no financial interest with the the
following companys.
Super Products Incorporated, Mine Controls Incorporated
The use of a battery of the Super Products "Super Sucker" vacuum units to transfer the material is a viable option as you could place 2 or 3 of them on an 80 foot flat car or stack them two high for 6 units and run as much hose where ever it is needed using an electric driven option and a trailing cable to feed it with 3-6 480-volt 3-phase loads and ground faults, which in its self is very small for a load center supplied with one 4,000 volt feeder with three legs and disconnects.
The switch gear and transformers are equipped with the GFIC system and and can be simply weather proofed or fully weather sealed and water proof.
The "X" numbers of units could be installed in dry building with the load center out side the building and simply work and work and transfer the material using cyclones to eject the material to a conveyor or a second destination.
The Super Sucker uses 8 inch suction lines to accomplish its job.
At least you will only have to position the vertical suction piping(s) and let it go to work.
with little effort.
At most you would need to lower a small loader and hopper with a single row sizer to break the material and allow the suction systems to go to work transfering the coal sized by the single row breaker.
The Super Sucker is used world wide in minerals like coal, hematite, iron concentrate, copper and copper concentrates using 28"Hg. and 13 P.S.I., using 5,800 cubic feet of air per minute.
The Super Sucker takes full advantage of the 6 laws of gasses and thier high efficiency due to the sealed pipeline.
It would not take much to prepare a system and building in electric motor operation and three trailing cables to an all weather switch gear and all weather transformer set from Mine Controls Incorporated.
The set up would be faster and require less work to install the system.
The 8" hoses and vertical piping will be easily moved using rubber tired fork lifts and staged.
The use of the Super Sucker will cost less to purchase and install and operate as there is much less
equipment to own, operate, and maintain.
The Super Sucker pipelines may require pipeline pigging using pig balls but that is simply stuffing a pig ball in the pipe and turning the system on for suction or pressure and then waiting for the pig to enter the collection hopper or exit the last suction pipe. ■
Blending Conveyor (Reclaim Coal) Blending Conveyor (Reclaim Coa…
BulkTerm
Will you please send a sketch/drawing showing the arrangement, so that we can provide a specific proposal.
We are Engineering Service Provider in the field of bulk material handling. To cut short the delivery time of 8/9 months, we propose to provide you the complete design, so that you can manufacture it locally.
With regards,
C B Ray
Techgroup Solutions
62, Rajendranagar, Sakchi,
Jamshedpur - 831001, India
Tel: 91 657 2228921
Mob: 91 9931114980
Email:techgroup6@gmail.com
http://sites.google.com/site/techgroupsolutions ■
Blending Conveyor (Reclaim Coal) Blending Conveyor (Reclaim Coa…
BulkTerm
Will you please send a sketch/drawing showing the arrangement, so that we can provide a specific proposal.
We are Engineering Service Provider in the field of bulk material handling. To cut short the delivery time of 8/9 months, we propose to provide you the complete design, so that you can manufacture it locally.
With regards,
C B Ray
Techgroup Solutions
62, Rajendranagar, Sakchi,
Jamshedpur - 831001, India
Tel: 91 657 2228921
Mob: 91 9931114980
Email:techgroup6@gmail.com
http://sites.google.com/site/techgroupsolutions ■
Reclaim Conveyor / Coal Transfer
1500 TPH (min) Reclaim Conveyor / Dozer Trap - Coal Transfer
We are seeking a mobile conveyor with at least 1500tph rated speed - To be used to reclaim coal onto a 72" belt for shiploading - primary use in blending operations (in conjunction with Stacker/Reclaimer or CBU - continuous barge unloader)
Options reviewed include Telestack Hopper Belt Reclaim Feeder Conveyor
We will use new purchase option, but long lead time of 8-9 months is problematic - Immediate delivery woudl be preferred ■