Re: Grind Sugar Pumping
Dear uditha,
Are you referring to a venturi-eductor system, where a compressor enters a venturi and the venturi sucks in and mixes the sugar and the mixture is blown to the destination, where a filter receiver separates the sugar from the conveying air?
Or are you referring to a venturi vacuum pump with a vacuum system?
BR
Teus ■
Teus
Re: Grind Sugar Pumping
For the distance of 8 ft horizontal & 3 ft vertical your selection is absolutely wrong in my opinion. For 1 tph at these distances I would use a screw conveyor probably you will need a small 4” diameter screw to do the job. ■
Re: Grind Sugar Pumping
venturi should work, make sure air is dry or consider using a conveying screw for that distance, if designed properly, the screw is the best solution ■
Re: Grind Sugar Pumping
Are you referring to a venturi-eductor system, where a compressor enters a venturi and the venturi sucks in and mixes the sugar and the mixture is blown to the destination, where a filter receiver separates the sugar from the conveying air?
Or are you referring to a venturi vacuum pump with a vacuum system?
BR
Teus
Dear Mr. Teus
Yes , its venturi - eductor system, final discharging point there is small cyclon separator. one filterbag mount to top side ? bottom we collect sugar ?
concept is right ?
Thanks
uditha ■
Re: Grind Sugar Pumping
Dear uditha,
Yes, I would say that the concept is right, although the remark of Mantoo makes also sense.
In case of chosing the pneumatic option, pay attention to the remark of Rod
For venturi's look at:
http://www.foxvalve.com/iindex2.aspx
have a nice day
Teus ■
Teus
Grind Sugar Pumping
I try to use transport sugar (powder - after grinding ) very short distance (8 ft hor , 3 ft vertical) . I am interesting to use venturi pump , I like to buy from USA or UK brand ?
My question is any one have a experience in handling grind sugar ? capacity is 1 tonne/hr . My selection is correct ? where is the cheapest , quality product ?
Thanks
Uditha Kohowala
Sigma Technologies
53/46 , Eksath Mawatha
kandy Rd
kalagedihena
Sri Lanka
+94 0777 55 16 50 , +94 033 222 66 50
uditha@sigmatechnologieslk.com ■