Fly Ash And Coal Fines
Originally Posted by AndrewDonald
--------------------------------------------------------------------------------------------
A battery of flat belt vacuum filters is appropriate due to its large suction surface area and simplicity.
[url]www.flsmidth.com/vacuumfilters ■
Fly Ash And Coal Fines
Originally Posted by AndrewDonald--------------------------------------------------------------------------------------------
A battery of flat belt vacuum filters is appropriate due to its large suction surface area and simplicity.
[url]www.flsmidth.com/vacuumfilters ■
L F Pumping - Mobile Lamiflo Drying Unit
Andrew,
The Mobile Drying Units, now available from LF Pumping, will be able to assist with this enquiry. They can reduce the moisture content, on a whole host of various differing materials. One of the key aspects of mobile drying, is that you are very unlikely to have access to direct heat sources, used in many traditional drying methods.
We need access to electricty via generators, or a direct power source, and can reduce the moisture content as per your enquiry, for very little cost. The tonnage is absolutely no problems, up to 250 tonnes per hour.
What sort of mositure are you looking to remove, integral / inherent or surface?
What approx particle or aggregate size?
How many tonnes in total?
What is the purpose behind reducing the moisture content? is it transport carbon & cost cutting or increasing the calorfic value of the materials before using it to generate electricity.
Are you looking for just mositure reduction or material handling as well?
These latest mobile drying units, can be stationed and moved around the world, to suit your site, and to suit your materials, and moisture content reduction. Just plug them in, and press Go. We offer a complete one stop shop whether at the mine itself or at the power generation premises, or both. These units are extremely energy and cost efficient. http://www.lfpumping.com ■
L F Pumping - Mobile Lamiflo Drying Unit
Andrew,
The Mobile Drying Units, now available from LF Pumping, will be able to assist with this enquiry. They can reduce the moisture content, on a whole host of various differing materials. One of the key aspects of mobile drying, is that you are very unlikely to have access to direct heat sources, used in many traditional drying methods.
We need access to electricty via generators, or a direct power source, and can reduce the moisture content as per your enquiry, for very little cost. The tonnage is absolutely no problems, up to 250 tonnes per hour.
What sort of mositure are you looking to remove, integral / inherent or surface?
What approx particle or aggregate size?
How many tonnes in total?
What is the purpose behind reducing the moisture content? is it transport carbon & cost cutting or increasing the calorfic value of the materials before using it to generate electricity.
Are you looking for just mositure reduction or material handling as well?
These latest mobile drying units, can be stationed and moved around the world, to suit your site, and to suit your materials, and moisture content reduction. Just plug them in, and press Go. We offer a complete one stop shop whether at the mine itself or at the power generation premises, or both. These units are extremely energy and cost efficient. http://www.lfpumping.com ■
Mobile Drying Of Fly Ash
Hello,
Hopefully you have heard of "HOLO-flo" Screw Dryers. If not, I invite you to visit our website at www.holo-flo.com.
These are hollow screw processors wherein the heat transfer medium, (steam or hot oil), is allowed to circulate inside the screws and jacketed housing to provide an indirect heat exchange. The "HOLO-flo" units maybe installed on top of trailers in series or parallel units. This type of design will provide you the heating, drying and mobility you require.
Thank you and if you have any further questions, please send us an email at n.nicdao@holo-flo.com.
Jig Nicdao
Helitherm ■
Mobile Drying Of Fly Ash
Hello,
Hopefully you have heard of "HOLO-flo" Screw Dryers. If not, I invite you to visit our website at www.holo-flo.com.
These are hollow screw processors wherein the heat transfer medium, (steam or hot oil), is allowed to circulate inside the screws and jacketed housing to provide an indirect heat exchange. The "HOLO-flo" units maybe installed on top of trailers in series or parallel units. This type of design will provide you the heating, drying and mobility you require.
Thank you and if you have any further questions, please send us an email at n.nicdao@holo-flo.com.
Jig Nicdao
Helitherm ■
Mobile Drying Units For Large Tonnage Projects - Lf Pumping Ltd
LF Pumping are proud to annouce that we now offer a mobile contract drying and material handling service. The LamiFlo drying units are vehicle mounted, therefore access to any site with a drying unit, is now achievable.
Facts to consider:-
1. The LamiFlo units use electrical supply, and do not require gas, gasoil etc etc for direct heat.
2. Light weight, and compact units mounted to tautliner trailers.
3. Available to the global market, to any site where access for tautliners is achieveable.
4. Length of contracts from months to years.
5. Tonnage per hour currently up to 250 tonnes.
6. Quoted as rates per tonne, excluding supply of power.
7. All units supplied with an full time operational supervisor, to then train and use local labour.
8. Ideal materials sands, small particle minerals, dusts, powders, & crushed coals in any market sector.
9. The units can be used to material handle materials, transporting the material vertically as well as horizontally up to 200 metres.
10. All actual materials tested to confirm suitability.
Benefits:-
1. Material can be dried at the mine or quarry to reduce transportation of excess moisture.
2. Units can be brought in to to assist as pre-dryers, to fixed drying solutions, to drive down running costs, and cut energy usage.
3. Reduction of carbon footprint whether using the LamiFlo system for material handling or drying.
When we think of all the excess moisture being transported around the world, having an envornmental impact, and financial cost, both can be significantly reduced with the mobile LamiFlo drying units from LF Pumping Ltd.
For more information info@lfpumping.com
http://www.lfpumping.com ■
Mobile Drying Units For Large Tonnage Projects - Lf Pumping Ltd
LF Pumping are proud to annouce that we now offer a mobile contract drying and material handling service. The LamiFlo drying units are vehicle mounted, therefore access to any site with a drying unit, is now achievable.
Facts to consider:-
1. The LamiFlo units use electrical supply, and do not require gas, gasoil etc etc for direct heat.
2. Light weight, and compact units mounted to tautliner trailers.
3. Available to the global market, to any site where access for tautliners is achieveable.
4. Length of contracts from months to years.
5. Tonnage per hour currently up to 250 tonnes.
6. Quoted as rates per tonne, excluding supply of power.
7. All units supplied with an full time operational supervisor, to then train and use local labour.
8. Ideal materials sands, small particle minerals, dusts, powders, & crushed coals in any market sector.
9. The units can be used to material handle materials, transporting the material vertically as well as horizontally up to 200 metres.
10. All actual materials tested to confirm suitability.
Benefits:-
1. Material can be dried at the mine or quarry to reduce transportation of excess moisture.
2. Units can be brought in to to assist as pre-dryers, to fixed drying solutions, to drive down running costs, and cut energy usage.
3. Reduction of carbon footprint whether using the LamiFlo system for material handling or drying.
When we think of all the excess moisture being transported around the world, having an envornmental impact, and financial cost, both can be significantly reduced with the mobile LamiFlo drying units from LF Pumping Ltd.
For more information info@lfpumping.com
http://www.lfpumping.com ■
Mobile Drying for Large Volumes
Looking for a method to dry Fly ash and Coal dust with moisture contents of approx 35% with a requirement to reduce to 15%. Throughput from 100 to 250 tonnes per hour. Sites are worldwide and varied. ■