Some General Answer: Assuming reasonably free flowing material under 6% moisture (which by the way is considered dry)

Your information and my response below:

MATERIAL TO BE HANDLED :- CRUSHED AGGREGATE

I will make assumption .....100 lbs/cu/ft typical limestone

2)CAPACITY :- 70TPH

I will assume (STPH) Imperial Tons

3)FEEDING EQUIPMENT :- BELT COPNVEYOR

Conveyor should be miniumum 36" wide, but ensure a full spread to full width of the screen to ensure we get the tonnage out

4)TYPE OF SCREEN: See below pick

5)MATERIAL TO BE SCREEN :- BELOW 6MM

Assume install 6mm square opening,T304 stainless steel, middling wire diameter range (Could go FLEXMAT) if needed - a superior choice especially if crushed material

OVER SIZE :- (-)75 TO (-)6MM

6) QTY :-4 NOS ???

CAN SOMEONE SUGGEST THE FOLLOWING:-

1)TYPE OF SCREEN IE ROTARY / VIBRATING

Circle throw, vibratings screen at 25 degree decline,

1/4 (6mm) circle 1000-1100 rpm range, running counterflow

rotation

2) SIZE OF SCREEN: 5x16 (90 sq ft screening area) Assuming we can pass between .8 to 1.0 tons per sq foot by sizing and without the benefit of a full sieve analysis of the feed

3) MOTOR HP ETC. 7.5 Hp

4) MANUFACTURER NAME: Dillon screen 2 brg circle throw inclined

NOTE: Could be smaller depending on sieve analysis....if we do anything here.....SMALLER stroke and faster RPM and steeper angle are all do-able by the rules.

Many makes of screens can do this job quite nicely. ■

Hello BALVINDER:

For sure the type of screen I have described is offered by many companies worldwide, quite common actually.

You would have India supply or pretty close by.

The screen I mentioned we actually manufacture here in Canada but, as mentioned lots of people make this type and I do not want to be biased....on promoting our screen.

The key is to get the setup correct on speed, slope and stroke. ■

yOUR WISH is my command. ■

4 weeks R/O ■

Week of Aug 7th out of town all week

Try to lineup Week of Aug 21 or Aug 31st if at all possible.

THANKS ■

wash the materials to remove the mud first,

THEN screen or size the actual product you

wish to retain.

if you screen them in a mixed state, the results

will still be mixed and of lesser quality or

value. ■

DEAR

MR BALVINDER SINGH

You may contact Mr. Rajarshi Ganguly (0-94330 25117) of Sanraj Projects Pvt Ltd Kolkata they have lot of supply of this type of vibrating screen

Regards

Santanu Mukherjee ■

Dear Sir,

We, VOLTAS LIMITED (India's leading Engineering Service Provider Company - A TATA Enterprise), Mining and Construction Equipment division manufacture Wheel Mounted Portable Crushing & Screening Plants for Aggregates, LimeStone, Iron-Ore and other mineral application having capacity of 150, 200, 250 & 300 TPH with JAW, CONE and VSI (Vertical Shaft Impector) combination at our State-Of-Art factory in Mumbai-INDIA.

Please consult us, if you required any further information

Thanks / Regards,

Tejash Modi

(Sales - Crushing & Screening Equip.)

Mobile: 0 99989 88030

E-mail: tejashmodi@voltas.com

VOLTAS LIMITED

(Mining & Construction Equipments Div.)

2nd Floor, Pushpak Building,

Khanpur, Ahmedabad - 380 001 INDIA

Ph: +91 79 6630 1157 Fax: +91 79 6630 1199

URL : http://www.voltas.com/miningandconstruction/home.html

------------------------------------------------------------------- ■

Dear mr. balvinder ,

We do manufacture screens per mr. Bakers specs and we offer you a very attractive delivery time and cost for the screen required.

We have a full fledged manufacturing facility in nagpur where material handling equipments and plant layouts are designed and equipments like vibrating screens, belt conveyors, and equipments for coal washing plants are manufactured.

We request you to kindly let us know your tentative delivery schedule so that we can offer you our best equipments.

Regards

SANDEEP NAIR

DIRECTOR

ENESTEE ENGINEERING PVT.LTD.

F-6 SHRADDHA HOUSE

KINGSWAY

NAGPUR-10

07126613222/444/888

09823055527 ■