Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Jack,
Which USA or European companies claim that they are the best ?
like to hear that.
best regards ■
Teus
The Best Pneumatic Systems
"Best" is entirely subjective. If you are handling a friable product, they are all marginal. In the carbon black field, if fines are a significant issue for you, be very careful as to which system you may select. ■
Five Top Companies
It is possible to give the following list according to the reference list and the number of haulaged different products:
Govoni Sim Bianca Impianti (Italy)
Coperion Waeschle (Germany)
Zeppelin ZSA (Germany)
Neu (now out of market) (France)
Dynamic Air (USA)
Bye. ■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Jack
Ther is no best in the industry as each company has its own strength or only concentrated in a particular industry / convey phase. You can only ask what is their most experienced industry served / material conveyed.
I can only tell you the strength of our company but not the others. If you are interested, please contact me at ayu@cyclonaire.com as I am stationing in Shanghai.
There is a Powder Show in Shanghai coming June. A good place to start to find your answers.
Sincerely
Alexander Yu ■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Teus,
Almost all the companes claim they are the best, maybe it's just salesmen's advertisement . Such as clyde, zeppine, Buller, Fuler, Dynamic Air, Noltec, Clause Peter, Govoni, Neuplan, WAM, Macawber etc.
Are you familiar with these companies? Can you give some personal comments on them?
Best regartds,
Originally posted by Teus Tuinenburg
Dear Jack,
Which USA or European companies claim that they are the best ?
like to hear that.
best regards
■
Re: The Best Pneumatic Systems
Dear Tedkey,
I agree what you said.I know the carbon black is sticky and friable.It's difficult to convey.In China,the coneying system for the tire and rubble field is occupied by a local supplier-Qingdao Gaoxiao Co..(about 70% market).Many foreign suppliers can offer better technology,but their pricing is too high.
BEST REGARDS
Originally posted by tedkey
"Best" is entirely subjective. If you are handling a friable product, they are all marginal. In the carbon black field, if fines are a significant issue for you, be very careful as to which system you may select.
■
Re: Five Top Companies
Dear Carlocollareda,
Thanks for your reply.It's really helpful for me to know that.
Best Regards
Originally posted by carlocollareda@virgi
It is possible to give the following list according to the reference list and the number of haulaged different products:
Govoni Sim Bianca Impianti(Italy)
Coperion waeschle(Germany)
Zeppelin ZSA(Germany)
Neu(now out of market)(France)
Dynamic Air(USA)
Bye.
■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Alexander Yu,
I know the cyclonaire Co..In 2005 powder exhibition,i had a visit at your booth. I remember your company just began to expand china market at that time.how about your sales last year?
what's the specilized fields for Cyclonaire?
Best Regards
Originally posted by ayu
Dear Jack
Ther is no best in the industry as each company has its own strength or only concentrated in a particular ilndustry / convey phase. You can only ask what is their most experienced industry served / material conveyed.
I can only tell you the strength of our company but not the others. If you are interested, please contact me at ayu@cyclonaire.com as I am stationing in Shanghai.
There is a Powder Show in Shanghai coming June. A good place to start to find your answers.
Sincerely
Alexander Yu
■
Joe Sohu
Dear Jack,
I quite agree that your question is hard to answer.Because it depend on material,distance,particle distribution and technology,and also your process requirements.
As to say material,such as gypsum and limestone,cause it's sticky and flow ability is bad,you should have to find a profesional and experienced pneumatic company to do this job.So called dense phase also depends on capacity and particle distribution and distance.
Also like silicone sand,you should solve abrasive and wear problem for pipe and valves,dense phase and low velocity technology should be a solution;but maybe the customer need a vacuum system to suit their requirements.
Maybe the customer need to handle hundreds tonnage and more than 500 Metres long distance,you should consider solution for pipe instruments etc.
So no best company or technoly,it depends on suitable solution and what you want to focus in.There only best solution as your requirements.
Please visit www.macawber.com for densepahse and low-velocity solution as you need.
Regards,Zhouyu ■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Jack,
Your question is an important question to every potential buyer.
But the answer to your question has to be found by yourself, as nobody wants to get involved
in such a judgment ( apart from the fact that you must know them all very well, in order to be able to compare)
A way to perform your investigation could be :
-select the companies for your field of application
-contact those companies and ask them for information and/or a quotation.
-from their way of responding and the quality of their information and/or quotation, you will get the first impression.
-Then ask for references with their contact names and inform them that you will approach those references to verify their experience.
-In case of projects, becoming reality, it is advisable, when you do not have the experience yourself, to employ an engineering office or consultant, you have experience with.
-Always be alert of:
oInconsistent replies
oAttempts to seal of external information
oVague answers
oQuick conclusions, which they try to force on you.
oAnswers, implying that you have to trust them, because they are the experts (and you are not)
oBad mouthing about a competitor is not a good sign (arguments are better)
oContact sub suppliers and ask them for their opinion.
Hope for the best ■
Teus
Re: Joe Sohu
Dear Joe,
thanks for your information. I will look over your website.
Best Regards
Originally posted by Joe163
Dear Jack,
I quite agree that your question is hard to answer.Because it depend on material,distance,particle distribution and technology,and also your process requirements.
As to say material,such as gypsum and limestone,cause it's sticky and flow ability is bad,you should have to find a profesional and experienced pneumatic company to do this job.So called dense phase also depends on capacity and particle distribution and distance.
Also like silicone sand,you should solve abrasive and wear problem for pipe and valves,dense phase and low velocity technology should be a solution;but maybe the customer need a vacuum system to suit their requirements.
Maybe the customer need to handle hundreds tonnage and more than 500 Metres long distance,you should consider solution for pipe instruments etc.
So no best company or technoly,it depends on suitable solution and what you want to focus in.There only best solution as your requirements.
Please visit www.macawber.com for densepahse and low-velocity solution as you need.
Regards,Zhouyu
■
Re: Re: The Best Pneumatic Systems
[QUOTE]Originally posted by JACK1918
[B]
Dear Tedkey,
I agree what you said.I know the carbon black is sticky and friable.It's difficult to convey.In China,the coneying system for the tire and rubble field is occupied by a local supplier-Qingdao Gaoxiao Co..(about 70% market).Many foreign suppliers can offer better technology,but their pricing is too high.
BEST REGARDS
That is good to know Jack. If you will send me your direct email address, I can give you some candid comments. My email is tedkey@carbonblack.us
Regards,
Ted ■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Teus,
Your comment is very important for every buyer.THANK YOU!
Best Regards
Originally posted by Teus Tuinenburg
Dear Jack,
Your question is an important question to every potential buyer.
But the answer to your question has to be found by yourself, as nobody wants to get involved
in such a judgment ( apart from the fact that you must know them all very well, in order to be able to compare)
A way to perform your investigation could be :
-select the companies for your field of application
-contact those companies and ask them for information and/or a quotation.
-from their way of responding and the quality of their information and/or quotation, you will get the first impression.
-Then ask for references with their contact names and inform them that you will approach those references to verify their experience.
-In case of projects, becoming reality, it is advisable, when you do not have the experience yourself, to employ an engineering office or consultant, you have experience with.
-Always be alert of:
oInconsistent replies
oAttempts to seal of external information
oVague answers
oQuick conclusions, which they try to force on you.
oAnswers, implying that you have to trust them, because they are the experts (and you are not)
oBad mouthing about a competitor is not a good sign (arguments are better)
oContact sub suppliers and ask them for their opinion.
Hope for the best
■
Re: Re: Re: The Best Pneumatic Systems
Dear Tedkey,
I have sent an email to you.Please give me some comments.
Thanks&Regards
[QUOTE]Originally posted by tedkey
[B]
Originally posted by JACK1918
Dear Tedkey,
I agree what you said.I know the carbon black is sticky and friable.It's difficult to convey.In China,the coneying system for the tire and rubble field is occupied by a local supplier-Qingdao Gaoxiao Co..(about 70% market).Many foreign suppliers can offer better technology,but their pricing is too high.
BEST REGARDS
That is good to know Jack. If you will send me your direct email address, I can give you some candid comments. My email is tedkey@carbonblack.us
Regards,
Ted
■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Jack,
we are an Engineering firm in bulk materials handling system in Taiwan. So far our China office is looking for potential engineers for future jobs, please contact us ASAP if you will.
Regards,
Jeo
email address : xyz20060225@yahoo.com.tw ■
Re: Who Is The Top Five Best Company In The Pneumatic Conveying…
Dear Jatcho,
Could you tell me the name of your company.It's much better if you can give me your website.
Also,Where is your China office?
Best Regards
Originally posted by jatcho
Dear Jack,
we are an Engineering firm in bulk materials handling system in Taiwan. So far our China office is looking for potential engineers for future jobs, please contact us ASAP if you will.
Regards,
Jeo
email address : xyz20060225@yahoo.com.tw
■
Who is the top five best company in the pneumatic conveying field?
Who are the top five best company in the pneumatic conveying field?
hello, everyone!
I am an engineer from China. Glad to see this Forum.
In China, there are many pneumatic conveying system companies from USA or Europe. They all say their technology is the best in the world.
I want to ask the expert in the Forum: From your view, who are the top 5 best companies in the world? And what's your select criterion?
I know, maybe everyone will have different answers, but I hope to learn what you think. ■