Hi,

We manufacture grinding balls in Russia and export it.

Please let me know if require that.

Thanks,

Pavel

pavel@esn.spb.ru ■

when using a ball usually the yield on fine material especially when using big flint pebbles on 500 mesh is very low and for this reason the energy effeciency will rise dramatically and capacty will drop down. We could offer you an alternative solution with our agitated media mill MaxxMill, where grinding media in the size of 2 up to 9 mm are used. This machine was especially developed for the dry fine grinding below 63 micron. Experience for calcined diatomite grinding are available on request.

Stefan Gerl

stefan.gerl@eirich.de ■

February 11, 2005

Dear Sir:

Our Rotormill is capable to grind Dolomite limestone down to 300 mesh. We do not use a Ball Mill but the Rotormill. Please contact our office so that we can send our information package to you so that you can see how the Rotormill works. I believe that we can meet your specification of particle analysis and it is a continuous machine. We appreciate your interest in our equipment and we look forward to the possibility of working with you on your application.

Very truly yours,

Ronald C. Miller

President

IPEC

International Process Equipment Company

9300 Route 130 North, Pennsauken, New Jersey 08110

Phone: 856-665-4007 Fax: 856-665-3991

Email: Rotormill@aol.com



WWW.ROTORMILL.COM ■

hello ,

i am martin yang from china. now i introduce our company to you as following:

Haiying Minerals Development Co.,Ltd in Qingzhen City, Guizhou Province is a comprehensive mineral product producer integrating the development and processing of mineral products as well as mineral materials. HAIYING MINERAL PRODUCTS FACTROY ,a subsidiary enterprise of the company founded in 2003, is a specialized producer to make ceramic balls of corundumgrade aluminum oxide and high-temperature structural ceramics

Products list :

1.Wear Resistance Ceramic Ball With Middle Aluminum Content

2.Wear Resistance Ball Of Corundum.

------------Specifications : Dia. 60mm 55mm 40mm 30mm

3.--- Mill Linings With Middle Aluminum Content

4.--- Refractory Materials Aluminous Rock

6.---Refactory Brick And Clay Brick With Middle And High Content Of Aluminum

7.-- Alumina Oxide Ball

8. BAUXITE

best regards

martin yang

■

Dear Mr. Vyas,

We are an engineering team which is seeking cooperation to exploit a milling technology we have developed.

Being an expert in grinding you would therefore understand our technology's potential;

The technology we have developed is a continuous action planetary centrifugal mill,

for economical large scale ultra fine grinding of super hard materials of ceramic & mineral origin.

While in the development stage, we are providing milling services to local companies.

(We are milling quartz sands, granite pebble, metallurgical slug, glass, zirconium oxide, silica carbide & etc)

Production capacity of the prototype is 1.5 tons/hour (continuous action in open circuit)

Engine capacity of 37 kW

Our milled material is less than five microns and 30% of this material is less then one micron in size.

Surface area by BET 5.1 m2/gr! (continuous action)

Feed fraction 5mm!! -- Which means unmatched down scale factor.

Energy consumption for quartz sand for d97 is:

5 microns max .190 kWh/t

10 microns max. 135 kWh/t

20 microns max. 89 kWh/t

30 microns max. 69 kWh/t

With improvements in our inferior classifier the energy consumption would be lower.

We are not aware of a classifier which could efficiently classify large volume d100 4 micron, if we had this classifier then we would have fulfilled requirement indicators of d50 0.75 micron immediately & probably better results with some effort.



Hardness up to 10 by Moh scale,

The material is mechanically activated.

Our future project is to convert our mill from continuous action to periodic one, than we would have end product in the sub- micron range.

Our technology attracted interest among significant equipment manufacturers & we had been visited & are scheduled for more demonstrations. (I could mention Outokumpu, Netzsch, Eirich, Metso Minerals,Hosokawa Alpine)

If you would like further information on my company and our technology,

please send a short note and I will send further data for your review.

Thank you very much and hope to hear from you soon.

Ezry Akkerman

Marketing Director

Cyclotec Oy

cyclotec@gmail.com

http://www.cyclotec.net ■

Dear H. B. Vyas,

We are Jianhong New Material Co.,Ltd, one of the leading ceramics material manufacturers in Guangdong , China , established in 1986. We are specialized in Zirconium silicate (9000 tons per year), cobalt oxide (1000 tons per year), ceramic pigments (2000 tons per year), Soluble salts (2000tons per year), Aluminium balls (8000tons per year), STPP (9000 tons per year), etc. Good raw material, strictly monitor to product process, experienced and high quality technicians guarantee the high quality.

For the good quality and competitive price, our products have been well accepted by many clients from India, Vietnam, Spain, Pakistan, Malaysia, Turkey, Indonesia etc.

We would like to send sample for your reference. We hope we can establish friendly business relationship with you in the future. Please don't hesitate to contact us should you need more information. Looking forward to hearing from you soon.

Best Regards

Jianhong New Material Co., Ltd

Add: Room 602,Building 4, 33# JinYuan Street, Century Garden, Foshan, P.R. China.

Tel: 0086 757 8801 3631

Fax: 0086 757 83305130

E-mail: Lancyxiaor@yahoo.com.cn lancyxiaor@gmail.com

Website: www.jianhong-chem.cn ■

Do you have any interest to attempt to some different kind of grinidng media ?

Our grinding balls are different from the common forged steel balls and casting iron balls. Our balls are made of the lastest hot rolled technique and advanced on-line heat-treatment lines.

Our balls have the following advantages:

1. High uniform hardness: HRC 55-65 from surface to core

2. High fracture toughness: no less than 12J/cm2

3. Low breakage rate: much less than 1% and almost there is no breakage during regular iperation

4. Permanenet shape: Because of the uniform hardness and precious dimension, our balls won't be out of circularity from start until finish.

Thru those, maybe you could have a clean sketch of our balls. If you have any other questions and interests, please browse our website www.zgffty.com or contact me directly . We do not only care for the business, we could communicate more in this line to promote ourselves. ■

Hi, we have high alumina ball for ball mill grinding media, in case you need, pls contact us, thanks.

Category:Business Materials / Industries

Site Title:Alumina Grinding Ball, Ceramic Ball for ball mill grinding media and tower packing.

URL:http://www.alumina-ball.com/

Descriptiom:HuaMing Alumina China is one manufacturer and exporter of alumina ball including alumina grinding ball, ceramic ball, high alumina ball, medium alumina ball, inert alumina ball for ball mill grinding media and chemical tower packing, catalyst bed support.

Keywords:alumina grinding ball, ceramic ball, ball mill grinding media, alumina ceramic ball, high alumina ball, inert alumina ball, catalyst bed support, tower packing.

Reciprocal:http://www.alumina-ball.com/friendly-links.html

E-mail:webmaster@alumina-ball.com ■

A grinding mill is a unit operation designed to break a solid material into smaller pieces. There are many types of grinding mills and many types of materials processed in the grinding mills. Mills were powered by hand (mortar and pestle), working animal, wind (windmill) or water (watermill) historically. Today they are also and more often powered by electricity.

A typical type of fine grinder is the ball mill grinder. A slightly inclined or horizontal rotating cylinder which makes up the ball mill grinder body is partially filled with steel balls, usually stone or metal, which grinds material to the necessary fineness by friction and impact with the tumbling balls with the rotation of the ball mill grinder. Ball mill grindings are characterized by their smaller (comparatively) diameter and longer length. The feed is at one end of the ball mill grinding cylinder and the discharge is at the other end of the ball mills grinder. Ball mill grinders are commonly used in the manufacture of Portland cement. These industrial ball mill grindings are mainly big machines. Small versions of ball mill grinders can be found in laboratories where they are used for grinding sample material for quality assurance.

Ball mill grinding may serve the following purposes in engineering: 1. Increase of the surface area of a solid. 2. Manufacturing of a solid with a desired grain size. 3. Pulping of resources. ■

Henan Bailing Machinery Co.,Ltd. is a modern enterprise specialized in manufacturing mining-equipment which is integrated with research, production, and marketing of the mining equipments. The headquarter is located at the HI-TECH industrial development zone in Zhengzhou, covering above 28 thousand square meters. For the time being, Bailing Machinery has passed the authoritative certificates such as ISO9001:2008 and CCC authentication(China Compulsory Product Certification). We are also honored as "contract-abiding and trustworthy" enterprise of Henan province. And the enterprise has followed the scientific management method of modern enterprises, producing equipments with meticulous care and endless innovation, in this way, it has rapidly developed and become an outstanding enterprise in the mechanical industry in China.

Henan Bailing Machinery Co.,Ltd. is committed to designing, producing grinding mills( ball mill,ball mills,ball mill machine,ball mill equipment, crushers, conveyors, feeding machines, drying and calcinating as well as beneficiation equipments and etc, which are widely applied in electricity, metallurgy, mine and quarry, wharf, granary, chemical industry. Our products have been spreaded all over China, and also exported to European, American, Asian, African countries and enjoyed great popularity among our customers.

Our company owns an experienced and skilled sales and service team which compose a perfect service network. We will send the professional engineers to the installation sites and provide guidance for the installation, commissioning and initial run as well as planning administration of the equipments after purchase.

All the staff are improving the study ability of whole team with full passion, fresh vitality, and diligency. We are striving to be the strong, professional, and best enterprise with "high-quality, best service, good faith" and aim at being the first-class mining equipment enterprise in domestic with advanced international standard. We warmly invite customers all over the world to visit our factory, guide our work, and cooperate with us. ■

Wear resistant ceramic lining – Alumina, zirconia & ZTA

Ceramic grinding media – alumina & zirconia

Steel & rubber backed ceramic plate

Pulley lagging

https://aluminaceramics.wordpress.com/ ■