Antworten
Grinding Solution
Erstellt am
24. Jan. 2008 - 08:03
We are in need of grinding machinery for the following application:
Feed: Iron Ore
Bulk Density: 2.5-2.9 t/cum
Moh’s scale hardness: 5 to 6
Tumbler Index: 83-86%
Abrasion Index: 6.5-7
Bond Index: 5% max
Compressive Strength: 3600 kgs/sq cm
Feed size: 0-5mm
Moisture in feed material: 15-20%
Output size: 80% passing 0.075 (75 microns)
Feed Capacity: 40-50tph
The feed material will be coming from the cyclones and the ultra-fines at the output will be sent to again to cyclones for further separation.
I see from web that your have developed some new technologies
Please send me all technical details and production capacities. Also Pictures and dimensions ■
Ultra fine grinding innovation from Cyclotec Oy
We are an engineering team seeking cooperation to exploit a milling technology we have developed.
Being experts you would therefore understand our technology's potential;
The technology we have developed is for a continuous action planetary centrifugal mill,
for ultra fine grinding.
While in the development stage, we are providing milling services to local companies.
(we are milling quartz sands, granite pebble, metallurgical slug, glass, etc)
Production capacity of the prototype is 1.5 tons/hour (continuous action in open circuit )
Engine capacity of 37 kW
Our milled material is less than five microns and 30% of this material is one micron in size.
Surface area by BET 5.1 m2/gr ! (continuous action)
Feed fraction 5mm
Energy consumption is 200 Kw/ton max.
Depending on the material ( on quartz sands consumption is less then 140 kW/ton d97 for 10 microns).
Hardness up to 10 by Moh scale,
The material is mechanically activated .
If you would like further information on my company and our technology,
please send a short note and I will send further data for your
review.
Thank you very much and hope to hear from you soon.
Ezry Akkerman
Marketing Director
Cyclotec Oy
cyclotec@gmail.com
http://www.cyclotec.net ■