Re: Suction Conveyor For Wood Chip
We can design the pneumatic conveying system for you and you can then use any vendor you like, or use vendors whom we will suggest. This should be a better approach than having a vendor supply you equipment as well as basic design.
A. T. Agarwal
Pneumatic Conveying Consultants
polypcc@aol.com
www.powderandbulk.com/pcc ■
Pneumatic Conveying
Thank you for your answer. We are at very begining at our project and we are looking for partners to co-operate with us.
We are planning a new type of vessel for carryinf wood chip all year round and for that purpose we need a new kind of loading and unloading system. Our idea was that it might be pneumatic, but from here we were not able to find any co-operative partners. Our aim is year 2010 and by then we are hoping to have a fleet of vessels ready to operate on our inlandwaterways.
Best Regards
Antero Pulkkanen
project manager
tel + 358 5 535 4198, mob + 358 400 550 823
e-mail pulkkanen@vesitiet.org
www.vesitiet.org and www.thousand-lakes-canals.fi ■
Re: Suction Conveyor For Wood Chip
Hello,
Since I have not been here for some time I could not respond to your mail earlier.
We are a research and development centre located in Norway and dealing with problems and challenges related to Powder Technology. Our main focus has always been soloving problems of the industry. Our major areas of expertise include Pneumatic transport of bulk materials.
We will be glad to be of assistance to you.
with best regards ■
Pneumatic Conveying
Originally posted by biplab K. Datta
Hello,
Since I have not been here for some time I could not respond to your mail earlier.
We are a research and development centre located in Norway and dealing with problems and challenges related to Powder Technology. Our main focus has always been soloving problems of the industry. Our major areas of expertise include Pneumatic transport of bulk materials.
We will be glad to be of assistance to you.
with best regards
Thank you for your answer
We are at very start at our project and Masa-Yards is desiging a new kind of vessel to uor project and now we need a lay out of a system so that the vessel is ablle to load and unload the wood cut at least 1000 kubicmeters/h. We have been thinking that pneumatic system would be very suitable. We have power 2000 kW for to use for the loading operation.
Waiting for your answer.
Best regards
Antero Pulkkanen
e-mail pulkkanen@vesitiet.org ■
Suction conveyor for wood chip
We need a suction conveyor for wood chip. Capacity 1000 m3/h and the distance of loading mus be 120 - 150 meters. We have 2000 kW power capacity to use. The same mazine must be suitable also for unloading. ■