Brakes Mfgrs
Dear Mr. Singh,
reputable mfgrs of controlled brake systems are, to my experience: Svendborg AB of Denmark, KTR of Germany, Johnson of Canada, Custom FluidPower of AUS. There is more.
There is a whole lot of suppliers for non controlled brakes, however for an overland, w/o more information, you could very well approach above suppliers or else search for suppliers in your vicinity and discuss your specific requirements in detail.
Disclaimer: No relation to abovementioned companies.
Regards
R. ■
Use Of Project Photograph - Plagerism
We are searching for Reliable Manufacturers for Disc brake for overland conveyor application . Caliper shall be Spring Applied and Hydraulically released .
A R Singh
===============================================
Dear Mr. Singh,
It is customary to cite the source of information when using other party technologies, photographs, methods, et. al.
The photograph you used above is not from any project you have been involved with, or tell me I am wrong. It seems to be taken from a Conveyor Dynamics, Inc. (CDI) project in Brazil and cited on our website.
Your present use implies, this is a project you have been affiliated with. Please correct me or correct the use of this photo. ■
Disc Brake For Overland Conveyor
Dear Larry,
Mea culpa ... I added the photo and did not give proper acknowledgement. Most forum contributions do not include a photo. But our new layout somehow depends on photos, or the front page will be full of blank spaces.
When I started this procedure, I did not add the sentence: Added by Moderator which I now do. I am not sure if this photo is by Conveyor Dynamics, Inc. (CDI). But I added a CDI photo today, and this was before I read your present post, and I believe I correctly gave the source, see here: https://forum.bulk-online.com/showthread.php?3386.
I would be happy if forum posters would add photos to their posts, so that I do not have to look for a suitable one (which is seldom correct).
I thank you for your continuous support of this forum and website, and I wish you all the best for 2015 and beyond, and that we may meet again in good health!
Your old friends
Ute and Reinhard Wohlbier
■
Mea Culpa
Mea culpa ... I added the photo and did not give proper acknowledgement. Most forum contributions do not include a photo. But our new layout somehow depends on photos, or the front page will be full of blank spaces.
When I started this procedure, I did not add the sentence: Added by Moderator which I now do. I am not sure if this photo is by Conveyor Dynamics, Inc. (CDI). But I added a CDI photo today, and this was before I read your present post, and I believe I correctly gave the source: see here: https://forum.bulk-online.com/showthread.php?3386.
I would be happy if forum posters would add photos to their posts, so that I do not have to look for a suitable one (which is seldom correct).
I thank you for your continuous support of this forum and website, and I wish you all the best for 2015 and beyond, and that we may meet again in good health!
Your old friends
Ute and Reinhard Wohlbier
Attachment 42670
============================================================================
I wish you and Ute the best for 2015 and beyond.
Your old friend & Semi-retired, with thanks for all the past support. Hope to keep contributing to the forum and can offer some additional photos.
Please advise taking and add placement for ROCKY DEM.
Lawrence Nordell ■
Sibre Brakes India
Dear Sir,
We are having range of Disc Brake,Caliper Brakes spring applied and hydraulical release,
With Regards
R.Saravanan
Email: rsaravanan@sibre.in
We are searching for Reliable Manufacturers for Disc brake for overland conveyor application . Caliper shall be Spring Applied and Hydraulically released .
A R Singh
Added by Moderator:
■
Disc Brake for Overland Conveyor
Dear Sir
We are searching for Reliable Manufacturers for Disc brake for overland conveyor application . Caliper shall be Spring Applied and Hydraulically released .
A R Singh
Added by Moderator:
Overland Conveyor by Conveyor Dynamics Co. ■