POWTECH 2014: Hense Wägetechnik GmbH

hense_logo

Powtech 2014:

Messe-Highlights der Hense Wägetechnik GmbH

Hense Wägetechnik is specialized in weighing solutions for bulk storage and conveying.

On their Powtech stand Hense exhibits load cells with loading assemblies for tanks, silos and mixer. With their range of temperature compensated strain gauge sensors Hense offers alternative solutions to retrofit existing silos with maintenance free inventory control based on weight information.


hense_int-kl-aw-am_silo_1

(double click on picture to open in new window)

The new „intelligent Junction Box



The new „intelligent Junction Box“ monitors all important functions of the load cells. Every load cell signal is compared to the average - the CAN -bus transmits the weight information up to 250 m to the evaluation electronic. The intelligent junction box provides free adjustable alarm for cable brake, over- and underload and uneven load deviation.

Precise and maintenance free solid flow measurement is another important field of Hense Wägetechnik. They offer all kind of belt scales, weigh feeder, weighing screw conveyor and precise solid flow meter for gravimetric flow (free falling) and pneumatic conveyed powder and grain material.

The new MIC Smart Sensor is now available as a low cost Flow / noFlow detector.


hense_mic_smart_sensor_2

(double click on picture to open in new window)

The new MIC Smart Sensor

hense_mic_transdurcer_software_3

(double click on picture to open in new window)

Diagram of the software provided with the MIC-Transducer



A comfortable software for monitoring and adjustment of the flow limits is provided with the MIC- transducer. The sensor is connected via a mini - USB connector.

A further „Highlight“ on the the Hense Wägetechnik Powtech stand is the new “FlowCube” meter. The FlowCube offers a low cost solution for bulk density and flow measurement of powder and grain material. The dust tight, compact instrument starts with a “self calibration” cycle to analyse the bulk density. The second cycle acts as reference calibration to calculate the flow rate. The density and the flow calibration take only a few seconds time. After the first calibration the flow is measured continuously as result of the weight to flow relation.

The electronic detects differences in the material properties - if the difference exceeds a certain limit, the system reacts with a new reference calibration.

The density measurement can be repeated in adjustable cycles.


hense_fcube_drawing_4

(double click on picture to open in new window)

The FlowCube System



The FlowCube System is very cost effective compared to other solid flow meter.

Hense Wägetechnik GmbH offers individual customer consultation and supports their customers with telephone assistance and test installations.

Visit Hense Wägetechnik in Hall 1 at Stand 238.

For more information, please vist:

https://edir.bulk-online.com/profile...getechnik.htm

GoogleSearch:

http://www.google.com/search?client=...ulk-online.com

http://www.google.com/search?q=Hense...=lnms&tbm=isch

Keywords:

Wägezellen, Load Cells, Bandwaagen, Dosierbandwaage, Belt Scales, Weight Feeder, Weighing Systems, Wägetechnik, Schüttgutmessung, Schüttstrommessung, Flow Meter, Solid Flow Meter, Weighing Screw Conveyor, Wiegeschnecke, Prallplattenwaage, Impact Weigher, Wiegen, Durchsatz messen, Weighing, Bulk Density Measurement, Schüttgut Dichtemessung, Füllstandsmessung, Level Measurement, Waage, Scales

Hense Wägetechnik GmbH on the Portal:

https://www.bulk-online.com/search?q=hense

Write the first Reply