I am pleased to invite you to attend this MEGA EVENT in the area of POWDER, GRANULE and BULK SOLIDS to be organized on November 28-30, 2013 at Thapar University, Patiala, India.
The Conference will cover various fundamental and applied aspects of Particle Technology (from Research to Industry) - Integrating Academic and Industry Communities.
Here is the final Technical Program:
PGBSIA 2013:
SCHEDULE OF TECHNICAL PROGRAM
DAY 1
INVITED EXPERT LECTURES
Advances in bulk material handling technology – linking research and industry
Peter Wypych, University of Wollongong, Australia
Control of dust in particulate process industries
C.R. Copeland and S. Komar Kawatra, Michigan Technological University, USA
SESSION 1A1:
BULK SOLIDS HANDLING AND PROCESSING
An investigation into friction forces of particulate plugs moving in vertical and horizontal pipes
Semion Shaul and Haim Kalman, Ben-Gurion University of the Negev, Israel
Local mean velocity measurement of pneumatically conveyed particles using electrostatic sensor arrays and cross-correlation method
Shengnan Wang, Chuanlong Xu, Shimin Wang and Yuezhu Wu, Southeast University, Nanjing University, Nanjing, China
A comparative study on gravity-induced flow and forced flow of pulverized coal
Haifeng Lu, Xiaolei Guo, Fuyu Wu, Xiaolin Sun, Kai Liu and Xin Gong, Shanghai Engineering Research Centre of Coal Gasification, Institute of Clean Coal Technology, East China University of Science and Technology, China
Vibrological effects in rapid gravity flows of particulate solids on a rough chute
Viktor N. Dolgunin, Andrew N. Kudy, Pavel A. Ivanov, Oleg O. Ivanov, Anatoliy M. Klimov and Vasiliy A. Pronin, Tambov State Technical University, Tambov, Russian Federation
Combustible Dust Explosion Risk Management
Felipe Ong, BS&B Safety Systems, Singapore
SESSION 1A2:
BULK SOLIDS HANDLING AND PROCESSING
WORKSHOP:
Design, case-studies and troubleshooting of dense-phase pneumatic conveying systems
Peter Wypych and S.S.Mallick,University of Wollongong, Australia and Thapar University, India
SESSION 1A3:
BULK SOLIDS HANDLING IN THERMAL POWER PLANTS
Practical issues of coal handling plant operation in a thermal power plants
I.K.Rajdeva, National Thermal Power Corporation (NTPC), India
Latest developments in ash handling systems in Indian power plants
Tirupati Rao, Bharat Heavy Electricals Limited (BHEL), Bangalore, India
Advances in pneumatic, slurry conveying within industry
Sumantra Sen, Tecpro Systems Limited, Kolkata, India
Present day scenario of handling bottom ash
Debashish De, Development Consultants Private Limited, Kolkata, India
SESSION 1B1:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
IR spectrum of the wet very fine particulate material
Tomas Sverak, Christopher G. J. Baker and Katerina Sikorova, Brno University of Technology, Czech Republic
tudy of wettability and surface energy characteristics of nano-coated pharmaceutical excipient powders
Vikram Karde and Chinmay Ghoroi, Indian Institute of Technology, Gandhinagar, India
A Scientific approach to evaluate normal class room chalk and imported dustless chalk: an application of instrumentation and control engineering
Manish Thakker, Dinesh O.Shah, Premal Shukla, Dharmsinh Desai University, India, University of Florida, USA
Influence of pH on the stability of alumina and silica nanosuspensions produced by stirred media milling
Chetan M. Patel, Mousumi Chakraborty and Z. V. P. Murthy, National Institute of Technology, Surat, India
Control of nanoparticle agglomeration: role of synthesis technique and surfactant
Chandni Khurana, O.P Pandey and Bhupendra Chudasama, Thapar University, India
SESSION 1B2:
PARTICLE MECHANICS AND SIMULATION
Discrete element modeling of grain flow pattern in continuous cross-flow grain dryer
R. P. Kingsly Ambrose, Josephine M. Boac and Dirk Maier, Kansas State University, U.S.A
Effect of elliptical particles orientation on macro and micromechanical behaviour during direct shear test
Ali Asghar Mirghasemi and Morteza Naeij, University of Tehran, Iran
Modeling of nano-suspension droplet drying by CFD-DEM approach
Y.Ostrovski, A. Levy, Ben-Gurion University of the Negev, Israel
A study of CFD modelling on variation of solid fraction in a batch fluidized bed
G Srinivas and Y Pydi Setty, National Institute of Technology, Warangal, India
ASPEN Plus simulation and experimental study of different dry biomass solid waste gasification process using air–steam fluidized bed gasifier
R. Tripathy and A. Sahoo, National Institute of Technology, Rourkela, India
SESSION 1C1:
FLUIDIZATION AND GRANULAR FLOW
The porosity distribution in monodisperse and polydisperse fixed beds and its impact on the fluid flow
Sebastian Schulze, Petr A. Nikrityuk, Bernd Meyer, Institute of Energy Process Engineering and Chemical Engineering, Germany
Material Behaviour of Spherical Elastic-Plastic Granules at Diametrical Compression
Alexander Russell, Peter Müller and Jürgen Tomas, Otto von Guericke University of Magdeburg, Germany
Droplet spreading on micro-patterned and micro-porous granular beds
Ananth Praveen Kumar, Venkatanarayana Prasad S, Tamal Banerjee and Dipankar Bandyopadhyay, Indian Institute of Technology, Guwahati, India
Droplet spreading on micro-patterned and micro-porous granular beds
Ananth Praveen Kumar, Venkatanarayana Prasad S, Tamal Banerjee and Dipankar Bandyopadhyay, Indian Institute of Technology, Guwahati, India
Study of the dynamics of wet granulates under shear
Jayati Sarkar and Dheerendra Dubey, Indian Institute of Technology, Delhi, India
SESSION 1C2:
APPLICATIONS OF PARTICLE TECHNOLOGY
Oil agglomeration of coal fines in continuous Mode of Operation
Ankush Gupta, H.V.C. Chary Guntupalli, M.G. Dastidar, Indian Institute of Technology, Delhi, Central Pollution Control Board, Delhi, India
A comparative study on physico-chemical characteristics and synthesis of typical nanofluids
Ajay Vasishth, K.S.R. Murthy and Gagan Anand, University of Petroleum and Energy Studies, Dehradun, India
Optimization of the deposition parameters of DLC coatings with the IC-PECVD method
T.P.Singh and Vijay Kumar S. Jatti, Symbiosis Institute of Technology, Pune, India
Particle deposition of diamond-like-carbon on silicon wafers using inductively coupled PECVD
Vijay Kumar S.Jatti, T.P.Singh and Ravi Sekhar, Symbiosis Institute of Technology, Pune, India
Improving lubrication of EDM oil at higher shear rate and temperature with carbon nanotubes
Balram Tripathi and B. Ravindra and Y.M. Joshi, S S Jain Subodh (PG) College Jaipur, Indian Institute of Technology, Jodhpur, India, Indian Institute of Technology, Kanpur, India
SESSION 1C3:
APPLICATIONS OF PARTICLE TECHNOLOGY
WORKSHOP:
Application of powder technology to detection of fingerprints on crime scene evidence
G.S. Sodhi, S.G.T.B. Khalsa College, Delhi, India
WORKSHOP:
Nanoparticle synthesis, characterization, engineering applications: present challenges and future developments
Coordinators: Dr. Bonamali Pal and Dr. Bhupinder Chudasama, Thapar University, India (in collaboration with subject experts
DAY 2
INVITED EXPERT LECTURES
Recent advances in long distance belt conveyors
Gabriel Lodewijks, Delft University of Technology, Netherlands
Using threshold velocities to determine flow regime maps for pneumatic conveying
Haim Kalman, Ben-Gurion University of the Negev, Israel
Discrete element simulation of granular and multiphase flows
Navid Mostoufi, University of Tehran, Iran
Modelling milling processes
Avy Levy, Ben-Gurion University of the Negev, Israel
Imaging applied to particles and particles Systems characterization: fundamentals
Giuseppe Bonifazi and Silvia Serranti, University of Rome, Italy
Nucleophile induced reversible dissolution of metal in aqueous surfactant solution: an astounding conclusion
Tarasankar Pal, Indian Institute of Technology, Kharagpur, India
SESSION 2A1:
BULK SOLIDS HANDLING AND PROCESSING
WORKSHOP:
Conveyor dynamics
Gabriel Lodewijks, Delft University of Technology, Netherlands
Session 2A2:
Bulk Solids Handling and Processing
WORKSHOP:
Bulk material storage facilities – design and management considerations
Peter Wypych, University of Wollongong, Australia
SESSION 2B1:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
Chemical imaging applied to particles and particles Systems characterization: case studies
Giuseppe Bonifazi and Silvia Serranti, University of Rome, Italy
Facile synthesis of anisotropic Au nanostructures by laser irradiation and study their optical and electro-kinetic properties
Bonamali Pal and Rupinder Kaur, Thapar University, India
Magnetic properties of nano-structured Co and Ni synthesized by modified NaBH4 reduction route
Shankar B. Dalavi and Rabi N. Panda, BITS Pilani, Goa, India
Effect of processing variables on WC nanoparticles synthesized by solvothermal route
Gourav Singla, K. Singh and O. P. Pandey, Thapar University, India
A simple aqueous solution based chemical methodology for preparation of mesoporous alumina: efficient adsorbent for defluoridation of water
Desagani Dayananda, Venkateswara Rao Sarva, Sivankutty Vadakkethonippurathu Prasad, Jayaraman Arunachalam, Narendra Nath Ghosh, BITS Pilani, Goa, Bhabha Atomic Research Centre, Hyderabad, India, National Institute for Interdisciplinary Science and Technology (NIIST-CSIR), Kerala, India
SESSION 2B2:
PARTICLE MECHANICS AND SIMULATION
Effect of dune formation on pressure drop in horizontal pneumatic conveying system
Ajay B. Makwana, Ramjee Korada and Manaswita Bose, Indian Institute of Technology, Bombay, India
An investigation on flow pattern and velocity fields in a two dimensional flat bottomed rectangular silo with central and off-centre discharge
Sanjay K. Sardar, Ritwik Maiti, Prasanta K. Das and Gargi Das, Indian Institute of Technology, Kharagpur, India
CFD simulation for hydrodynamic behaviour of fine particles in a fluidized bed
P. Sahoo and A. Sahoo, National Institute of Technology, Rourkela, India
CFD analysis of hydrodynamic behavior in FC crystallizer
Anis Bakhsh and H. M. Jena, National Institute of Technology, Rourkela, India
Numerical simulation of solid liquid two-phase flow behavior in centrifugal slurry Pump
Satish Kumar, Thapar University, India
SESSION 2C1:
FLUIDIZATION AND GRANULAR FLOW
Optimizing granulating fluid levels in high shear wet granulation using wet mass rheology
S. Arelly, S. Priyadarshini, A. Haque, H. Verma, R. Gandhi*, K. Venkatesh, Dr. Reddy's Laboratories Ltd.
Pressure drop and gas holdup studies in a spout-fluid bed
Sujan Kumar B and Venu Vinod A, National Institute of Technology, Warangal, India
Effects of physical and mechanical properties on fluidized bed drying of rajma seed
S. Jena and A. Sahoo, National Institute of Technology, Rourkela, India
Studies on parameter optimization for particle growth in a fluidized bed granulator: interval halving method
Abanti Sahoo and Lisa Sahoo, National Institute of Technology, Rourkela, India
Segregation in horizontally shaken binary granular mixtures in Christmas-tree channel
Ashish Bhateja, Ishan Sharma and Jayant K Singh, Indian Institute of Technology, Kanpur, India
SESSION 2C2:
APPLICATIONS OF PARTICLE TECHNOLOGY
Hot deformation behaviour of Aluminium composite produced through powder metallurgy route
A. Rajeshkannan, University of the South Pacific, Laucala Campus, Fiji
A novel multipurpose powder/small particle composition for detection of fingerprints on a legion of crime scenes
G.S. Sodhi and Jasjeet Kaur, S.G.T.B. Khalsa College, Shaheed Rajguru College of Applied Sciences for Women, Delhi, India
Sol gel derived hierarchially porous granular ceramics and aerogels for multifunctional applications
Linsha Vazayal, K.V. Mahesh and S. Ananthakumar, National Institute for Interdisciplinary Science and Technology, Kerala, India
AC and DC conductivity studies on lead free ceramics:Sr1-xCaxBi4Ti4O15(x=0, 0.2 to 0.8)
Gagan Anand, Ajay Vasishth, Piyush Kuchhal and P. Sarah, University of Petroleum and Energy Studies, Dehradun, India
Development of closed-cell aluminum composite foams
Suresh Kumar, Ranvir Singh Panwar and O. P. Pandey, Thapar University, India
DAY 3
INVITED EXPERT LECTURES
Some fundamental aspects of the rheology of dense granular materials
Prabhu R. Nott, Indian Institute of Science, Bangalore, India
Re-interpretation of fluidization
Xianfeng Fan, University of Edinburgh, UK
Energy saving pneumatic conveying of bulk solids
Arika Rinoshika, Yamagata University, Japan
The significant parameter for the production of nanoparticles by stirred media milling
B. Pitchumani, Institute of Technology, New Delhi, India
Modelling dense-phase pneumatic conveying of bulk solids
Chandana Ratnayake, Tel-Tek Institute, Norway
Recent advances in pipe conveyor technology
Renhu Pan, Fujian Longking Company, China
SESSION 3A1:
BULK SOLIDS HANDLING AND PROCESSING
WORKSHOP:
Ash handling systems in thermal power plants
Renhu Pan, Fujian Longking Company, China
SESSION 3A2: BULK SOLIDS HANDLING AND PROCESSING
Understanding powder caking as a consequence of a range of mechanisms by means of powder rheometry
Tim Freeman, Nishil Malde and Yogin Chandorkar, Freeman Technology, UK and Aimil India
Coal blending for Indian power plants –a case study
Dipta Sundar Mallick, Development Consultants Private Limited, Kolkata, India
Bulk hydraulic disposal of fly ash slurry at high solids concentrations
P. K. Senapati and B. K. Mishra, CSIR-IIMT, Bhubaneswar
Blinded T-bends flow patterns in pneumatic conveying systems
Nir Santo and Haim Kalman, Ben-Gurion University of the Negev, Israel
Powder consolidation – why it is a problem and how to solve it
Nilay Shah, Brookfield Engineering USA
SESSION 3B1:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
Enhanced stability, conductance and catalytic activity of gold nanoparticles via oxidative dissolution by KMnO4
Anila Monga and Bonamali Pa, Thapar University, India
Effect of pH on synthesis of single phase Titania (TiO2) nanoparticles and its characterization
G. Sarala Devi K. Shanth Kumar, Indian Institute of Chemical Technology, Hyderabad, India
Processing and characterization of plasma spray coatings of glass micro-spheres premixed with Al2O3 particles
Gaurav Gupta and Alok Satapathy, National Institute of Technology, Rourkela, India
Morphological study of carbon nanoparticles synthesized at high temperature and pressure
Mani Mahajan, K. Singh and O. P. Pandey, Thapar University, India
SESSION 3B2:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
Effect of thermal treatment on morphology and photocatalytic activity of fe-impregnated sodium titanate nanotubes
Inderpreet S. Grover, Satnam Singh and Bonamali Pal, Thapar University, India
Photocatalytic degradation of Janus Green B using TiO2 nanoparticles synthesized by sol gel method
Pooja Singla, Manoj Sharma, O.P. Pandey and K. Singh, Sri Guru Granth Sahib World University, Thapar University, India
Development of gypsum powder admixture for exterior wall plaster
Sudhir K. Singh, Thapar University, Patiala, India
SESSION 3C1:
APPLICATIONS OF PARTICLE TECHNOLOGY
Improvement of aerated discharge rate of cohesive powders by nano-coating
Sanat Chandra Maiti, Vikram Karde and Chinmay Ghoroi, Indian Institute of Technology, Gandhinagar, India
Experimental investigation of magnetic field assisted EDM with powders mixed in dielectric
Geeta Bhatt, Ajay Batish, Anirban Bhattacharya, Thapar University, India
Epoxy composites filled with micro-sized AlN particles for microelectronic applications
Alok Agrawal, Alok Satapathy, National Institute of Technology, Rourkela, India
Study of broken glass granules to find cause of failure of windshield automobiles glass
Bhupinder Kaur and O.P. Pandey, Thapar University, India
Mineralogical studies of fly ash that acts as a soil ameliorant in agriculture
Rajinder Kaur and Dinesh Goyal, Thapar University, India
SESSION 3C2:
APPLICATIONS OF PARTICLE TECHNOLOGY
High sensitivity and selective response of ZnO: Nb2O5 nanocomposite based hydrogen gas sensor
G.Sarala Devi, P. Siva Prasad Reddy and K. Ramya, Indian Institute of Chemical Technology, Hyderabad, India
Development of plasma spray coatings using Linz-Donawitz (LD) slag particles
Pravat Ranjan Pati and Alok Satapathy, National Institute of Technology, Rourkela, India
Powder mixed dielectric: an approach for improved process performance in EDM
Ajay Batish, Anirban Bhattacharya and Naveen Kumar, Thapar University, India
Effect of different ceramic particle on the sliding wear behavior of Al-Si alloy composites
Ranvir Singh Panwar, Suresh Kumar, O.P. Pandey, Thapar University, India
Effect of vortex finder diameter on flow field and collection efficiency of cyclone separators
L.S. Brar, R.P. Sharma and R. Dwivedi, BIT Mesra, Ranchi
You find the complete Program as PDF in the attachment below.
PGBSIA 2013: Final Program
PGBSIA 2013:
International Conference on Powder, Granule and Bulk Solids:
Innovations and Applications
Venue: Thapar University, Patiala, India
Dates: November 28-30, 2013
Conference Website: http://www.pgbsia2013.comwww.pgbsia2013.com
Dear Sir/Madam
I am pleased to invite you to attend this MEGA EVENT in the area of POWDER, GRANULE and BULK SOLIDS to be organized on November 28-30, 2013 at Thapar University, Patiala, India.
The Conference will cover various fundamental and applied aspects of Particle Technology (from Research to Industry) - Integrating Academic and Industry Communities.
Here is the final Technical Program:
SCHEDULE OF TECHNICAL PROGRAM
DAY 1
INVITED EXPERT LECTURES
Advances in bulk material handling technology – linking research and industry
Peter Wypych, University of Wollongong, Australia
Control of dust in particulate process industries
C.R. Copeland and S. Komar Kawatra, Michigan Technological University, USA
SESSION 1A1:
BULK SOLIDS HANDLING AND PROCESSING
An investigation into friction forces of particulate plugs moving in vertical and horizontal pipes
Semion Shaul and Haim Kalman, Ben-Gurion University of the Negev, Israel
Local mean velocity measurement of pneumatically conveyed particles using electrostatic sensor arrays and cross-correlation method
Shengnan Wang, Chuanlong Xu, Shimin Wang and Yuezhu Wu, Southeast University, Nanjing University, Nanjing, China
A comparative study on gravity-induced flow and forced flow of pulverized coal
Haifeng Lu, Xiaolei Guo, Fuyu Wu, Xiaolin Sun, Kai Liu and Xin Gong, Shanghai Engineering Research Centre of Coal Gasification, Institute of Clean Coal Technology, East China University of Science and Technology, China
Vibrological effects in rapid gravity flows of particulate solids on a rough chute
Viktor N. Dolgunin, Andrew N. Kudy, Pavel A. Ivanov, Oleg O. Ivanov, Anatoliy M. Klimov and Vasiliy A. Pronin, Tambov State Technical University, Tambov, Russian Federation
Combustible Dust Explosion Risk Management
Felipe Ong, BS&B Safety Systems, Singapore
SESSION 1A2:
BULK SOLIDS HANDLING AND PROCESSING
WORKSHOP:
Design, case-studies and troubleshooting of dense-phase pneumatic conveying systems
Peter Wypych and S.S.Mallick,University of Wollongong, Australia and Thapar University, India
SESSION 1A3:
BULK SOLIDS HANDLING IN THERMAL POWER PLANTS
Practical issues of coal handling plant operation in a thermal power plants
I.K.Rajdeva, National Thermal Power Corporation (NTPC), India
Latest developments in ash handling systems in Indian power plants
Tirupati Rao, Bharat Heavy Electricals Limited (BHEL), Bangalore, India
Advances in pneumatic, slurry conveying within industry
Sumantra Sen, Tecpro Systems Limited, Kolkata, India
Present day scenario of handling bottom ash
Debashish De, Development Consultants Private Limited, Kolkata, India
SESSION 1B1:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
IR spectrum of the wet very fine particulate material
Tomas Sverak, Christopher G. J. Baker and Katerina Sikorova, Brno University of Technology, Czech Republic
tudy of wettability and surface energy characteristics of nano-coated pharmaceutical excipient powders
Vikram Karde and Chinmay Ghoroi, Indian Institute of Technology, Gandhinagar, India
A Scientific approach to evaluate normal class room chalk and imported dustless chalk: an application of instrumentation and control engineering
Manish Thakker, Dinesh O.Shah, Premal Shukla, Dharmsinh Desai University, India, University of Florida, USA
Influence of pH on the stability of alumina and silica nanosuspensions produced by stirred media milling
Chetan M. Patel, Mousumi Chakraborty and Z. V. P. Murthy, National Institute of Technology, Surat, India
Control of nanoparticle agglomeration: role of synthesis technique and surfactant
Chandni Khurana, O.P Pandey and Bhupendra Chudasama, Thapar University, India
SESSION 1B2:
PARTICLE MECHANICS AND SIMULATION
Discrete element modeling of grain flow pattern in continuous cross-flow grain dryer
R. P. Kingsly Ambrose, Josephine M. Boac and Dirk Maier, Kansas State University, U.S.A
Effect of elliptical particles orientation on macro and micromechanical behaviour during direct shear test
Ali Asghar Mirghasemi and Morteza Naeij, University of Tehran, Iran
Modeling of nano-suspension droplet drying by CFD-DEM approach
Y.Ostrovski, A. Levy, Ben-Gurion University of the Negev, Israel
A study of CFD modelling on variation of solid fraction in a batch fluidized bed
G Srinivas and Y Pydi Setty, National Institute of Technology, Warangal, India
ASPEN Plus simulation and experimental study of different dry biomass solid waste gasification process using air–steam fluidized bed gasifier
R. Tripathy and A. Sahoo, National Institute of Technology, Rourkela, India
SESSION 1C1:
FLUIDIZATION AND GRANULAR FLOW
The porosity distribution in monodisperse and polydisperse fixed beds and its impact on the fluid flow
Sebastian Schulze, Petr A. Nikrityuk, Bernd Meyer, Institute of Energy Process Engineering and Chemical Engineering, Germany
Material Behaviour of Spherical Elastic-Plastic Granules at Diametrical Compression
Alexander Russell, Peter Müller and Jürgen Tomas, Otto von Guericke University of Magdeburg, Germany
Droplet spreading on micro-patterned and micro-porous granular beds
Ananth Praveen Kumar, Venkatanarayana Prasad S, Tamal Banerjee and Dipankar Bandyopadhyay, Indian Institute of Technology, Guwahati, India
Droplet spreading on micro-patterned and micro-porous granular beds
Ananth Praveen Kumar, Venkatanarayana Prasad S, Tamal Banerjee and Dipankar Bandyopadhyay, Indian Institute of Technology, Guwahati, India
Study of the dynamics of wet granulates under shear
Jayati Sarkar and Dheerendra Dubey, Indian Institute of Technology, Delhi, India
SESSION 1C2:
APPLICATIONS OF PARTICLE TECHNOLOGY
Oil agglomeration of coal fines in continuous Mode of Operation
Ankush Gupta, H.V.C. Chary Guntupalli, M.G. Dastidar, Indian Institute of Technology, Delhi, Central Pollution Control Board, Delhi, India
A comparative study on physico-chemical characteristics and synthesis of typical nanofluids
Ajay Vasishth, K.S.R. Murthy and Gagan Anand, University of Petroleum and Energy Studies, Dehradun, India
Optimization of the deposition parameters of DLC coatings with the IC-PECVD method
T.P.Singh and Vijay Kumar S. Jatti, Symbiosis Institute of Technology, Pune, India
Particle deposition of diamond-like-carbon on silicon wafers using inductively coupled PECVD
Vijay Kumar S.Jatti, T.P.Singh and Ravi Sekhar, Symbiosis Institute of Technology, Pune, India
Improving lubrication of EDM oil at higher shear rate and temperature with carbon nanotubes
Balram Tripathi and B. Ravindra and Y.M. Joshi, S S Jain Subodh (PG) College Jaipur, Indian Institute of Technology, Jodhpur, India, Indian Institute of Technology, Kanpur, India
SESSION 1C3:
APPLICATIONS OF PARTICLE TECHNOLOGY
WORKSHOP:
Application of powder technology to detection of fingerprints on crime scene evidence
G.S. Sodhi, S.G.T.B. Khalsa College, Delhi, India
WORKSHOP:
Nanoparticle synthesis, characterization, engineering applications: present challenges and future developments
Coordinators: Dr. Bonamali Pal and Dr. Bhupinder Chudasama, Thapar University, India (in collaboration with subject experts
DAY 2
INVITED EXPERT LECTURES
Recent advances in long distance belt conveyors
Gabriel Lodewijks, Delft University of Technology, Netherlands
Using threshold velocities to determine flow regime maps for pneumatic conveying
Haim Kalman, Ben-Gurion University of the Negev, Israel
Discrete element simulation of granular and multiphase flows
Navid Mostoufi, University of Tehran, Iran
Modelling milling processes
Avy Levy, Ben-Gurion University of the Negev, Israel
Imaging applied to particles and particles Systems characterization: fundamentals
Giuseppe Bonifazi and Silvia Serranti, University of Rome, Italy
Nucleophile induced reversible dissolution of metal in aqueous surfactant solution: an astounding conclusion
Tarasankar Pal, Indian Institute of Technology, Kharagpur, India
SESSION 2A1:
BULK SOLIDS HANDLING AND PROCESSING
WORKSHOP:
Conveyor dynamics
Gabriel Lodewijks, Delft University of Technology, Netherlands
Session 2A2:
Bulk Solids Handling and Processing
WORKSHOP:
Bulk material storage facilities – design and management considerations
Peter Wypych, University of Wollongong, Australia
SESSION 2B1:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
Chemical imaging applied to particles and particles Systems characterization: case studies
Giuseppe Bonifazi and Silvia Serranti, University of Rome, Italy
Facile synthesis of anisotropic Au nanostructures by laser irradiation and study their optical and electro-kinetic properties
Bonamali Pal and Rupinder Kaur, Thapar University, India
Magnetic properties of nano-structured Co and Ni synthesized by modified NaBH4 reduction route
Shankar B. Dalavi and Rabi N. Panda, BITS Pilani, Goa, India
Effect of processing variables on WC nanoparticles synthesized by solvothermal route
Gourav Singla, K. Singh and O. P. Pandey, Thapar University, India
A simple aqueous solution based chemical methodology for preparation of mesoporous alumina: efficient adsorbent for defluoridation of water
Desagani Dayananda, Venkateswara Rao Sarva, Sivankutty Vadakkethonippurathu Prasad, Jayaraman Arunachalam, Narendra Nath Ghosh, BITS Pilani, Goa, Bhabha Atomic Research Centre, Hyderabad, India, National Institute for Interdisciplinary Science and Technology (NIIST-CSIR), Kerala, India
SESSION 2B2:
PARTICLE MECHANICS AND SIMULATION
Effect of dune formation on pressure drop in horizontal pneumatic conveying system
Ajay B. Makwana, Ramjee Korada and Manaswita Bose, Indian Institute of Technology, Bombay, India
An investigation on flow pattern and velocity fields in a two dimensional flat bottomed rectangular silo with central and off-centre discharge
Sanjay K. Sardar, Ritwik Maiti, Prasanta K. Das and Gargi Das, Indian Institute of Technology, Kharagpur, India
CFD simulation for hydrodynamic behaviour of fine particles in a fluidized bed
P. Sahoo and A. Sahoo, National Institute of Technology, Rourkela, India
CFD analysis of hydrodynamic behavior in FC crystallizer
Anis Bakhsh and H. M. Jena, National Institute of Technology, Rourkela, India
Numerical simulation of solid liquid two-phase flow behavior in centrifugal slurry Pump
Satish Kumar, Thapar University, India
SESSION 2C1:
FLUIDIZATION AND GRANULAR FLOW
Optimizing granulating fluid levels in high shear wet granulation using wet mass rheology
S. Arelly, S. Priyadarshini, A. Haque, H. Verma, R. Gandhi*, K. Venkatesh, Dr. Reddy's Laboratories Ltd.
Pressure drop and gas holdup studies in a spout-fluid bed
Sujan Kumar B and Venu Vinod A, National Institute of Technology, Warangal, India
Effects of physical and mechanical properties on fluidized bed drying of rajma seed
S. Jena and A. Sahoo, National Institute of Technology, Rourkela, India
Studies on parameter optimization for particle growth in a fluidized bed granulator: interval halving method
Abanti Sahoo and Lisa Sahoo, National Institute of Technology, Rourkela, India
Segregation in horizontally shaken binary granular mixtures in Christmas-tree channel
Ashish Bhateja, Ishan Sharma and Jayant K Singh, Indian Institute of Technology, Kanpur, India
SESSION 2C2:
APPLICATIONS OF PARTICLE TECHNOLOGY
Hot deformation behaviour of Aluminium composite produced through powder metallurgy route
A. Rajeshkannan, University of the South Pacific, Laucala Campus, Fiji
A novel multipurpose powder/small particle composition for detection of fingerprints on a legion of crime scenes
G.S. Sodhi and Jasjeet Kaur, S.G.T.B. Khalsa College, Shaheed Rajguru College of Applied Sciences for Women, Delhi, India
Sol gel derived hierarchially porous granular ceramics and aerogels for multifunctional applications
Linsha Vazayal, K.V. Mahesh and S. Ananthakumar, National Institute for Interdisciplinary Science and Technology, Kerala, India
AC and DC conductivity studies on lead free ceramics:Sr1-xCaxBi4Ti4O15(x=0, 0.2 to 0.8)
Gagan Anand, Ajay Vasishth, Piyush Kuchhal and P. Sarah, University of Petroleum and Energy Studies, Dehradun, India
Development of closed-cell aluminum composite foams
Suresh Kumar, Ranvir Singh Panwar and O. P. Pandey, Thapar University, India
DAY 3
INVITED EXPERT LECTURES
Some fundamental aspects of the rheology of dense granular materials
Prabhu R. Nott, Indian Institute of Science, Bangalore, India
Re-interpretation of fluidization
Xianfeng Fan, University of Edinburgh, UK
Energy saving pneumatic conveying of bulk solids
Arika Rinoshika, Yamagata University, Japan
The significant parameter for the production of nanoparticles by stirred media milling
B. Pitchumani, Institute of Technology, New Delhi, India
Modelling dense-phase pneumatic conveying of bulk solids
Chandana Ratnayake, Tel-Tek Institute, Norway
Recent advances in pipe conveyor technology
Renhu Pan, Fujian Longking Company, China
SESSION 3A1:
BULK SOLIDS HANDLING AND PROCESSING
WORKSHOP:
Ash handling systems in thermal power plants
Renhu Pan, Fujian Longking Company, China
SESSION 3A2: BULK SOLIDS HANDLING AND PROCESSING
Understanding powder caking as a consequence of a range of mechanisms by means of powder rheometry
Tim Freeman, Nishil Malde and Yogin Chandorkar, Freeman Technology, UK and Aimil India
Coal blending for Indian power plants –a case study
Dipta Sundar Mallick, Development Consultants Private Limited, Kolkata, India
Bulk hydraulic disposal of fly ash slurry at high solids concentrations
P. K. Senapati and B. K. Mishra, CSIR-IIMT, Bhubaneswar
Blinded T-bends flow patterns in pneumatic conveying systems
Nir Santo and Haim Kalman, Ben-Gurion University of the Negev, Israel
Powder consolidation – why it is a problem and how to solve it
Nilay Shah, Brookfield Engineering USA
SESSION 3B1:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
Enhanced stability, conductance and catalytic activity of gold nanoparticles via oxidative dissolution by KMnO4
Anila Monga and Bonamali Pa, Thapar University, India
Effect of pH on synthesis of single phase Titania (TiO2) nanoparticles and its characterization
G. Sarala Devi K. Shanth Kumar, Indian Institute of Chemical Technology, Hyderabad, India
Processing and characterization of plasma spray coatings of glass micro-spheres premixed with Al2O3 particles
Gaurav Gupta and Alok Satapathy, National Institute of Technology, Rourkela, India
Morphological study of carbon nanoparticles synthesized at high temperature and pressure
Mani Mahajan, K. Singh and O. P. Pandey, Thapar University, India
SESSION 3B2:
PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION
Effect of thermal treatment on morphology and photocatalytic activity of fe-impregnated sodium titanate nanotubes
Inderpreet S. Grover, Satnam Singh and Bonamali Pal, Thapar University, India
Photocatalytic degradation of Janus Green B using TiO2 nanoparticles synthesized by sol gel method
Pooja Singla, Manoj Sharma, O.P. Pandey and K. Singh, Sri Guru Granth Sahib World University, Thapar University, India
Development of gypsum powder admixture for exterior wall plaster
Sudhir K. Singh, Thapar University, Patiala, India
SESSION 3C1:
APPLICATIONS OF PARTICLE TECHNOLOGY
Improvement of aerated discharge rate of cohesive powders by nano-coating
Sanat Chandra Maiti, Vikram Karde and Chinmay Ghoroi, Indian Institute of Technology, Gandhinagar, India
Experimental investigation of magnetic field assisted EDM with powders mixed in dielectric
Geeta Bhatt, Ajay Batish, Anirban Bhattacharya, Thapar University, India
Epoxy composites filled with micro-sized AlN particles for microelectronic applications
Alok Agrawal, Alok Satapathy, National Institute of Technology, Rourkela, India
Study of broken glass granules to find cause of failure of windshield automobiles glass
Bhupinder Kaur and O.P. Pandey, Thapar University, India
Mineralogical studies of fly ash that acts as a soil ameliorant in agriculture
Rajinder Kaur and Dinesh Goyal, Thapar University, India
SESSION 3C2:
APPLICATIONS OF PARTICLE TECHNOLOGY
High sensitivity and selective response of ZnO: Nb2O5 nanocomposite based hydrogen gas sensor
G.Sarala Devi, P. Siva Prasad Reddy and K. Ramya, Indian Institute of Chemical Technology, Hyderabad, India
Development of plasma spray coatings using Linz-Donawitz (LD) slag particles
Pravat Ranjan Pati and Alok Satapathy, National Institute of Technology, Rourkela, India
Powder mixed dielectric: an approach for improved process performance in EDM
Ajay Batish, Anirban Bhattacharya and Naveen Kumar, Thapar University, India
Effect of different ceramic particle on the sliding wear behavior of Al-Si alloy composites
Ranvir Singh Panwar, Suresh Kumar, O.P. Pandey, Thapar University, India
Effect of vortex finder diameter on flow field and collection efficiency of cyclone separators
L.S. Brar, R.P. Sharma and R. Dwivedi, BIT Mesra, Ranchi
You find the complete Program as PDF in the attachment below.
Regards,
S.S.Mallick
PGBSIA 2013 Conference Organizing Secretary
--
-----------------------------------------------------
Dr. S.S.Mallick, Assistant Professor
Department of Mechanical Engineering
Thapar University,Patiala, Punjab - 147004, INDIA
Phone (office): +91 0175 239 3364, Mobile: +91 9592697176
Email: http://www.thapar.edu/facultyDetail....d=40&facId=312facultyDetail.asp?subId=8µId=40&facId=312
Attachments
conference program_v1-1 (PDF)
■