Dry & Wet
Alumina is hygroscopic. Is the before and after moisture situation known from the downstream process data? ■
Jamming In Iron Ore Bunker
It is not clear whether the outlet jams due to lumps or cohesive arching. The first step is to estabish the reason for the blockages. Have comparative samples been tested for shear strength? ■
Eliminating The Bridging & Clogging Problem In Iron Ore Bunkers…
Dear Selvam,
Greetings.
we do have a solution to your problem of jamming in Iron Ore Bunkers with Magnetic Impulse Technology. for more details please contact us at amitengrs@yahoo.co.in.
Contact Persons : AMIT AGARWAL - 09848196449
V V R MURTHY - 09505175566
Regards
MURTHY.vvr
Asst.Manager(Projects)
+91 9505175566 ■
Solution For The Jamming Problem
Dear Selvam,
Greetings,
We do have a solution to your problem of jamming in Iron Ore Bunkers with Magnetic Impulse Technology. For more details please contact us at amitengrs@yahoo.co.in.
Expecting a early reply..
Regards
Murthy.VVR
+91 9505175566
Added by Administrator as an example:
■
Re: Problem Of Jamming In Iron Ore Bunker
Hello,
The easiest solution is to have S.S. liners at bunker outlet zone for about 1.5 / 2.0 m length from outlet opening. S.S. has less friction coefficient compared to M.S. and so, it may work, if jamming problem is not so acute.
The next solution is to install vibrator at chute outlet zone.
If both do not work, then the issue is of more serious nature i.e. outlet size is quite smaller compared to minimum required and needs to be increased, could be only along one axis or both the axes in plan view.
Regards,
Ishwar G. Mulani
Author of Book: Engineering Science And Application Design For Belt Conveyors (new print November, 2012)
Author of Book: Belt Feeder Design And Hopper Bin Silo
Advisor / Consultant for Bulk Material Handling System & Issues.
Pune, India.
Tel.: 0091 (0)20 25871916
Email: conveyor.ishwar.mulani@gmail.com
Website: www.conveyor.ishwarmulani.com ■
Problem of Jamming in Iron Ore Bunker
Our iron ore bunker of capacity 80 t is recently getting frequent material jamming at its discharge. The only change in the raw material is the % of alumina in iron ore is increased by 5%. Our bunkers are MS made with out any internal liners. But we never faced these problem of chocking before few months. Can anybody suggest any solution?
Added by Administrator as an example:
Iron Ore Bunker ■