Fox Venturi Eductor conveys ash at temps up to 900° C - with No Moving Parts

Fox venturi eductors have been used to pneumatically convey high temperature solids - with no moving parts - for over 40 years. In this recent application, Fox was contacted for a simple application to convey approx 10,000 lbs/hr of flyash, a few hours per week, into a furnace to burn off impurities. Expected ash temperature was approximately 760 ° C . A standard 8 inch/ 200 mm Fox venturi eductor was installed with a matched pd blower, also supplied by Fox Venturi Eductors, with air flow rates carefully controlled to maintain appropriate convey velocities, essential for minimizing both erosion and power consumption.

Shortly after installation - required performance changed from operating a few hours per week with ash at 760 ° F - to continuous, 24/7 service - with ash temps at an elevated 900° C. The photo above shows this Fox eductor in service, glowing red, conveying ash at 850 - 900° C . This eductor has been in service for approx one year. Fox eductors for high temperature installations are available in materials like carbon steel, 316 ss and high nickel alloys.

For more information, please visit:

https://edir.bulk-online.com/profile...-fox-valve.htm1806 fox venturi eductors fox valve.htm

Google Search:

http://www.google.com/search?client=...ulk-online.comsearch?client=safari&rls=en&q=Fox+Venturi+Eductor+site:bulk online.com

http://www.google.com/search?q=Fox+V...=lnms&tbm=ischsearch?q=Fox+Venturi+Eductor+site:bulk online.com&hl=en&client=safari&tbo=d&rls=en&source=lnms&tbm=isch

Return to:

1806 fox venturi eductors fox valve.htm ■