Separating Steel Scrap Rods From Iron Ore
Dear Sir!
Benefit from our vast experience to find the utmost solution for processing your materials!
We are going strong in processing technology worldwide for more than 6 decades developing leading technologies in this field all over the years. Minerals, metals, chemicals, sugar, salt or anything else - just contact us! We will design a tailor made plant adapted properly to your problem. Well proven standard components will be combined to an individual solution fitting exactly to your requirements.
Please send all information (Contactinformation, company information, whole projectinformation a.s.o) to the following emailadress: info@rhewum.com
Best regards
S.Schäfer ■
Try A Rattle Trap
Unfortunateley there is not yet a single deck screen which will do what you need, and clearly must accomplish.
Your solution is fairly straightforward, filter manufacturers would refer you to the topic of 'depth filtration'. Long particles pass the appertures and can then, because of their alignment, be impeded by a deck running just below the deck they passed. Your decks must not be much farther apart than the undersize you wish to collect. That means a low bed depth and therefore a small throughput.
The lower deck is blank and the rods would have to be removed periodically.
Come in the experts. ■
Cross Belt Magnet
RECOMMEND:
use of a cross belt magnet........DINGS, WALKERS, ERIEZ or other to SNATCH the steel rods.........off the deck and drop off to the side.....of the vibrating screener.
yes no? mabe? ■
Re: Vibrating Screen Output
Magnetite will stick to the rods so it has to be mechanical separation. ■
Link May Help.......
Re: Vibrating Screen Output
The one and only formula: send enough information! Tell us what you have and what you want and we will tell you what you will need to get it. ■
Detect/Remove Tramp Iron From Magnetite Ore?
I'm looking for experiences relating detection/removal of tramp iron from magnetite ore.
How can tramp iron get separated from a circulating load of a SAG mill in pebble crushing conveyor line? ■
By Specific Gravity Separation Maybe.....
CHECK OUT CFS...on internet....particles of different specific weight can be separated by a density separation process.....
CHECK THIS LINK: these folks are very sharp..
http://www.cfs-web.com/DensitySepara...2/Default.aspx ■
Metal Detector ?
i undersrand u want to a metal detector , to check if have metal tramp ,give u signal ? then u can use iron separaror to remove the iron tramp.also u can email to me :alice1986liu@yahoo.cn
this is my contact details.
best regards,
Alice liu
Mobile:86 13869632395
Alibaba:Trademanager: cn1000302834
Email: alice1986liu@yahoo.cn
MSN: alice20101010@hotmail.com
Yahootalk: alice20101010@yahoo.cn
website: www.sdhuate.com ■
Re: Vibrating Screen Output
Read some chapters of VSMA(vibrating screen mannufacturer association handbook), i think that book is a good guider for you. ■
Vibrating screen output
What is the formula to find capacity and the output grading of the screens ■