Dust Filter & Bag Filter Design Calculations
blaryon,
Design of bag filters and duct systems cannot be learned in a hurry. It requires large amounts of experience and knowledge about the characteristics of dust.
If you have a specific need for an actual system, go to reputable bagfilter manufacturers and ask for a quotation.
If you are simply seeking knowledge, start with "Industrial Ventilation" published by the American Conference of Governmenal Industrial Hygienists. It has all the basics.
Design of airslide conveyors is a similarly tricky subject. Look for posts on this forum by Dr. Amrit Agarwal. He has been able to help others on the subject.
Michael Reid. ■
Bag Filter Design
You may like to read my article "Design Guide for Dust Collectors". It was published in 2005 by Chemical Engineering. This article should answer most of your questions.
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Ph and Fax: 304 346 5125 ■
Re: Dust Filter & Bag Filter Design Calculations
Dear Dr. Amrit Agarwal, Dear Michael Reid,
Many thanks for your quick reaction, the material we deal with is cement.
in order to have the knowledge what i can have and through what source and how can i get it?
please if you can send to me a copy of the mentioned article "Design Guide for Dust Collectors" and "Industrial Ventilation".
truly i appreciate your effort and your accomulated searchs and studies, and which will help many engineer all around.
since the first time i deal with dedusting field and low knowledge of the naturer and variation of it, my quesions is sometimes seem to be general, so if can contact with your team i think i will get up.
thanks again for your time. ■
Untitled
I believe that you may purchase the publications at the following:-
http://goliath.ecnext.com/coms2/summ...99-3709748ITM
http://www.acgih.org/store/ProductDetail.cfm?id=1905 ■
Industrial Ventilation Guide Book
Dear Messer's,
Many thanks for your efforts, but realy i havn't get the books and magazine you have mentioned before, i need you to send it to my e-mail below if it possible and this will be highly appreciated.
thanks
blaryon@yahoo.com ■
Re: Industrial Ventilation Guide Book
Originally posted by blaryon
Dear Messer's,
Many thanks for your efforts, but realy i havn't get the books and magazine you have mentioned before, i need you to send it to my e-mail below if it possible and this will be highly appreciated.
thanks
blaryon@yahoo.com
Why can't you just buy them?? We all have to. ■
Untitled
Hi all
I am new member and seeking for the same design procedure of dust collector and Bucket Elevator i have some broken threads of their design procedure.Like
For Dust Collector calc. of motor power:
Motor Power(KW)= Air Volume (m3/hr) * Pressure (mmWG)/ 3600*100*.8*.8 (fan & motor efficiencies)
But these methods are not so reliable.
So please suggest me any data book about Bucket Elevator design also and if anyone has above mentioned book "Design Guide for Dust Collectors" plz send me a copy.
Looking forward for your kind replies.
SANDEEP SHEOKAND ■
Dust Filter & Bag Filter Design
As already advised by Designer, you can BUY a copy of "Industrial Ventilation" from the American Conference of Governmental Industrial Hygienists, (or from Amazon etc.).
This will answer your questions.
Michael Reid. ■
Untitled
Originally posted by sandeep kumar
if anyone has above mentioned book "Design Guide for Dust Collectors" plz send me a copy.
SANDEEP SHEOKAND
[Rant On]
Why oh why do so many people expect others to buy books then donate copies to them!!
ANYONE worth their salt should expect to invest in their own future not try to get on, on the backs of others!
[Rant Off] ■
Re: Dust Filter & Bag Filter Design Calculations
Don't always try to get free,. buy it
Originally posted by designer
[Rant On]
Why oh why do so many people expect others to buy books then donate copies to them!!
ANYONE worth their salt should expect to invest in their own future not try to get on, on the backs of others!
[Rant Off]
■
Dust Filters And Bag Filters Calculation
first of all hello to all members as iam the new entrant in this forum.dear Sandeep kumar i also gone through the same problem of bagfilter selection the best method is to got to EPA usa site u will find free downloadable hand books of bagfilters and their types plz go through them if not satisfied asked me i shall send u some material
regards
ashish dagwar ■
Re: Dust Filters And Bag Filters Calculation
Dear Mr. Ashish
So nice of you for your reference. Some how I could not get into the right button to download the same.
If it doesn't bother you much and you have the soft copy available, Please mail to me i.e rajesh@merittech.co.in
Best Regards
Rajesh Kumar
Originally posted by ashishdagwar
first of all hello to all members as iam the new entrant in this forum.dear Sandeep kumar i also gone through the same problem of bagfilter selection the best method is to got to EPA usa site u will find free downloadable hand books of bagfilters and their types plz go through them if not satisfied asked me i shall send u some material
regards
ashish dagwar
■
Free Spreadsheet Calculations
Hi all,
Go to www.cospire.com /Browse /Engineering Tips / Bulk Gases for a free Dust Collector Calculation Spreadsheet. This also gives literature referrences.
If you have any questions regarding the baghouse and filter unit, then get on the phone to your Baghouse Vendor. Together you should be able to solve the problem.
Regards - John.Rz
http://www.cospire.com/koviewer.aspx?id=13638 ■
Re: Dust Filter & Bag Filter Design Calculations
I represent baghouse.com, we can make custom filters and also provide installation and service.
Please shoot me an email at yousufnabi@baghouse.com with your exact specifications. ■
Re: Dust Filter & Bag Filter Design Calculations
Mr. Amrit Agarwal,
Can you please send me the copy of "Design Guide for Dust Collectors".
Thanks and Regards,
Atul Hingnekar
atulkumarhingnekar@gmail.com ■
Re: Dust Filter & Bag Filter Design Calculations
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Which publishing date?
Thony ■
Article: "Design Guide For Dust Collectors"
Thony,
My article "DESIGN GUIDE FOR DUST COLLECTORS" was published as a Feature Report by Chemical Engineering magazine in its February 2005 issue.
Regards,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Ph and Fax: 304 346 5125 ■
Re: Dust Filter & Bag Filter Design Calculations
My article "DESIGN GUIDE FOR DUST COLLECTORS" was published as a Feature Report by Chemical Engineering magazine in its February 2005 issue.
Regards,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Ph and Fax: 304 346 5125
Thanks, I was checking the Chemical Engineering magazine and coud not find it, I do not have acces to archives of the Chemical Engineering magazine. But thanks for the quick respons.
Thony ■
Article By Amrit T. Agarwal,
Dear Amrit T. Agarwal,
Could I have a copy of your article "Design Guide for Dust Collectors" that you mention in this thread.
Also could I please receive a copy of your articles;
"Theory and Design of Pneumatic Conveying Systems"
"Design Guide for Dust Collectors"
"Improving Rotary Valve Performance"
"Product Quality in Pneumatic Conveying"
"Rizk or Matsumoto saltation velocity co-relations"
They were highly recommended to me by a mentor.
Regards,
Russell ■
Filters Liquid Duplex, Filters Liquid Bag
Hi blaryon
I am also finding for the same.i got solution at http://www.industrialdynamics.com/ma...filtration.htm
if you want more information please visit above url ■
Re: Dust Filter & Bag Filter Design Calculations
Dear Dr. Amrit Agarwal,
Many thanks for your quick reaction, the material we deal with is cement.
In order to have the knowledge what i can have and through what source and how can i get it?
please if you can mail (Mail ID written in Below) to me a copy of the mentioned article "Design Guide for Dust Collectors" and "Industrial Ventilation".
Truly I appreciate your effort and your accomulated searchs and studies, and which will help many engineer all around.
thanks again for your time.
Harihar N Dora
harihar.dora@acclimited.com ■
Design Of Dust Collector
Dear Amrit,
Hi Amrit, can i please have a copy of your publication " Design of Dust Collector " ? I am trying to find some theoritical calculation of A/C ratio and can velocity ratio for some time already, A/C ratio really doesn't seems to be too much of a issue as it doesn't affect the dust collector as muh as can velocity.
Thank you very much for sharing your experience with us ■
Re: Dust Filter & Bag Filter Design Calculations
Hi Amrit, can i please have a copy of your publication " Design of Dust Collector " ? I am trying to find some theoritical calculation of A/C ratio and can velocity ratio for some time already, A/C ratio really doesn't seems to be too much of a issue as it doesn't affect the dust collector as muh as can velocity.
Thank you very much for sharing your experience with us
Dear SeventhEro,
I am sending a copy of my article "DESIGN GUIDE FOR DUST COLLECTORS" published in Chemical Engineering magazine as a "Feature" article in its February 2005 issue. It should answer all of your questions.
Regards,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Dust Filter & Bag Filter Design Calculations
Hi All,
I am new member and kindly if there are any calculations or design corelations of design the bag filter:
* the air volume of the system( how it estimated)
* the filter area required by the filter unit( how can choose it)
* the size of the fan Set
* the velocity of the air suction
* the negative pressure estimation
* the shap limitations
and please inform me any data about air slide and it's applications and when , why it used.
i will be very thanks if any one can help me with this ASAP. ■