gentleman, We can share our 30 years of experiance with your esteemed organisation by providing the following services for your project--

1. Preperation of General Arangement dwg. which will show arrangement for various equipment and facilities for unloading of

pellets from ship to shore site.

2. Selection and main specifications for-Ship Unloaders,Jetty, Jetty conveyor,arrangement for stockpiling,stacker and reclaimers and extraction conveyors up to plant.

3. Selection of best suppliers/vendors.

4. Various facilities and description for the same.

5. Prices for the entire plant

In India,the undersigned is providing his services as Material Handling Consultant (Ports) to world renowned companies like--

Royal Haskoning,CES,Fredrick-R-Harris(Mounsel),Rites ,Mercator Lines and Halcrow.

We have done more then 15 systems for loading/unloading of Coal,Coke,Iron Ore,Cement,Flyash and Clinker ect.

Anil Seth

Director-Libran Engineering & Services,India

www.libranengineering.com

0091-9811055650 ■

Dear Induconsult,

At Dos Santos International we specialize in bulk materials handling and transport with belt conveyors. We are the world's foremost experts in the Sandwich-Belt High-Angle conveyor technology. Our systems are used to elevate bulk materials at very high volumetric rates using smooth surfaced rubber belts that can be continuously scraped clean. Dos Santos Sandwich Belt systems have been used at many and varied installations including ship loading and unloading systems. Sandwich Belt systems are the vital part of any continuous self-unloading ship system serving the full length gathering and elevating duties to the ship's deck at rates of up to 10000 tons per hour.

Please check out our web site to learn more about Dos Santos International.

Joseph A. Dos Santos ■

DEAR SIR,

I AM LEADING DESIGN & ENGINEERING GROUP OF MORE THAN 20 ENGINEERS INVOLVED IN DESIGNING AND ENGINEERING OF SHIP UNLOADING SYSTEM ALONG WITH ENTIRE RAW MATERIALS HANDLING SYSTEM INVOLVING STAKING IN STOCK YARD, RECLAIMING AND CARRYING IT TO BLENDING/ DRYING PLANTS AND THEREAFTER STACKING IN STOCK HOUSE FROM WHERE MATERIALS WILL BE FURTHER WITHDRAWN THROUGH V. FEEDERS AND WEIGH HOPPERS TO CARRY THE SAME TO FURNACE CHARGING SKIPS/CONVEYORS.

I AM JT GENERAL MANAGER IN MATERIALS HANDLING DEPT. IN ESSAR ENGINEERING CANTRE WHICH IS DESIGN AND ENGG ARM OF INDIA'S ONE OF THE LARGEST BUSINESS GROUP i.e. ESSAR GROUP. I HAVE RICH EXPERIENCE OF WORKING FOR PROJECTS OF SAIL, JSPL, SJK STEEL, VISHKHAPTNAM STEEL PLANT AND SEVERAL OTHERS UNDER MECON, MY PREVIOUS EMPLOYER.

WE ARE PUTTING UP 4 MT INTEGRATED STEEL PLANT WITH SAME TECH ROUTE EACH IN TRINIDAD AND IRAN ANG ALSO 3N0S 6MT PLANT IN INDIA ITSELF TO ACHIEVE MORE THAN 25MT STEEL PRODUCTION IN NEXT 5 YEARS.

WE PROVIDE COMPLETE DESIGN & ENGINEERING SERVICES FOR INTEGRATED STEEL PLANTS WITH SIMILAR FACILITIES AS YOURS.

REGARDS

SATISH KUMAR SRIVASTAVA

MOB : +91-9925226754

EMAIL: ssrivastava2@essar.com, satishksr@yahoo.com ■

We are Northeast Technical Services Co., Inc. of Cleveland Ohio USA. We are a firm of marine consultants, naval architects and marine engineers specializing in the design, construction and operation of ships and barges of all types, as well as shore-side and dock facilities to support them. Our particular area of expertise is in bulk material handling; including the design of self-unloading ships and barges, as well as shore-based unloading and distribution systems.

We specialize in the transport, loading, unloading and distribution of bulk materials like iron ore pellets, coal, limestone, cement, bauxite, phosphate, etc. We have extensive experience in the design and construction of all related systems, such as conveyors, elevating systems, feeder devices, drives, controls, and automation. We can assist you with conceptual studies, alternative arrangement reviews, economic evaluations, finished arrangement drawings, system schematics and arrangements, vendor selection, contract specification preparation, etc.

We look forward to the possibility of sharing our knowledge and expertise with you. Please contact the undersigned to initiate any discussions.

Richard A. Mueller

President

Northeast Technical Services Co., Inc.

P.O. Box 38189

Cleveland, Ohio 44138

USA

+1 (440) 236-9191Office

+1 (440) 236-9188Fax

rmueller@netsco.us ■

Hello,

We, the people of ThermoFisher Scientific will help you with your questions.

If you're looking for equipment for weighing, sampling,inspection,detection or analysing, your bulkflow, we can help you with advise.

For more than 50 years we have expierence in mining , ore & bulk handling.

We as a global company,can give you worldwide support.

find us at www.thermo.com/bulk-handling.

If you have any questions, please contact us.

Regards, Naud Luijerink

naud.luijerink@thermofisher.com ■

Dear Sir,

we are in the range of Conveyor Technology active, specialised in steep angle and vertical conveying systems for bulk material. We can assist you with Basic-Engineering and offer you the required Sidewall conveyor belts.

Enclosed you will find a link to our website for further information`s about ship loading/unloading systems.

http://www.hasesystems.at/index.asp?cid=52&lng=en

Please don´t hesitate to contact us if something is unclear respectively for further information`s.

Kind regards

Richard Lippert ■

Dear Richard, We are providing consultancy to one Malaysian company where coal has to be lift up at 18 m,due to lack of space there is a need to provide vertical equipment like bucket elevator or side wall conveyor.Since the feeding capacity is 1000 tph,it is n advisable not to go for single bucket elevator of 1000 tph cap.Instead of going for 2x500 tph cap. elevators it is better to go for single 1000 tph side wall conveyor.To make this job more interested to the client, we intend to buy conveyor from you and rest of the structure we will fabricate in Malasiya.

Can you send me your complete tech. specification and price for the complete system and also advise about the parts/structure to be manufacture locally on mail id--libranengineering@gmail.com

Main information about the equipment--

Material-coal

Max. size--100 mm

lift--18 m

temp--60 deg. max.

Regards,

Anil Seth

Director ■

Dear Sirs,

With regards to the above mentioned project> Kindly note that we are very much interestes to apply as a tenderer & bid for the above mentioned project.

Yours Sinecerely,

Gihan Farid

Reliance Heavy Industries ■

Dear Sirs,

River Consulting is a multi-discipline consulting engineering firm with over 25 years experience in the design and construction of material handling facilities. We have direct and specific experience in the design of facilities for the unloading of ship and barges handling multiple bulk commodities such as coal, iron ore, and pellets, as well as experience in the design of DRI facilities themselves.

Our experience and capabilities include the design of the marine structures, unloading systems, design and supply of conveying equipment, as well as design of storage and reclaim systems for feed to the facility. We can assist with all phases of the project, from conceptual and preliminary design through detailed design, construction, start-up and commissioning. We have provided project services in 56 countries worldwide.

We would appreciate the opportunity to discuss your project in greater detail. Please feel free to visit our website or contact me at the address below. Thank you.

Gregory DiFrank, P.E.

Executive Vice President

3000 Corporate Exchange Drive, Suite 400

Columbus, Ohio 43231

614 797 2283

www.riverconsulting.com ■

Check out Samplex.co.uk for bulk sampling which includes pellets. I know they supply transfer systems, sampling systems and Holmen pellet durablity testers worldwide. ■