Replies
Error On Promag 30f
Posted on
31. Jan. 2009 - 09:28
Electromagnetic Flow Measuring System - Flow rate measurement of liquids with solids content or inhomogeneous liquids
Application
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ? 5 µS/cm - in particular fluids with solids, and fluids which are abrasive, inhomogeneous or tend to build-up, for example:
• Chemical/mechanical pulps, paper pulp or wood pulp with solids contents up to 15 Vol.-%
• Fruit mashes, fruit concentrates and final products (salad dressings, soups with vegetable pieces)
• Slurries containing high amounts of sand or stone with an abrasive effect, e.g. ore slurry or mortar
• Chemically inhomogeneous fluids (e.g. additives)
• Thick wastewater sludges
• Flow measurement up to 9600 m3/h (44 000 gal/min)
• Can be used up to +180 °C [+356 °F] and max. 40 bar [580 psi]
• Fitting lengths as per DVGW/ISO
Application-specific linings and electrodes:
• Natural rubber, polyurethane, PTFE or PFA linings
• Flat, bullet nose, neck, bow or brush electrodes
Approvals for hazardous area:
• ATEX, FM, CSA
Connection to process control system:
• HART, PROFIBUS PA, FOUNDATION Fieldbus
Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The Proline transmitter concept comprises of:
• High degree of efficiency due to the modular device and operating concept
• Software options for: electrode cleaning, advanced diagnostics, calculation of mass flow and solids content
The robust Promag S sensors offer:
• Universal devices, even for difficult fluids
• Excellent accuracy and repeatability
• High resistance to abrasion thanks to industryoptimized linings and measuring electrodes
• Optimum operational safety due to advanced, permanent self-diagnosis
• Simple installation and commissioning
• Insensitive to vibration
• No pressure loss
For more information, please visit:
https://edir.bulk-online.com/profile...esstechnik.htm
Application
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ? 5 µS/cm - in particular fluids with solids, and fluids which are abrasive, inhomogeneous or tend to build-up, for example:
• Chemical/mechanical pulps, paper pulp or wood pulp with solids contents up to 15 Vol.-%
• Fruit mashes, fruit concentrates and final products (salad dressings, soups with vegetable pieces)
• Slurries containing high amounts of sand or stone with an abrasive effect, e.g. ore slurry or mortar
• Chemically inhomogeneous fluids (e.g. additives)
• Thick wastewater sludges
• Flow measurement up to 9600 m3/h (44 000 gal/min)
• Can be used up to +180 °C [+356 °F] and max. 40 bar [580 psi]
• Fitting lengths as per DVGW/ISO
Application-specific linings and electrodes:
• Natural rubber, polyurethane, PTFE or PFA linings
• Flat, bullet nose, neck, bow or brush electrodes
Approvals for hazardous area:
• ATEX, FM, CSA
Connection to process control system:
• HART, PROFIBUS PA, FOUNDATION Fieldbus
Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The Proline transmitter concept comprises of:
• High degree of efficiency due to the modular device and operating concept
• Software options for: electrode cleaning, advanced diagnostics, calculation of mass flow and solids content
The robust Promag S sensors offer:
• Universal devices, even for difficult fluids
• Excellent accuracy and repeatability
• High resistance to abrasion thanks to industryoptimized linings and measuring electrodes
• Optimum operational safety due to advanced, permanent self-diagnosis
• Simple installation and commissioning
• Insensitive to vibration
• No pressure loss
For more information, please visit:
https://edir.bulk-online.com/profile...esstechnik.htm
I have a promag 30f flow meter it shows error on its display may you please tell
whats the cause of it ? ■
Flow Measuring System
Electromagnetic Flow Measuring System - Flow rate measurement of liquids with solids content or inhomogeneous liquids
Application
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ? 5 µS/cm - in particular fluids with solids, and fluids which are abrasive, inhomogeneous or tend to build-up, for example:
• Chemical/mechanical pulps, paper pulp or wood pulp with solids contents up to 15 Vol.-%
• Fruit mashes, fruit concentrates and final products (salad dressings, soups with vegetable pieces)
• Slurries containing high amounts of sand or stone with an abrasive effect, e.g. ore slurry or mortar
• Chemically inhomogeneous fluids (e.g. additives)
• Thick wastewater sludges
• Flow measurement up to 9600 m3/h (44 000 gal/min)
• Can be used up to +180 °C [+356 °F] and max. 40 bar [580 psi]
• Fitting lengths as per DVGW/ISO
Application-specific linings and electrodes:
• Natural rubber, polyurethane, PTFE or PFA linings
• Flat, bullet nose, neck, bow or brush electrodes
Approvals for hazardous area:
• ATEX, FM, CSA
Connection to process control system:
• HART, PROFIBUS PA, FOUNDATION Fieldbus
Your benefits
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.
The Proline transmitter concept comprises of:
• High degree of efficiency due to the modular device and operating concept
• Software options for: electrode cleaning, advanced diagnostics, calculation of mass flow and solids content
The robust Promag S sensors offer:
• Universal devices, even for difficult fluids
• Excellent accuracy and repeatability
• High resistance to abrasion thanks to industryoptimized linings and measuring electrodes
• Optimum operational safety due to advanced, permanent self-diagnosis
• Simple installation and commissioning
• Insensitive to vibration
• No pressure loss
For more information, please visit:
https://edir.bulk-online.com/profile...esstechnik.htm
Attachments
promag-55s-web (JPG)
■