Re: Pneumetic Conveying For Cement, Barrite And Bentonite
Good Day Sir
For the forum members to help you, we need to know significantly more information about your existing system, and what you are trying to acheive.
System geometry, capacity, equipment size, etc., are all important to know as well as current operating parameters of air flow, pressure, current capacity, etc.
Our firm specializes in working with clients to solve material handling problems such as this.
If you would like a complete analysis of your existing system and a recommended solution, please contact me at my e-mail address below, and we can try to help you.
Regards ■
Pneumatic Conveying System Analysis
Dear Hishamuddin,
If you know basic Excel, you can use the calculation method given in my article "Theory and Design of Pneumatic Conveying Systems" published in Powder Handling and Processing magazine in its April 2005 issue. I can send a free PDf copy if you need one. I will also help you if you need my help in these calculations.
Good luck,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Ph and Fax: 304 346 5125 ■
Re: Pneumetic Conveying For Cement, Barrite And Bentonite
Dear Sir,
we use homebrew pneumatic conveying equipment extensively in our plant. Design based on trial and error but working well now.
Naturally I am interested in your article and would be obliged, if you sent me a copy also.
Gerd Vieregge-Heyng
gvh.ferroxon@t-online.de ■
Re: Pneumetic Conveying For Cement, Barrite And Bentonite
Dear Mr Hisham,
On www.powderandbulk.com you can find under " Help Forum" a review about your question in the thread " Ask Joe - Get a Pneumatic Conveyor to Handle More"
To help you specifically, please supply us with more system info
Success ■
Teus
Pneumatic Transport Calculation Schemes
Dear Amrit,
Thanks a lot for your generously sending me that extensive information.
I will put myself to studying it, and hope, that it will be the end of guessing, when a new application has to be designed.
Great to know a forum like this, where solid advice and information is given freely!
Thanks again.
Gerd ■
Re: Pneumetic Conveying For Cement, Barrite And Bentonite
Dear Amrit,
Thanks a lot fr yr article and Excel calculation. It has help me and I've much better understanding in system designing.
Thanks
Hishamuddin ■
Mr Agarwal's Article On Dust Collectors
Dear Mr Agarwal,
I found your article on dust collectors extremely useful. It is straight forward and easy to follow.
Regards,
Mr Joseba Elizalde ■
Re: Pneumetic Conveying For Cement, Barrite And Bentonite
Dear Armit,
thanks for the article of yours.
This article is very helpfull and easy to understand...makes work a little easier.
Regards,
Oliver ■
Pneumetic Conveying for Cement, Barrite and Bentonite
I've just receive an assigment on system improving of those products conveying rate. On each line we have 2 points of discharging where second point conyeying rate very low and not economical to run.
The problem is I do not know where to start. I'm very grateful if anybody would give me some guide lines on that
Thanks
Hishamuddin
Malaysia ■