Demand of rapid load out systems in india

Posted in: , on 7. Apr. 2005 - 20:46

the demand for rapid load out system in india to load coal,ore and other minerals in wagons is on rising,due to the following reasons.

1.due to the increase in demand for coal,ore by power and steel plant has risen 6 times.

2.indian railway is giving now 4 hours to load the entire racke,earlier the number of hours were 10 then 6-7 and now finally 4.

3.due to the shortage of wagons

4. the pollution department is thinking to stop the loading of wagons by dumpers very soon due to the pollution .

in past, for loading of wagons.swing type chute was introduced in rapid load out systems,due to the eccentric forces by the action of this chute failure in load cells was too much and also due to the impact of material from this chute on the axle of wagons was too much.

M/S KANAWHASCALES AND SYSTEMS INC., has come up with a unique retractable type loading system where their is no eccentric loading on load cells of the bin and also no impact of material on the wagons,they have got more then 68% of the world market of load out stations with total 115 installations and 13 in china alone.this system can load up to 5500 tph,with a static weighing accuracies of plus or minus 0.1% ,this system is capable of loading a minimum of 98% of the wagons of each train to plus or minus 200 kg,s of desired weight of each wagon.this system is also approved by m/s CMPDI.

in india 100% of load out stations were installed under 3000 ton capacity conc. silo,now with this double bin system their in no need of 3000 t. conc. silo. m/s libran engineering and services are the authorised company for this system in india.

anil seth

Rapid Loading Station For Wagons

Posted on 10. Apr. 2005 - 03:10

Dear Anil

I am happy to learn you are Authorised representative of M/S KANAWHASCALES AND SYSTEMS INC.,for retractable type loading system

I agree in this system their is no eccentric loading on load cells of the bin and also no impact of material on the wagons,

I donot understand how 3000 ton capacity silois not required.

Basically we need big silo for storage of material for 1 rake. And it is not possible to feed this rate by conveyor

Are they provide two silsos of 50 percent capacity. I am not clear kindly explain the system

A R SINGH

A R SINGH DIRECTOR MODTECH MATERIAL HANDLING PROJECTS PVT LTD PLOT NO.325,SECTOR-24 FARIDABAD,HARYANA, INDIA

Rapid Loadout Systems In India

Posted on 10. Apr. 2005 - 04:56

dear mr. singh, thanks for your reply,please find below the description of the system in nutshell.-

instead of 3000t conc. silo there is now 300 t surge bin which has got 4 nos. of oulets of 1210 mm sq.,,the reclaiming facility should be around 2200-2400 tph,the level in the silo system will be hooked up with the feeding conveyor,below this surge bin there will be a 100 ton weigh bin,the bottom of this weigh bin shall be attached with retractable type loading chute having 1524 mm sq. size.

please note that this company has more then 68 % of the world market among 3 other suppliers.

plrase visit their site--www.kanawhascales.com for detailed information.

regards, anil seth