Re: Offset And Angular Tolerances Of Conveyor Belt Splicing
Hi farhadi
I would think 5 mm would be the maximum permissible for misalignment of belt ends after the completion of the splice.
A few tips to ensure the completed splice is straight:
1/ Presuming the belt ends are string lined prior to splice lay up, if so the centre belt marks should line up exactly at both sides of the splice.
2/ Checking the edges of the belt ends with the string line is also good practice if there is any doubt prior to lay-up.
3/ When the technicians are laying the cables and gum, make sure that they are string lined for straightness both sides every 5 to 10 cables.
4/ Have plenty of splice table available each side of the splice, this ensures the centre marks are well spaced.
5/ Suitable Edge bars, length, thickness and width. ■
Offset and angular tolerances of conveyor belt splicing
hello,
dear sir
i want to know about permissible tolerances (angular and offset )of convyor belt splicing (steel cord,.....).
thanks
best wishes ■