Conveyor Equipment Manufacturer
Dear Sir,
We are a professional manufacturer major in Idlers, Belt Cleaners, Skirt Rubber, Impact Bar, Pulley, Wear-Resistant Ceramic Lining Plate, and other Belt Conveyor Accessories, we established in 1981 and have an excellent reputation through more than 22 years manufacturing experience, especially in the solution and manufacturing of the conveyor idlers, belt cleaners, and etc; then we have got the certificate of ISO 9001.since years ago.
The JIM WAY products have been widely adopted by Taiwan Power Company, Mining Company, Cement Industry, Iron & Steel Corp. and industries which request rigorously quality on conveyor system. Therefore, we have dedicated to research the way to surmount the traditional steel idlers restrictions; Now, one of our most outstanding product that we had surmounted successfully is the Superior Polymer Idlers., which are made by superior polymer pipe, set with the high quality bearing and our peculiar design of 4 layers multilabyrinth that is excellent for dust and water proof, they are all tested by international rules, standardized CEMA, JIS and DIN and guaranteed by our company, The improved idlers are strongly suggested to the anti-acidic, alkaline and corrosive working sites. they are lightweight, low friction, impact resistance, anti-static and economic. Which are convenience to be applied to Concrete, Cement, Quarry, Limestone, Fertilizer, Salt, Sugar, Pulp fields and etc.
By the other side, our patented belt cleaners are very competitive internationally as well as its price, which are designed with autocompensation & shock-absorption spring tension regulator and the pressure scaling indicator that make more efficiently to install, maintain, or replace it.
Therefore, if you want to know further information or inquiry, pls just feel free to ask us, we are always glad to be in the service for you and look forward to any kind of your partnership.
In case of saving your precious time, I sincerely wish you could visit our web site: http://www.roller.com.tw
Best Regards
Santiago Chang
International Business Manager ■
Untitled
FOR AN UP-COMING PROJECT STUDY;
A) ONE SPRAY DRYER.
(PROVEN & ACCEPTABLE EQUIVALENT MAY BE SUBMITTED FOR APPROVAL.)
WE ARE LOOKING FOR SPRAY DRYER SYSTEM TO BE USED FOR THE DRYING OF INDUSTRIAL MINERALS. EQUIPMENT MUST BE NEW. PREFERABLY, THE MANUFACTURER OF THIS EQUIPMENT WOULD BE, PREFERABLY, LOCATED EITHER IN CANADA OR THE USA. AS LAST RECOURSE A EUROPEAN MANUFACTURER MAY BE BE SUBMITTED FOR ACCEPTANCE.
B) TWO, THICKNER MECHANISM
30 FT DIA. X 10 FT C/W 316 WETTED PARTS - 12-INCH MOTORIZED LIFTING DEVICE 1-1/2 HP DRIVE FITCH TYPE FEEDWEL, RAKE ARMS, BLADES & CENTER SCRAPER.
C) ROTARY VACUUM FILTER
3FT DIA. X 6 FT -316 WETTED PARTS C/W ROLL TYPE DISCHARGE - REPULPER, 1/2 HP DRIVE ASS'Y. VACUUM RECEIVER, FILTRATE PUMP & 15 HP VACUM SYSTEM.
CAN YOU PKEASE SUPPLY A LIST OF MANAUFACTURERS OF THESE TYPE OF EQUIPMENT.
THANK YOU.
REGARDS,
J. BODO
PROJECT STUDY. ■