Re:
Is this project still open for bids?
Thank you,
kathy@ampulverizer.com ■
Roller Crusher
Thank you for yopur replies, we wish to mention that the requirement is still open. Bids are being accepted.
Thank you
Vipul ■
Double Roll Crushers
We can supply MMD Twin roll Mineral sizers for this application
email priestroydplant@hotmail.com ■
Re:
Originally posted by Vipul
For a project that we have in India we have a requirement for a ‘Toothed Double Roll Coal Crusher’. These are to be supplied with complete drives, couplings, belts etc. Crusher has to be designed for large feed opening and for handling ROM coal of variable lump size upto 300 mm and product size should be (-) 37 mm.
Approximate sieve analysis of ROM coal is given below:
850 (+) to 1500 mm -- 14 %
200 (+) to 850 mm -- 19 %
below 200 mm--67 %
HGI--50
Ash content--40% to 60%
Bulk density of coal--800 (kg/cu.m)
(the above are only indicative and wide variations are experienced in practice).
The coal crusher should be capable of handling ROM coal containing total moisture upto 22% during monsoon without clogging and should have rated capacity to crush 300 TPH coal.
We hope the above information is sufficient to quote. In case you require any further information please write to us
I just came to the situation to see your requirements.
We are a crusher manufacturer based in Germany and we have been established more than 50 years ago. Since than we produced more than 5.000 crushers. We are specialized in crushing coal and lignite.
We have a technical collaboration with the Indian based company McNally Bharat.
Please let us know whether your request is still valid.
Thanks & Best Regards
Norbert Britz
Managing Director
Aubema Maschinenfabrik
D-51702 Bergneustadt/Germany
Phone: +49 2261 4094 301
Fax : +49 2261 4094 303
mobil: +49 171 413 3458
email: nbritz@aubema.de
http://www.aubema.com ■
Untitled
For a project that we have in India we have a requirement for a ‘Toothed Double Roll Coal Crusher’. These are to be supplied with complete drives, couplings, belts etc. Crusher has to be designed for large feed opening and for handling ROM coal of variable lump size upto 300 mm and product size should be (-) 37 mm.
Approximate sieve analysis of ROM coal is given below:
850 (+) to 1500 mm -- 14 %
200 (+) to 850 mm -- 19 %
below 200 mm--67 %
HGI--50
Ash content--40% to 60%
Bulk density of coal--800 (kg/cu.m)
(the above are only indicative and wide variations are experienced in practice).
The coal crusher should be capable of handling ROM coal containing total moisture upto 22% during monsoon without clogging and should have rated capacity to crush 300 TPH coal.
We hope the above information is sufficient to quote. In case you require any further information please write to us ■